

Power module
Power Factor Corrector core board.
- Size
- 198 × 88 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 54
- Nets
- 39
- Pads
- 181
- Tracks, vias
- 423, 65
- Pours
- 61
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 16 May 2018
- Updated
- 28 Jun 2018
Overview
Power module is an open-source printed circuit board by namcho, from the namcho/PFC2k5W repository on GitHub. It is a 4-layer board of 198 × 88 mm with 54 parts on 39 nets, routed with 423 tracks and 65 vias.
It is built around the 1EDI60N12AF, C4D20120H and IDW75E60. Its parts include 19 resistors, 11 connectors, 9 capacitors, 5 diodes and 2 transistors.
Main components
31EDI60N12AF
SO-8-40℃~+125℃ 1 10A 10V~35V 120ns 125ns 4ns 5ns 650uA 9.4A MOSFET Under Voltage Protection、Short Circuit Protection SO-8 Gate Drivers ROHSInfineon TechnologiesGate DriversC4D20120H
TO-247-21.2kV 1.8V@20A 200uA@1200V 54A TO-247-2 SiC Diodes ROHSWolfspeedSiC DiodesIDW75E60
TO-247AC-3-55℃~+175℃@(Tvj) 1.65V@75A 120A 121ns 40uA@600V 600V Independent TO-247AC-3 Fast Recovery / High Efficiency Diodes ROHSInfineon TechnologiesDiodes - Fast Recovery Rectifiers
Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | R_Small | Resistors_SMD:R_1206_HandSoldering | R1, R2, R14, R19, R25, R26, R27, R28, R29, R30 |
| 6 | SCREW | NamchoLibs:SCREW_3mm | MP1, MP2, MP3, MP4, MP5, MP6 |
| 4 | 0.003 | Resistors_SMD:R_2512_HandSoldering | R8, R9, R11, R12 |
| 3 | 1u | Capacitors_SMD:C_1206_HandSoldering | C1, C16, C28 |
| 3 | Conn_02x02_Odd_Even | NamchoLibs:Conn_4pins_15A | J6, J7, J11 |
| 2 | 100n | Capacitors_ThroughHole:C_Rect_L18.0mm_W8.0mm_P15.00mm_FKS3_FKP3 | C5, C6 |
| 2 | 10k | Resistors_SMD:R_1206_HandSoldering | R31, R32 |
| 2 | 4R7 | Resistors_SMD:R_2512_HandSoldering | R16, R17 |
| 2 | C_Small | Capacitors_SMD:C_0805_HandSoldering | C17, C18 |
| 2 | Conn_01x06 | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mm | J8, J9 |
| 2 | Conn_02x03_Odd_Even | NamchoLibs:Conn_6pins_30A | J1, J2 |
| 2 | Conn_02x05_Top_Bottom | NamchoLibs:Hirose_FX30B_5P_DSA | J4, J5 |
| 2 | D_Zener_Small_ALT | Diodes_SMD:D_SOD-123 | D2, D3 |
| 2 | Q_NMOS_GDS | TO_SOT_Packages_THT:TO-247_TO-3P_Vertical | Q1, Q2 |
| 1 | 10n | Capacitors_SMD:C_0805_HandSoldering | C14 |
| 1 | 1EDI60N12AF | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U2 |
| 1 | C | Capacitors_ThroughHole:C_Rect_L18.0mm_W5.0mm_P15.00mm_FKS3_FKP3 | C3 |
| 1 | C4D20120H | TO_SOT_Packages_THT:TO-247-2_Vertical | D4 |
| 1 | Conn_01x04 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J10 |
| 1 | Conn_02x06_Counter_Clockwise | NamchoLibs:Harwin_M55_6001242R | J3 |
| 1 | CrydomM50 | NamchoLibs:CrydomM50x_Fixed | D1 |
| 1 | IDW75E60 | TO_SOT_Packages_THT:TO-247_TO-3P_Vertical | D5 |
| 1 | INDUCTOR | NamchoLibs:OD_77.80xID_39.34xHT_25.85_Vertical | L1 |
| 1 | R_Small | Resistors_SMD:R_0805_HandSoldering | R3 |
More from namcho/PFC2k5W
2- 4 layers183 × 165 mm

- 2 layers

Similar boards
- 4 layers71.8 × 109.5 mm

MCC22
ZeniteSolar/MCC22
Follow the steps below, if any value differs from the expected, abort the test. Power off and on after each step. Always limit the power source to 18V at 100mA. Use this link to find components on the board.
245 parts1 - 4 layers52.7 × 47.9 mm

AnalyzerBoxPCB fork
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
54 parts5.1kGPL-3.0 - 4 layers29.2 × 75.2 mm

PicoGUS Hand386
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
54 parts805 - 4 layers48 × 80 mm

- 4 layers27.3 × 32.3 mm

Mixer breakout
loxodes/vna
Under development open hardware microwave vector network analyzer
54 parts205 - 4 layers101 × 97 mm

Keybase
cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.
54 parts114 - 4 layers56.5 × 65 mm

- 4 layers21.6 × 62.2 mm

4layers
jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.
54 parts100BSD-3-Clause
Questions
How big is the Power module PCB?
It measures 198 × 88 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Power module use?
54 parts, built around the 1EDI60N12AF, C4D20120H and IDW75E60. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Power module KiCad files?
From the namcho/PFC2k5W repository on GitHub, at the commit this page was made from: the board is Power/power_module.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Power module design in my own project?
Its repository states no licence, so its author keeps all rights: ask namcho before reusing the design.