

Master node
- Size
- 130 × 125 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 52
- Nets
- 100
- Pads
- 245
- Tracks, vias
- 227, 12
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 21 Oct 2023
- Updated
- 16 Dec 2023
Overview
Master node is an open-source printed circuit board by naichenzhao, from the naichenzhao/EECS106A_MRI_Robot repository on GitHub. It is a 2-layer board of 130 × 125 mm with 52 parts on 100 nets, routed with 227 tracks and 12 vias.
It is built around the UA78M05IDCYR and UA78M33CDCYR. Its parts include 25 connectors, 7 resistors, 6 switches, 4 capacitors and 3 ICs.
Main components
2UA78M05IDCYR
SOT-223-40℃~+125℃@(Tj) 1 200uV 25V 2V 500mA 5V 62dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection Positive SOT-223-4 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsUA78M33CDCYR
SOT-2230℃~+125℃@(Tj) 1 25V 2V 3.3V 40uV 500mA 62dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdEECS106A_Project
Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R4, R5, R6, R7 |
| 4 | MountingHole | MountingHole:MountingHole_5.3mm_M5_DIN965 | H1, H2, H3, H4 |
| 2 | .1 uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3 |
| 2 | .33 uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | 290 | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R1 |
| 1 | A1_Enable | Button_Switch_THT:SW_CuK_OS102011MA1QN1_SPDT_Angled | SW3 |
| 1 | A1_Encoder | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J10 |
| 1 | A1_Home_SW | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J23 |
| 1 | A1_Power | Connector_AMASS:AMASS_XT60-F_1x02_P7.20mm_Vertical | J17 |
| 1 | A1_Stepper | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | A2_Enable | Button_Switch_THT:SW_CuK_OS102011MA1QN1_SPDT_Angled | SW5 |
| 1 | A2_Encoder | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J11 |
| 1 | A2_Home_SW | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J24 |
| 1 | A2_Power | Connector_AMASS:AMASS_XT60-F_1x02_P7.20mm_Vertical | J18 |
| 1 | A2_Stepper | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | NUCLEO-F446RE | MODULE_NUCLEO-F446RE:MODULE_NUCLEO-F446RE | U1 |
| 1 | R_Enable | Button_Switch_THT:SW_CuK_OS102011MA1QN1_SPDT_Angled | SW6 |
| 1 | R_Encoder | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J12 |
| 1 | R_Home_SW | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J25 |
| 1 | R_Power | Connector_AMASS:AMASS_XT60-F_1x02_P7.20mm_Vertical | J19 |
| 1 | R_Stepper | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | UA78M05IDCYR | Package_TO_SOT_SMD:SOT-223 | U3 |
| 1 | UA78M33CDCYR | Package_TO_SOT_SMD:SOT-223 | U2 |
| 1 | XT60-in | Connector_AMASS:AMASS_XT60-F_1x02_P7.20mm_Vertical | J13 |
| 1 | X_Enable | Button_Switch_THT:SW_CuK_OS102011MA1QN1_SPDT_Angled | SW1 |
| 1 | X_Encoder | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | X_Home_SW | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J20 |
| 1 | X_Power | Connector_AMASS:AMASS_XT60-F_1x02_P7.20mm_Vertical | J14 |
| 1 | X_Stepper | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | Y _Power | Connector_AMASS:AMASS_XT60-F_1x02_P7.20mm_Vertical | J15 |
| 1 | Y_Enable | Button_Switch_THT:SW_CuK_OS102011MA1QN1_SPDT_Angled | SW2 |
| 1 | Y_Encoder | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | Y_Home_SW | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J21 |
| 1 | Y_Stepper | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Z_Enable | Button_Switch_THT:SW_CuK_OS102011MA1QN1_SPDT_Angled | SW4 |
| 1 | Z_Encoder | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J9 |
| 1 | Z_Home_SW | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J22 |
| 1 | Z_Power | Connector_AMASS:AMASS_XT60-F_1x02_P7.20mm_Vertical | J16 |
| 1 | Z_Stepper | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
Similar boards
- 4 layers42 × 42 mm

- 2 layers61.3 × 77 mm

Ahrs can adapter
gpgreen/ahrs-can-adapter
Kicad design for Pixhawk 4 flight board to CAN network adapter
44 partsMIT - 4 layers122 × 102 mm

EXO PCB 1
Prosthetics-Exoskeleton/Grip_Exo_PCB_V1
KiCAD design files for first iteration of grip exoskeleton PCB. Contains 10 sensor ports and space for 5 sets of solenoid valves
120 parts - 2 layers76.2 × 73.7 mm

- 2 layers100 × 100 mm

HotBox
sundr007/HotBox
A benchtop thermal Chamber used to test electronics at elevated ambient temperature. Kicad PCB, STM32 firmware, OpenScad Mechanical
38 parts1GPL-2.0 - 4 layers90.3 × 98 mm

RPi Pico W A4988 control board
Ironman-007/PCBPT
This is a system that can help directly connect the schematic of the PCB design with test equipment (oscilloscope. etc,).
93 parts11 - 2 layers100 × 75 mm

- 2 layers87 × 59.9 mm

Can breakout
LunarKnights/SN65HVD257-breakout
Breakout board for SN65HVD257 CAN transceiver for use with Jetson TX2
53 parts
Questions
How big is the Master node PCB?
It measures 130 × 125 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Master node use?
52 parts, built around the UA78M05IDCYR and UA78M33CDCYR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Master node KiCad files?
From the naichenzhao/EECS106A_MRI_Robot repository on GitHub, at the commit this page was made from: the board is master_node/master_node.kicad_pcb and its schematic master_node/master_node.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Master node design in my own project?
Its repository states no licence, so its author keeps all rights: ask naichenzhao before reusing the design.