
Lighthouse display
mwuerms/lighthouse_hardware
+ lighthouse + buoy: hand sender, ble advertising

+ lighthouse + buoy: hand sender, ble advertising
Lighthouse base is an open-source printed circuit board by mwuerms, from the mwuerms/lighthouse_hardware repository on GitHub, published under the MIT licence. It is a 4-layer board of 90 × 66.3 mm with 75 parts on 102 nets, routed with 842 tracks and 114 vias.
It is built around the R-78E5.0-1.0, RV-3028-C7 and TLV75533PDBV, with the B130-13-F(MS), 9HT11-32.768KDZB-T and DF2S16FS,L3M among its other parts. Its parts include 17 resistors, 16 capacitors, 10 connectors, 9 ICs and 5 diodes. It belongs with the STM32 boards of this library.
buoy will be soldered together using wire only, no pcb for this.

just a collection of (maybe) useful links
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP4, TP10, TP11, TP12, TP13, TP15, TP21, TP22, TP23, TP24 |
| 7 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C7, C12 |
| 6 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8, C9, C10, C11, C13, C14 |
| 4 | 0R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R8, R9, R10 |
| 3 | 1M | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R11, R12 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R15 |
| 2 | 12.5pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C15, C16 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16, R17 |
| 2 | 22R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4 |
| 2 | 4k7 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13, R14 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6 |
| 2 | B130-13-F | Diode_SMD:D_SMA_Handsoldering | D1, D3 |
| 2 | Conn_01x12 | Connector_Molex:Molex_Picoflex_90325-0012_2x06_P1.27mm_Vertical | J4, J5 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6 |
| 1 | 9HT11-32.768KDZB-T | Lighthouse1:9HT1132768KDZBT | Y1 |
| 1 | AT25SF081-SSHD-X | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_CUI_PJ-063AH_Horizontal | J1 |
| 1 | Battery_Cell | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J9 |
| 1 | Conn_01x05 | Connector_PinHeader_1.27mm:PinHeader_1x05_P1.27mm_Vertical | J8 |
| 1 | Conn_01x06 | Connector_Molex:Molex_Picoflex_90325-0006_2x03_P1.27mm_Vertical | J6 |
| 1 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J10 |
| 1 | Conn_01x07 | Connector_PinHeader_1.27mm:PinHeader_1x07_P1.27mm_Vertical | J3 |
| 1 | DF2S16FS | Diode_SMD:D_SOD-523 | D2 |
| 1 | DMP3099L | Package_TO_SOT_SMD:SOT-23-3 | Q1 |
| 1 | Jumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged2Bar12_RoundedPad1.0x1.5mm | JP1 |
| 1 | Keystone 3002 | Battery:BatteryHolder_Keystone_3002_1x2032 | BT2 |
| 1 | MCP111T-xxxE_TT | Package_TO_SOT_SMD:SOT-23-3 | U4 |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | PMEG4002EJ | Diode_SMD:D_SOD-323F | D5 |
| 1 | PRTR5V0U2X | Package_TO_SOT_SMD:SOT-143 | D4 |
| 1 | R-78E5.0-1.0 | Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THT | U1 |
| 1 | RV-3028-C7 | Package_SON:MicroCrystal_C7_SON-8_1.5x3.2mm_P0.9mm | U7 |
| 1 | STM32L412RBTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U5 |
| 1 | TLV75533PDBV | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_GCT_USB4110 | J2 |
| 1 | ~ | lighthouse:BC805M | U9 |
| 1 | ~ | lighthouse:PTS526 | SW1 |
| 1 | ~ | lighthouse:DFPlayer_Mini-TF-16P | U8 |

mwuerms/lighthouse_hardware
+ lighthouse + buoy: hand sender, ble advertising

mwuerms/lighthouse_hardware
+ lighthouse + buoy: hand sender, ble advertising


Louisiana-State-Rocketry/FLCM0001-A03_PCB
PCB Files for the Eclipse 2 Flight Computer.





SP8EBC/radio-usb-interface
USB <--> Land Mobile Radio interace with full ground isolation on 2way audio and PTT control

It measures 90 × 66.3 mm and has 4 copper layers, 1.6 mm thick.
75 parts, built around the R-78E5.0-1.0, RV-3028-C7, TLV75533PDBV and B130-13-F(MS). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mwuerms/lighthouse_hardware repository on GitHub, at the commit this page was made from: the board is kicad/lighthouse_base/lighthouse_base.kicad_pcb and its schematic kicad/lighthouse_base/lighthouse_base.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).