2 layers104.9 × 75.2 mm
2 layers50.8 × 50.8 mm
DrumSeq
nandino/DrumSeq1Sintetizador - Secuenciador Bateria Arduino
- Size
- 50.8 × 50.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 30
- Pads
- 70
- Tracks, vias
- 73, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 10 Oct 2017
- Updated
- 10 Oct 2017
Overview
DrumSeq is an open-source printed circuit board by nandino, from the nandino/DrumSeq repository on GitHub. It is a 2-layer board of 50.8 × 50.8 mm with 19 parts on 30 nets, routed with 73 tracks and 0 vias.
It is built around the ATMEGA328-PU. Its parts include 6 capacitors, 2 resistors, 2 ICs, 2 diodes and 2 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdDrumSeq
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10uF | Capacitors_ThroughHole:C_Radial_D5_L6_P2.5 | C2, C3, C4 |
| 2 | 10k | Drum:Potentiometer_Stand | RV1, RV2 |
| 2 | 22pF | Capacitors_ThroughHole:C_Disc_D3_P2.5 | C5, C6 |
| 1 | 100nF | Capacitors_ThroughHole:C_Disc_D3_P2.5 | C1 |
| 1 | 1N4001 | Diodes_ThroughHole:Diode_DO-35_SOD27_Horizontal_RM10 | D3 |
| 1 | 1k | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R2 |
| 1 | 220 | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R7 |
| 1 | 7805 | TO_SOT_Packages_THT:TO-220_Neutral123_Horizontal | U1 |
| 1 | ATMEGA328-P | Housings_DIP:DIP-28_W7.62mm_LongPads | IC1 |
| 1 | BARREL_JACK | Pin_Headers:Pin_Header_Straight_1x03 | CON1 |
| 1 | Battery | Connect:PINHEAD1-2 | BT1 |
| 1 | Crystal | Crystals:Crystal_HC49-U_Horizontal_Typ1 | Y1 |
| 1 | JACK_2P | Connect:PINHEAD1-3 | J1 |
| 1 | LED | LEDs:LED-5MM | D6 |
| 1 | SPST | Pin_Headers:Pin_Header_Straight_1x02 | SW1 |
Questions
How big is the DrumSeq PCB?
It measures 50.8 × 50.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DrumSeq use?
19 parts, built around the ATMEGA328-PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DrumSeq KiCad files?
From the nandino/DrumSeq repository on GitHub, at the commit this page was made from: the board is Hardware/DrumSeq.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the DrumSeq design in my own project?
Its repository states no licence, so its author keeps all rights: ask nandino before reusing the design.
Similar boards
- 2 layers228 × 98 mm
- 2 layers94.6 × 46.1 mm
- 2 layers50 × 50 mm
- 2 layers284.7 × 94.2 mm
Lumberjack
peej/lumberjack-keyboard
5x12 ortholinear through-hole component keyboard PCB for standard 60% cases
165 parts403MIT - 2 layers132.1 × 45.7 mm
IPoS
peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.
42 parts342 - 2 layers63.3 × 57.2 mm
- 2 layers285 × 117 mm
