
LTC3110 supercap backup
mvalancy/IC_Breakouts
See Getting started for the project files and legacy KiCad notes.

See Getting started for the project files and legacy KiCad notes.
As7265x color sensors is an open-source printed circuit board by mvalancy, from the mvalancy/IC_Breakouts repository on GitHub. It is a 4-layer board of 55 × 50 mm with 57 parts on 60 nets, routed with 566 tracks and 69 vias.
It is built around the SP3012-06UTG. Its parts include 13 resistors, 7 capacitors, 6 diodes, 4 ICs and 3 connectors. It belongs with the sensors and measurement boards of this library.
Various breakout boards for ICs I like
See Getting started for the project files and legacy KiCad notes.
S6AE101A_solar_harvester -

"The S6AE101A is a power management IC (PMIC) for energy harvesting that is built into circuits of solar cells connected in series, output power control circuits, output capacitor storage circuits, and power switching circuits of primary batteries. Super-low-power operation is possible using a consumption current of only 250 nA and startup power of only 1.2 μW. As a result, even slight amounts of power generation can be obtained from compact solar cells under low-brightness environments of approximately 100 lx."
LTC3110_supercap_backup -

"The LTC3110EFE#PBF is a bidirectional buck-boost DC to DC regulator with capacitor charger and balancer in 24 pin TSSOP package. Its wide 0.1V to 5.5V capacitor/battery voltage and 1.8V to 5.25V system backup voltage ranges make it well suited to wide variety of backup applications using super capacitors or batteries. A proprietary low noise switching algorithm optimizes efficiency with capacitor/battery voltages that are above, below or equal to system output voltage. The LTC3110 can autonomously perform transition from charge to backup mode or switch modes based on an external command. Pin selectable burst mode operation reduces standby current and improves light load efficiency which combined with 1μA shutdown current make the LTC3110 ideally suited for backup applications. The device also includes voltage supervisors for direction control and end of charge, general purpose comparator with open collector output for interfacing with microcontroller."
as7265x_color_sensors -
"The 18-channel 3-chip calibrated visible through near-infrared chipset is ideal for emerging spectral sensing applications such as horticulture, fluid quality/spectral component analysis and complex spectral identification, including anti-counterfeiting and authentication. Today’s announcement brings the new 2017 offerings from the AS726x multispectral sensing products to 4 unique solution sets, including 6-channel visible, near-IR, true color and 18-channel family members.
The AS7265x chipset consists of 3 highly integrated 6-channel sensor devices, each only 4.5 x 4.4 x 2.5mm, in efficient land-grid array packages with integrated apertures. The master-slave-slave architecture appears as a single logical device, simplifying system integration and decreasing time to market. The 18-channels span wavelengths from 410 to 940nm with 20nm filter widths."
| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | TestPoint | Connector_Pin:Pin_D1.0mm_L10.0mm_LooseFit | TP1, TP2, TP3, TP4, TP5, TP6, TP8, TP9, TP10, TP11, TP12, TP13, TP14, TP15, TP17 |
| 6 | LED_Small | LED_SMD:LED_1206_3216Metric | D1, D2, D3, D4, D5, D6 |
| 6 | R_Small | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R6 |
| 4 | 10K | Resistor_SMD:R_0805_2012Metric | R10, R11, R12, R13 |
| 3 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric | C4, C5, C6 |
| 3 | SP3012-06UTG | MRV_SMD_Packages:uDFN-14_3.5x1.35x0.5mm | TVS1, TVS2, TVS3 |
| 2 | Polyfuse | Capacitor_SMD:C_1206_3216Metric | F1, F2 |
| 2 | RJ12 | Connector_RJ:RJ12_Amphenol_54601 | J2, J3 |
| 1 | 0R | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | AS72651 | MRV_SMD_Packages:LGA-20_4.5mm_4.7mm_2.5mm | U1 |
| 1 | AS72652 | MRV_SMD_Packages:LGA-20_4.5mm_4.7mm_2.5mm | U2 |
| 1 | AS72653 | MRV_SMD_Packages:LGA-20_4.5mm_4.7mm_2.5mm | U3 |
| 1 | AT25SF041 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | Conn_01x06_Male | Connector_Harwin:Harwin_M20-89006xx_1x06_P2.54mm_Horizontal | J1 |
| 1 | DNP | Resistor_SMD:R_0805_2012Metric | R8 |
The 53 most common of 57 parts.

mvalancy/IC_Breakouts
See Getting started for the project files and legacy KiCad notes.

mvalancy/IC_Breakouts
See Getting started for the project files and legacy KiCad notes.

Junkz3/wrench-board
A senior microsoldering technician, available to every repair shop from the seasoned pro to the apprentice. Powered by Claude Opus 5

visionspacetec/VST104-Sierra
VST104 single OBC board - referred as board_sierra



schmidtmt/openmotorbridge
The comprehensive technical specification is split into 18 logically organized chapters:

o7-machinehum/phantomdrive
Seemingly normal USB drive with a hidden security feature

pierre-muth/fast-flipdot
Driving a flipdot matrix differently. All dots simultaneously.

probe-rs/hs-probe
This is an open hardware probe for the Serial Wire Debug (SWD) and JTAG protocol. It utilizes an STM32F723 MCU which has an USB 2.0 High-speed Phy.
It measures 55 × 50 mm and has 4 copper layers, 1.6 mm thick.
57 parts, built around the SP3012-06UTG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mvalancy/IC_Breakouts repository on GitHub, at the commit this page was made from: the board is as7265x_color_sensors/as7265x_color_sensors.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask mvalancy before reusing the design.