

Muons SIPM V2
- Size
- 151 × 114.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 142
- Nets
- 138
- Pads
- 524
- Tracks, vias
- 1,101, 316
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 3 May 2024
- Updated
- 15 Jul 2024
Overview
Muons SIPM V2 is an open-source printed circuit board by myhumankit, from the myhumankit/Detecteur_de_muons repository on GitHub. It is a 2-layer board of 151 × 114.1 mm with 142 parts on 138 nets, routed with 1,101 tracks and 316 vias.
It is built around the LT1806CS8, AD823AN and DS18B20, with the G3VM-101DR1, LM311 and MAX988EUK+T among its other parts. Its parts include 40 resistors, 26 capacitors, 16 connectors, 13 ICs and 7 diodes.
Main components
11LT1806CS8
SOIC8325MHz, Rail-to-Rail Input and Output, Low Distortion, Low-Noise, Precision Operational AmplifierAnalog DevicesUncategorisedAD823AN
PDIP-8-40℃~+85℃ 16mA 2 25V/us 2pA 2uV/℃ 5.2mA 5pA 76dB 800uV High capacitive load driving Rail-to-rail output PDIP-8 FET Input Amplifiers ROHSAnalog DevicesFET Input AmplifiersDS18B20
TO-92-55℃~+125℃ 12bit 3V~5.5V 750ms Single-bus ±0.4℃ TO-92 Temperature Sensors ROHSUMWTemperature SensorsG3VM-101DR1
SMD-4P1 Form A (SPST-NO) 100V 2A SMD-4P Solid State Relays (Triac Output) ROHSOmronSolid State Relays (Triac Output)LM311
SOP-80℃~+70℃ 1 1.7nA 2.4mA 200ns 2mV 36V 45nA 5V~30V TTL、CMOS ±15V SOP-8 Comparators ROHSGcoreComparatorsMAX988EUK+T
SOT-23-5-40℃~+85℃ 1 120ns 1nA 2.5mV 48uA 500uV Built-in hysteresis Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5 Comparators ROHSMaxim Integrated (Analog Devices)ComparatorsNEO-M8N
Uncategorisedu-bloxBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsDS3231S#
RTC, I²C, ±3.5ppm, SOIC16Maxim Integrated (Analog Devices)UncategorisedG3VM-21GR1
SOP-4-20℃~+185℃ 1.15V 1.5kV 1000MΩ 1Ω 20V 300mA 500us 500us 50mA SOP-4 Solid State Relays (MOS Output) ROHSOmronSolid State Relays (MOS Output)G3VM-41DY
SMD-4P1.27V 2.8ms 2A 300us 40V 5kV 90mΩ One set normally open: 2A (SPST - normally open) SMD-4P Solid State Relays (MOS Output) ROHSOmronSolid State Relays (MOS Output)
Parts
142| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 10k | COMPOSANT_CF:R_0805_Muons | R1, R6, R10, R13, R14, R16, R17, R18, R19, R20, R21 |
| 10 | 1k | COMPOSANT_CF:R_0805_Muons | R3, R4, R8, R9, R12, R15, R23, R24, R26, R27 |
| 7 | 0.1µF | COMPOSANT_CF:C_0805_Muons | C1, C3, C5, C7, C8, C11, C14 |
| 7 | 10µF | COMPOSANT_CF:C_0805_Muons | C10, C15, C17, C19, C20, C21, C22 |
| 5 | 100k | COMPOSANT_CF:R_0805_Muons | R7, R22, R29, R30, R31 |
| 5 | 100nF | COMPOSANT_CF:C_0805_Muons | C16, C18, C23, C25, C26 |
| 5 | ESP | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad_TopBottom | H7, H8, H9, H13, H14 |
| 4 | 47k | COMPOSANT_CF:R_0805_Muons | R35, R36, R37, R38 |
| 4 | Board_SiMP | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad_TopBottom | H3, H4, H5, H6 |
| 4 | GND1 | COMPOSANT_CF:TestPoint_THTPad_4.75x3.7mm_Drill1.5mm | TP4, TP5, TP6, TP7 |
| 3 | 1µF | COMPOSANT_CF:C_0805_Muons | C2, C9, C24 |
| 3 | D_Schottky | Diode_SMD:D_SOD-123 | D1, D2, D3 |
| 3 | MDB301 | Package_TO_SOT_SMD:SOT-23 | D4, D5, D6 |
| 3 | RTC | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad_TopBottom | H10, H11, H12 |
| 2 | 0 | COMPOSANT_CF:R_Shunt_0805_Muons | R33, R34 |
| 2 | 221790-1 | COMPOSANT_CF:TE_221790-1 | J2, J4 |
| 2 | 330 | COMPOSANT_CF:R_0805_Muons | R39, R40 |
| 2 | 4.7k | Potentiometer_THT:Potentiometer_Bourns_3005_Horizontal | RV1, RV2 |
| 2 | 5k | Potentiometer_SMD:Potentiometer_Bourns_3314G_Vertical | RV3, RV4 |
| 2 | ESP | COMPOSANT_CF:MountingHole_2.2mm_M2 | H15, H16 |
| 2 | LT1806 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3, U4 |
| 2 | SiMP | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad_TopBottom | H1, H2 |
| 2 | s1 | COMPOSANT_CF:TestPoint_THTPad_4.75x3.7mm_Drill1.5mm | TP1, TP2 |
| 1 | 0.47µF | COMPOSANT_CF:C_0805_Muons | C6 |
| 1 | 10pF | COMPOSANT_CF:C_0805_Muons | C12 |
| 1 | 20nF | COMPOSANT_CF:C_0805_Muons | C13 |
| 1 | 226k | COMPOSANT_CF:R_0805_Muons | R2 |
| 1 | 22pF | COMPOSANT_CF:C_0805_Muons | C4 |
| 1 | 3.3k | COMPOSANT_CF:R_0805_Muons | R25 |
| 1 | 360 | COMPOSANT_CF:R_0805_Muons | R32 |
| 1 | 4.7M | COMPOSANT_CF:R_0805_Muons | R11 |
| 1 | 4.7k | COMPOSANT_CF:R_0805_Muons | R28 |
| 1 | 47µH | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | L2 |
| 1 | 7.5k | COMPOSANT_CF:R_0805_Muons | R5 |
| 1 | AD823A | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | ADC_Breakout_ADS1015 | MODULE_CF:ADS1115_Small_BreakBord | U10 |
| 1 | Ajust_Time | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx83-2LFS | SW1 |
| 1 | BMBT3904 | Package_TO_SOT_SMD:SOT-323_SC-70 | Q1 |
| 1 | BMP280_AZ | COMPOSANT_CF:BMP280_AZ | IC1 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | Blindage | COMPOSANT_CF:Blindage_29.5 | B1 |
| 1 | Conn_01x06_Socket | Connector_Molex:Molex_KK-254_AE-6410-06A_1x06_P2.54mm_Vertical | J6 |
| 1 | Conn_01x07_Socket | Connector_Molex:Molex_KK-254_AE-6410-07A_1x07_P2.54mm_Vertical | J5 |
| 1 | Conn_01x08_Socket | Connector_Molex:Molex_KK-254_AE-6410-08A_1x08_P2.54mm_Vertical | J7 |
| 1 | Conn_01x08_Socket | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J12 |
| 1 | Conn_01x08_Socket | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J13 |
| 1 | DB9 F Chassi | Connector_Dsub:DSUB-9_Female_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mm | J3 |
| 1 | DS18B20 | Package_TO_SOT_THT:TO-92_Inline | U5 |
| 1 | DS3231 | COMPOSANT_CF:REG_DS3231_2023 | M1 |
| 1 | Depuis le board SIPM | Connector_Molex:Molex_KK-254_AE-6410-08A_1x08_P2.54mm_Vertical | J8 |
| 1 | Depuis le board SIPM | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J9 |
| 1 | Double Led | COMPOSANT_CF:Double_Led | Led1 |
| 1 | ESP_WROOM_32_38b_AZ | COMPOSANT_CF:MODULE_ESP32-DEVKITC | M2 |
| 1 | Ferrite Bead | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | L1 |
| 1 | G3VM-101DR1 | COMPOSANT_CF:G3VM-21GR1 | U11 |
| 1 | G3VM-21GR1 | COMPOSANT_CF:G3VM-21GR1 | K1 |
| 1 | G3VM-41DY | COMPOSANT_CF:RELAY_G3VM-41DY | K2 |
| 1 | G3VM-81UR | COMPOSANT_CF:G3VM-81UR | K3 |
| 1 | GND | COMPOSANT_CF:TestPoint_THTPad_4.75x3.7mm_Drill1.5mm | Cn1 |
| 1 | GND2 | COMPOSANT_CF:TestPoint_THTPad_4.75x3.7mm_Drill1.5mm | TP8 |
| 1 | GND3 | COMPOSANT_CF:TestPoint_THTPad_4.75x3.7mm_Drill1.5mm | TP3 |
| 1 | GT1167 | COMPOSANT_CF:DIP-12_Convertisseur | U9 |
| 1 | LM311 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | LT3461 | Package_TO_SOT_SMD:TSOT-23-6 | U1 |
| 1 | MAX988EUK+ | COMPOSANT_CF:SOT95P280X145-5N | U8 |
| 1 | Micro_SD_Card | COMPOSANT_CF:SD-CARD_AZ | J15 |
| 1 | NEO-M8N | MODULE_CF:GPS_NEO8 | U6 |
| 1 | Oled | COMPOSANT_CF:OLED_PCB | J14 |
| 1 | Regul3.3v | COMPOSANT_CF:Regulateur | U12 |
| 1 | SW_Coded_SH-7010 | COMPOSANT_CF:Nidec_Copal_SC-1110 | SW2 |
| 1 | Vers Pcb GPS | Connector_Molex:Molex_KK-254_AE-6410-06A_1x06_P2.54mm_Vertical | J10 |
| 1 | Vers Pcb Gps | Connector_Molex:Molex_KK-254_AE-6410-07A_1x07_P2.54mm_Vertical | J11 |
| 1 | WM17457-ND | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical | J1 |
More from myhumankit/Detecteur_de_muons
4- 2 layers75 × 69 mm

- 2 layers75 × 61.8 mm

- 2 layers75 × 26.5 mm

- 2 layers75 × 50.6 mm

Similar boards
- 2 layers

Arduino Light Flicker Measure PCB
WolfgangFranke/LightFlickerMeasure
Measures flickering lights, like PWM driven LED-systems, using Arduino Nano.
35 parts10GPL-3.0 - 2 layers45 × 85 mm

- 2 layers65.4 × 41.9 mm

- 2 layers95 × 75 mm

Battery predictor
touhidsiddiqueeraj-bit/Multi-Horizon-Hazard-Models-for-Battery-Failure-Prediction
This study extends an existing multi-horizon hazard classification framework—originally developed for NASA 18650 cells using Histogram-based Gradient Boosting (HGB)—to three additional datasets (CALCE LCO/CX2, Oxford…
25 parts1 - 2 layers147.3 × 95.3 mm

Nixie proj conflict-20171112-163801
dm2lct/tlnixie
PCB files for the Turmlabor nixie clock 2.0
117 parts11GPL-3.0 - 2 layers250 × 56 mm

Klock pcb
adriansalamon/clock-clock-24
Moved to https://git.salamon.xyz/adrian/clock-clock-24
45 parts1GPL-3.0 - 2 layers

- 2 layers76.2 × 76.2 mm

Questions
How big is the Muons SIPM V2 PCB?
It measures 151 × 114.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Muons SIPM V2 use?
142 parts, built around the LT1806CS8, AD823AN, DS18B20 and G3VM-101DR1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Muons SIPM V2 KiCad files?
From the myhumankit/Detecteur_de_muons repository on GitHub, at the commit this page was made from: the board is PCB files/Muons_V2_OK_Fichier_Prod/Muons_SIPM_V2.kicad_pcb and its schematic PCB files/Muons_V2_OK_Fichier_Prod/Muons_SIPM_V2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Muons SIPM V2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask myhumankit before reusing the design.