

LimeSDR Breakout
LimeSDR GPIO Board
- Size
- 60 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 96
- Nets
- 68
- Pads
- 328
- Tracks, vias
- 2,265, 397
- Pours
- 18
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 19 Feb 2018
- Updated
- 21 Feb 2018
Overview
LimeSDR Breakout is an open-source printed circuit board by myriadrf, from the myriadrf/LimeSDR_GPIO_Board repository on GitHub. It is a 2-layer board of 60 × 100 mm with 96 parts on 68 nets, routed with 2,265 tracks and 397 vias.
It is built around the 74LVC1T45W6, ULN2003A and BC847. Its parts include 32 resistors, 20 capacitors, 11 ICs, 9 diodes and 8 transistors. It belongs with the interfaces and adapters boards of this library.
Main components
374LVC1T45W6
SOT-26-40℃~+125℃ 1 1 1.65V~5.5V 1.65V~5.5V Bidirectional Power-Off Protection Tri-State SOT-26 Translators, Level Shifters ROHSDiodes IncorporatedTranslators, Level ShiftersULN2003A
SOP-16-40℃~+85℃ 0.93mA 100uA 15pF 20uA 30V 50V Seven channels SOP-16 Darlington Transistor Arrays ROHSUMWDarlington Transistor ArraysBC847
SOT-231 NPN 100MHz 100mA 100nA 110 200mW 45V 500mV 6V NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)
README
README.mdLimeSDR GPIO Board

The LimeSDR GPIO Board is an expansion board for the LimeSDR family that provides individually settable, bi-directional level-shifted I/O for FPGA GPIO 0-7. Each I/O has a high-voltage and power Darlington drive stage suitable for inductive loads, such as coaxial relays.
- Provides bi-directional level shifted IO for GPIO 0-7
- 1.2-5.5V IO on J2
- Each IO has a high voltage and power Darlington drive stage
- Acceptable rating 30V 300mA (0-4) 200mA (5-7)
- Suitable for inductive loads
- Input/Output are individually switch-able
- LimeSDR form factor
- Individually pluggable relay connections
Contents
The directory structure is as follows:
hardware/<variant>/<version>/
Equivalent Circuits/
Project Outputs/ - BOM, rule check reports, Gerbers, pick & place files, PDFs
software/
examples/ - Simple software examplesChangelog
| Version | Date | Summary |
|---|---|---|
| 0402 CAD2 | 21/02/18 | First production version |
Licence
LimeSDR GPIO Board copyright 2018 AB Open Ltd.

This work is licensed under a Creative Commons Attribution 4.0 International License.
Parts
96| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 1uF 16V 0402 | Capacitors_SMD:C_0402 | C1, C3, C4, C6, C7, C8, C11, C12, C15, C16 |
| 8 | 0R | Capacitors_SMD:C_0402 | R1, R2, R3, R4, R5, R6, R7, R8 |
| 8 | 100nF 1206 50V | Capacitors_SMD:C_1206 | C9, C10, C13, C17, C18, C19, C20, C21 |
| 8 | 220R | Capacitors_SMD:C_0402 | R37, R38, R43, R44, R49, R50, R55, R56 |
| 8 | 47k | Capacitors_SMD:C_0402 | R33, R34, R39, R40, R45, R46, R51, R52 |
| 8 | 74LVC1T45 | TO_SOT_Packages_SMD:SOT-363_SC-70-6_Handsoldering | U4, U5, U6, U7, U8, U9, U10, U11 |
| 8 | BC847 | TO_SOT_Packages_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 8 | DNI | Capacitors_SMD:C_0402 | R25, R26, R27, R28, R29, R30, R31, R32 |
| 8 | LED | LEDs:LED_0805 | D2, D3, D4, D5, D6, D7, D8, D9 |
| 3 | ULN2003A | Housings_SOIC:SOIC-16_3.9x9.9mm_Pitch1.27mm | U1, U2, U3 |
| 2 | CONN_02X05 | Pin_Headers:Pin_Header_Straight_2x05_Pitch1.27mm_SMD | J1, J23 |
| 2 | Screw_Terminal_1x08 | KiCad:RS_189_6060_R | J4, J5 |
| 1 | 10K | Resistors_SMD:R_Array_Convex_4x0603 | RN1 |
| 1 | 10k | Resistors_SMD:R_Array_Convex_4x0603 | RN2 |
| 1 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J3 |
| 1 | CONN_02X05 | Pin_Headers:Pin_Header_Straight_2x05_Pitch2.54mm_SMD | J2 |
| 1 | CP | Capacitors_THT:CP_Radial_D10.0mm_P5.00mm | C2 |
| 1 | DIP_8_SW_IKD0803101 | KiCad:DIP_W7.40_Gull-Wing-J | SW1 |
| 1 | DNI | Capacitors_SMD:C_1206 | C14 |
| 1 | GS0T03C_SOT23 | TO_SOT_Packages_SMD:SOT-23 | D1 |
| 1 | LOGO | CuGFX:GND_Electronics_cu_13mm_B | G*** |
| 1 | LOGO | Test:Kicad_GND_Electronics_black | G*** |
| 1 | Screw_Terminal_1x02 | KiCad:RS_189-6105_reversed | J6 |
The 92 most common of 96 parts.
Similar boards
- 6 layers141.1 × 178.5 mm

- 4 layers95.6 × 73.6 mm

- 2 layers287.8 × 126.7 mm

- 4 layers114 × 87.7 mm

- 4 layers137 × 141 mm

- 6 layers90.1 × 135 mm

- 8 layers145 × 139 mm

Latentpink
azonenberg/latentpacket
The LATENTPACKET network infrastructure platform
841 parts30BSD-3-Clause - 6 layers34 × 30.2 mm

USB LiDAR VL53L9
RemiFM/USB-LiDAR-VL53L9
USB accessory device with VL53L9 Time of Flight sensor (dToF 3D LiDAR) & 6-axis IMU
72 parts24MIT
Questions
How big is the LimeSDR Breakout PCB?
It measures 60 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LimeSDR Breakout use?
96 parts, built around the 74LVC1T45W6, ULN2003A and BC847. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LimeSDR Breakout KiCad files?
From the myriadrf/LimeSDR_GPIO_Board repository on GitHub, at the commit this page was made from: the board is hardware/0402_Variant/CAD2/LimeSDR_Breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the LimeSDR Breakout design in my own project?
Its repository states no licence, so its author keeps all rights: ask myriadrf before reusing the design.