
Barobord
sadekbaroudi/barobord
I have spent a lot of time and money designing prototypes, testing, developing, etc. Any contributions would be greatly appreciated!

FINAL GO BEFORE I LOSE MY MIND
ROORRR is an open-source printed circuit board by musnoo, from the musnoo/PCBOVERR repository on GitHub, published under the MIT licence. It is a 2-layer board of 224.6 × 92.9 mm with 92 parts on 78 nets, routed with 703 tracks and 27 vias.
It is built around the ATMEGA32U4-AU and PRTR5V0U2X. Its parts include 36 diodes, 7 capacitors, 6 resistors, 2 ICs and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
FINAL GO BEFORE I LOSE MY MIND
| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | SOD-123 | Diode_SMD:D_SOD-123 | D1, D2, D11, D12, D13, D14, D15, D16, D17, D18, D19, D21, D22, D23, D24, D25 +20 |
| 3 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C5, C6, C8 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R4 |
| 2 | 22 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R3 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5, R6 |
| 1 | , | MX_Alps_Hybrid:MX-1U | MX28 |
| 1 | . | MX_Alps_Hybrid:MX-1U | MX29 |
| 1 | 1 | MX_Alps_Hybrid:MX-1U | MX31 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C7 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3 |
| 1 | 2 | MX_Alps_Hybrid:MX-1U | MX32 |
| 1 | 3 | MX_Alps_Hybrid:MX-1U | MX33 |
| 1 | 4 | MX_Alps_Hybrid:MX-1U | MX34 |
| 1 | 5 | MX_Alps_Hybrid:MX-1U | MX35 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | 6 | MX_Alps_Hybrid:MX-1U | MX36 |
| 1 | 7 | MX_Alps_Hybrid:MX-1U | MX37 |
| 1 | 8 | MX_Alps_Hybrid:MX-1U | MX38 |
| 1 | 9 | MX_Alps_Hybrid:MX-1U | MX39 |
| 1 | A | MX_Alps_Hybrid:MX-1U | MX11 |
| 1 | ATmega32U4-AU | Package_QFP:TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | AVR-ISP-6 | random-keyboard-parts:Reset_Pretty-Mask | J1 |
| 1 | B | MX_Alps_Hybrid:MX-1U | MX25 |
| 1 | C | MX_Alps_Hybrid:MX-1U | MX23 |
| 1 | D | MX_Alps_Hybrid:MX-1U | MX13 |
| 1 | E | MX_Alps_Hybrid:MX-1U | MX3 |
| 1 | F | MX_Alps_Hybrid:MX-1U | MX14 |
| 1 | G | MX_Alps_Hybrid:MX-1U | MX15 |
| 1 | H | MX_Alps_Hybrid:MX-1U | MX16 |
| 1 | HRO-TYPE-C-31-M-12 | Type-C:HRO-TYPE-C-31-M-12 | USB1 |
| 1 | I | MX_Alps_Hybrid:MX-1U | MX8 |
| 1 | J | MX_Alps_Hybrid:MX-1U | MX17 |
| 1 | K | MX_Alps_Hybrid:MX-1U | MX18 |
| 1 | L | MX_Alps_Hybrid:MX-1U | MX19 |
| 1 | M | MX_Alps_Hybrid:MX-1U | MX27 |
| 1 | N | MX_Alps_Hybrid:MX-1U | MX26 |
| 1 | O | MX_Alps_Hybrid:MX-1U | MX9 |
| 1 | PRTR5V0U2X | random-keyboard-parts:SOT143B | U2 |
| 1 | Q | MX_Alps_Hybrid:MX-1U | MX1 |
| 1 | R | MX_Alps_Hybrid:MX-1U | MX4 |
| 1 | S | MX_Alps_Hybrid:MX-1U | MX12 |
| 1 | SW_Push | random-keyboard-parts:SKQG-1155865 | SW1 |
| 1 | T | MX_Alps_Hybrid:MX-1U | MX5 |
| 1 | U | MX_Alps_Hybrid:MX-1U | MX7 |
| 1 | V | MX_Alps_Hybrid:MX-1U | MX24 |
| 1 | W | MX_Alps_Hybrid:MX-1U | MX2 |
| 1 | X | MX_Alps_Hybrid:MX-1U | MX22 |
| 1 | Y | MX_Alps_Hybrid:MX-1U | MX6 |
| 1 | Z | MX_Alps_Hybrid:MX-1U | MX21 |

sadekbaroudi/barobord
I have spent a lot of time and money designing prototypes, testing, developing, etc. Any contributions would be greatly appreciated!


markstory/ursa-minor-keyboard
Design and schematics for the ursaminor keyboard



makenova/reverie
a mini 1800 keyboard based on the Elongate, Clarabelle, and Garbage Truck Keyboards

makenova/micro_redox
A family of boards inspired by the microdox and ferris

It measures 224.6 × 92.9 mm and has 2 copper layers, 1.6 mm thick.
92 parts, built around the ATMEGA32U4-AU and PRTR5V0U2X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the musnoo/PCBOVERR repository on GitHub, at the commit this page was made from: the board is ROORRR/ROORRR.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).