Skip to the content
2 layersKicad placa, the printed circuit board in 3D

Kicad placa

nahucvc/Tejada
Copper layers
2
Thickness
1.6 mm
Parts
22
Nets
56
Pads
114
Tracks, vias
268, 4
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
12 Apr 2025
Updated
26 May 2026

Overview

Kicad placa is an open-source printed circuit board by nahucvc, from the nahucvc/Tejada repository on GitHub. It is a 2-layer board with 22 parts on 56 nets, routed with 268 tracks and 4 vias.

It is built around the EL817. Its parts include 7 connectors, 6 resistors, 5 diodes, 3 ICs and 1 capacitor. It belongs with the ESP32 boards of this library.

Main components

1

Parts

22
QtyValueFootprintReferences
41kResistor_SMD:R_0603_1608MetricR1, R3, R4, R6
3LEDLED_THT:LED_D3.0mmD3, D4, D5
21N914Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1, D2
2270Resistor_SMD:R_0603_1608MetricR2, R5
2EL817Package_DIP:DIP-4_W7.62mmU2, U3
1470uCapacitor_THT:CP_Radial_D7.5mm_P2.50mmC1
1Control MotorConnector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_VerticalJ2
1Control Puente HConnector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_VerticalJ3
1ESP32Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_VerticalJ6
1Energia Puente HJST:JST_EH_B2B-EH-A_1x02_P2.50mm_VerticalJ4
1FuenteConnector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_VerticalJ1
1PotenciometroConnector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_VerticalJ5
1Screw_Terminal_01x12TerminalBlock:TerminalBlock_Xinya_XY308-2.54-12P_1x12_P2.54mm_HorizontalJ7
1~STM32G431:STM32G431U1

More from nahucvc/Tejada

1
  • 2 layersPlaca, the printed circuit board in 3D

    Placa

    nahucvc/Tejada

    4 parts

Similar boards

  • 2 layers123 × 87.5 mmFastLOGIC, the printed circuit board in 3D

    FastLOGIC

    Neumi/fastLOGIC

    An affordable Arduino-based board designed for straightforward (industrial) logic control, ideal for building small-scale automation and control solutions.

    180 parts23MIT
  • 2 layers140.7 × 47.4 mmEG8010 A1, the printed circuit board in 3D

    EG8010 A1

    Millisman/EG8010

    Collection of designs for the EG8010 (ASIC for single-phase SPWM control H-bridge)

    201 parts17MIT
  • 4 layers97.5 × 99.9 mmEsp32 wled controller, the printed circuit board in 3D

    Esp32 wled controller

    fellettigiacomo/esp32-WLED-4ch-controller

    Open source 4 Channel esp32-powered WLED controller with 4 relays and built in level shifter

    100 parts16CERN-OHL-S-2.0
  • 2 layers37 × 90 mmESP32-BLE GSM, the printed circuit board in 3D

    ESP32-BLE GSM

    shridattdudhat/ESP01-MOSFET-Control

    Control LED or DC Motor using ESP-01!

    43 parts5
  • 2 layers85.1 × 75.6 mmSpotWelderTrigger, the printed circuit board in 3D

    SpotWelderTrigger

    maciejkwasek/SpotWelderTrigger_Hw

    Hardware for SpotWelderController.

    37 parts4MIT
  • 2 layers70 × 30 mmStrober board, the printed circuit board in 3D

    Strober board

    Ardenryst/pinball-led-strober

    Device to trigger mods via existing lights.

    25 parts3MIT
  • 2 layers45 × 38 mmHum contr, the printed circuit board in 3D

    Hum contr

    VGCH/smart-humidifier

    Smart controller for Xiaomi humidifier

    20 parts3
  • 2 layers51.6 × 18.5 mmAnavi opto isolator, the printed circuit board in 3D

    Anavi opto isolator

    AnaviTechnology/anavi-opto-isolator

    Opto-isolator board for Arduino, ESP32, Raspberry Pi, etc. Supports 12V to 3.3V, 12V to 5V, 24V to 3.3V, 24V to 5V.

    6 parts2

Questions

What parts does the Kicad placa use?

22 parts, built around the EL817. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Kicad placa KiCad files?

From the nahucvc/Tejada repository on GitHub, at the commit this page was made from: the board is ControlAuto/Diseño Placas kicad/kicad STM32/kicad placa.kicad_pcb and its schematic ControlAuto/Diseño Placas kicad/kicad Esp32-ETH/ETH/placa.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Kicad placa design in my own project?

Its repository states no licence, so its author keeps all rights: ask nahucvc before reusing the design.