2 layers100 × 54 mm
2 layers100 × 54 mm
Arduino Shield PoE Wifi
muhardianab/ArduinoMega2560Making a new Arduino Mega 2560 Board
- Size
- 100 × 54 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 86
- Nets
- 147
- Pads
- 330
- Tracks, vias
- 573, 81
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 9 Jun 2024
- Updated
- 16 Jul 2026
Overview
Arduino Shield PoE Wifi is an open-source printed circuit board by muhardianab, from the muhardianab/ArduinoMega2560 repository on GitHub. It is a 2-layer board of 100 × 54 mm with 86 parts on 147 nets, routed with 573 tracks and 81 vias.
It is built around the ESP-12E, W5500 and MPZ1608S101ATAH0, with the AMS1117-3.3, AP2112K-3.3TRG1 and LM7805MP among its other parts. Its parts include 28 capacitors, 10 resistors, 4 connectors, 2 ICs and 2 inductors. It belongs with the radio and wireless and microcontroller boards boards and the ESP8266 boards of this library.
Main components
6
ESP-12E
SMD,24x16mm-20℃~+70℃ -90dBm 16dBm 170mA 2.4GHz 3V~3.6V 56mA 802.11b/g/n ESP8266 Chip On-board PCB Antenna Over-the-air (OTA) update UART、SPI、I2C SMD,24x16mm WiFi Modules ROHSAi-ThinkerWiFi Modules
W5500
LQFP-48_7x7-40℃~+85℃ 10BASE-T、100BASE-TX 3.3V 32KB SPI SPI Wake-up function、Programmable LED indication、Low-power mode Yes LQFP-48(7x7) Ethernet Controllers ROHSWIZNETEthernet Controllers
MPZ1608S101ATAH0
0603-55℃~+125℃ 1 100Ω@100MHz 30mΩ 3A ±25% 0603 Ferrite Beads ROHSTDKFerrite Beads
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
AP2112K-3.3TRG1
SOT-25-5-40℃~+85℃@(Ta) 1 250mV@(600mA) 3.3V 50uVrms 55uA 600mA 65dB@(1kHz) 6V Fixed Over Current Protection、Thermal Shutdown、Enable control Positive SOT-25-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
LM7805MP
SOT-223-40℃~+125℃@(Ta) 1 1.5A 25V 2V@(1A) 40uV 5V 62dB@(120Hz) 8mA Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive SOT-223-4 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdArduinoMega2560
Making a new Arduino Mega 2560 Board
Parts
86| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 10K_0603 | PCM_Resistor_SMD_AKL:R_0603_1608Metric | RN21, RN22, RN23, RN24, RN31, RN32, RN33, RN34, RN41, RN42, RN44, RW1, RW2 |
| 8 | 0.1uF_0603_16V | PCM_4ms_Capacitor:C_0603 | C21, C24, C25, C28, C29, C30, C32, C36 |
| 6 | 100nF_0603_16V | PCM_4ms_Capacitor:C_0603 | C1, C2, C3, C4, C5, C6 |
| 6 | PINHD_1x8_Female | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | ADC1, ADC2, COM1, PWM1, PWM2, PWR1 |
| 5 | 10uF_25V | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C20, C31, Cp1, Cp2, Cp3 |
| 5 | 1K_0603 | PCM_Resistor_SMD_AKL:R_0603_1608Metric | R_DUP1, R_SPD1, RON1, RON2, RON3 |
| 4 | 33R_0603 | PCM_Resistor_SMD_AKL:R_0603_1608Metric | RN11, RN12, RN13, RN14 |
| 4 | 49R9_0603 | PCM_Resistor_SMD_AKL:R_0603_1608Metric | R4, R5, R6, R7 |
| 3 | LED_0805_Green | PCM_LED_SMD_AKL:LED_0805_2012Metric | ON1, ON2, ON3 |
| 2 | 10nF_0603_16V | PCM_4ms_Capacitor:C_0603 | C7, C19 |
| 2 | 18pF_0603_16V | PCM_4ms_Capacitor:C_0603 | C33, C34 |
| 2 | 330R_0603 | PCM_Resistor_SMD_AKL:R_0603_1608Metric | R8, R9 |
| 2 | 6.8nF_0603_16V | PCM_4ms_Capacitor:C_0603 | C17, C18 |
| 2 | Conn_02x08 | Connector_PinSocket_2.54mm:PinSocket_2x08_P2.54mm_Vertical | J1, J2 |
| 2 | LED_0805_RED | PCM_LED_SMD_AKL:LED_0805_2012Metric | L_DUP1, L_SPD1 |
| 2 | MPZ1608S101ATAH0 | FerriteBead_MPZ1608S101ATAH0_TDK:IND_1608_TDK | L1, L2 |
| 2 | PINHD_1x2_Female | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J3, J4 |
| 1 | 10R_0603 | PCM_Resistor_SMD_AKL:R_0603_1608Metric | R25 |
| 1 | 12.4K_0603 | PCM_Resistor_SMD_AKL:R_0603_1608Metric | R46 |
| 1 | 1M_0603 | PCM_Resistor_SMD_AKL:R_0603_1608Metric | R45 |
| 1 | 1nF 2KV 1206 | PCM_4ms_Capacitor:C_1206 | C8 |
| 1 | 22R_0603 | PCM_Resistor_SMD_AKL:R_0603_1608Metric | R24 |
| 1 | 22nF_0603_16V | PCM_4ms_Capacitor:C_0603 | C16 |
| 1 | 25MHz 18pF | Crystal_25MHz_AbraconLLC:XTAL_HC49P488W46L1150T500H350 | X2 |
| 1 | 4.7uF_0603_16V | PCM_4ms_Capacitor:C_0603 | C35 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | UP2 |
| 1 | AP2112K-3.3TRG1 | PCM_Package_TO_SOT_SMD_AKL:SOT-23-5 | UP3 |
| 1 | ESP-12E | RF_Module:ESP-12E | U2 |
| 1 | ICSP_Connector_Female | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical | ICSP1 |
| 1 | LM7805MP | PCM_Package_TO_SOT_SMD_AKL:SOT-223-3_TabPin2 | UP1 |
| 1 | Push_Button | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | RJ45_Abracon_ARJP11A-MASA-B-A-EMU2 | RJ45_RJ45_Abracon_ARJP11A-MA_Horizontal-edited:RJ45_Abracon_ARJP11A-MA_Horizontal-edited | RJ45 |
| 1 | W5500 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
More from muhardianab/ArduinoMega2560
1Similar boards
- 2 layers55.6 × 54.8 mm
Signal Generator
Jmanicom/ELAB-Signal-Generator
A square wave generator with adjustable frequency, gain, and offset control. Designed as a part of UBC's ELAB PCB design course.
72 partsCERN-OHL-S-2.0 - 2 layers
- 4 layers50 × 30 mm
Picothermal hardware
icamaster/picothermal
Thermal camera based on Flir Lepton with RP2040 and USB-C
121 parts72MIT - 4 layers100 × 100 mm
- 4 layers50 × 50 mm
Pdaltmode
AnterCreeper/pdaltmode
USB Power Delivery Alt-mode Negotiation using CH32X035
88 parts10LGPL-2.1 - 4 layers106 × 120 mm
Tang Primer 20k HD6309 Board
blark/6809sidecar
Experimental daughter board for the Tang Primer 20k Lite
70 parts1 - 2 layers
- 6 layers186 × 160 mm
Open TWIST rev0
louisreg/Open-TWIST
An open-source and open-hardware benchtop neurostimulator offering precise, programmable, and arbitrary waveform generation for neuroscience research.
824 parts
Questions
How big is the Arduino Shield PoE Wifi PCB?
It measures 100 × 54 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Arduino Shield PoE Wifi use?
86 parts, built around the ESP-12E, W5500, MPZ1608S101ATAH0 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Arduino Shield PoE Wifi KiCad files?
From the muhardianab/ArduinoMega2560 repository on GitHub, at the commit this page was made from: the board is Arduino_Shield_PoE-Wifi/Arduino_Shield_PoE-Wifi.kicad_pcb and its schematic ArduinoMega2560/ArduinoMega2560.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Arduino Shield PoE Wifi design in my own project?
Its repository states no licence, so its author keeps all rights: ask muhardianab before reusing the design.