2 layers150 × 102 mm
2 layers150 × 102 mm
Trap pcb
mtsale/trapPCB-nov- Size
- 150 × 102 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 116
- Nets
- 84
- Pads
- 386
- Tracks, vias
- 569, 43
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 29 Oct 2020
- Updated
- 8 Nov 2020
Overview
Trap pcb is an open-source printed circuit board by mtsale, from the mtsale/trapPCB-nov repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 150 × 102 mm with 116 parts on 84 nets, routed with 569 tracks and 43 vias.
It is built around the DRV8800RTYR, DS1307ZN+ and EG1218. Its parts include 34 resistors, 26 capacitors, 18 diodes, 9 transistors and 5 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
DRV8800RTYR
QFN-16-EP(4x4)-40℃~+85℃ 2.8A Yes QFN-16-EP(4x4) Brushed DC Motor Drivers ROHSTexas InstrumentsStepper Motor Driver
DS1307ZN+
SO-8-40℃~+85℃ 1.5mA 300nA 4.5V~5.5V Backup power management and battery charging、InsideSRAM/NVRAM、Programmable clock output External I2C SO-8 Real Time Clocks ROHSMaxim Integrated (Analog Devices)Real Time Clocks
EG1218
插件-20℃~+70℃ 11.6mm 200mA 30V 4mm 7.4mm Black PC Pin Rectangular Columnar SPDT Through Hole Plugin Slide Switches ROHSE-SwitchSlide Switches
README
README.mdtrap-pcb
Parts
116| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100K | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R7, R8, R11, R12, R16, R19, R33 |
| 11 | 220uF | Capacitor_SMD:CP_Elec_8x10 | C1, C14, C15, C16, C17, C18, C19, C20, C22, C23, C24 |
| 11 | 470R | Resistor_SMD:R_0603_1608Metric | R5, R6, R9, R10, R13, R14, R17, R18, R20, R27, R34 |
| 10 | LED | LED_SMD:LED_0603_1608Metric | D2, D3, D5, D6, D7, D9, D10, D11, D16, D17 |
| 9 | Q_NMOS_GSD | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9 |
| 6 | Conn_01x03 | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | PIR_1, PIR_2, PIR_3, Servo_1, Servo_2, Servo_3 |
| 6 | D | Diode_SMD:D_SMA | D1, D4, D8, D12, D13, D18 |
| 4 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C27 |
| 4 | 10K | Resistor_SMD:R_0603_1608Metric | R24, R26, R29, R30 |
| 3 | CONN HEADER VERT 2POS 2MM | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | 6V_1, V_VAR, VCC_1 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric | C10, C11 |
| 2 | 15uH | trap-pcb:MWSA1004 | L1, L2 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C12, C13 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric | C21, C25 |
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C6, C7 |
| 2 | 47nF | Capacitor_SMD:C_0603_1608Metric | C8, C9 |
| 2 | 49K9 | Resistor_SMD:R_0603_1608Metric | R21, R22 |
| 2 | Conn_01x15 | Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_Vertical | J1, J2 |
| 2 | D_Shockley | Diode_SMD:D_SMA | D14, D15 |
| 2 | LMR16030 | Package_SO:HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.4x3.2mm_ThermalVias | U3, U4 |
| 2 | MountingHole | MountingHole:MountingHole_4.3mm_M4 | H1, H2 |
| 2 | R | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_Vertical | R31, R32 |
| 1 | 0.22uF | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 0.2R | Resistor_SMD:R_2512_6332Metric | R28 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | 32.769KHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | 56K | Resistor_SMD:R_0603_1608Metric | R25 |
| 1 | 69.8K | Resistor_SMD:R_0603_1608Metric | R23 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_1060_1x2032 | BT1 |
| 1 | Conn_01x02 | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | 12V_In_1 |
| 1 | Conn_01x05 | Connector_JST:JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | Ultrasonic_Cage1 |
| 1 | Conn_01x07 | Connector_JST:JST_PH_B7B-PH-K_1x07_P2.00mm_Vertical | Ultrasonic_Trap1 |
| 1 | DRV8800RTY | Package_DFN_QFN:Texas_S-PWQFN-N16_EP2.1x2.1mm_ThermalVias | U1 |
| 1 | DS1307ZN+ | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | EG1218 | trap-pcb:EG1218 | SW2 |
| 1 | LM317_TO-252 | Package_TO_SOT_SMD:TO-252-2 | U7 |
| 1 | Motor_DC | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | M1 |
| 1 | SW_DIP_x02 | Button_Switch_THT:Push_E-Switch_KS01Q01 | SW1 |
Questions
How big is the Trap pcb PCB?
It measures 150 × 102 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Trap pcb use?
116 parts, built around the DRV8800RTYR, DS1307ZN+ and EG1218. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Trap pcb KiCad files?
From the mtsale/trapPCB-nov repository on GitHub, at the commit this page was made from: the board is trap-pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Trap pcb design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers59.1 × 53.3 mm
- 2 layers48 × 75.3 mm
SmartPlant
aleksul/SmartPlant
SmartPlant is a simple project that will help you automate watering of your plants.
37 parts2MIT - 2 layers100 × 100 mm
- 2 layers40 × 30 mm
Temperature logger
H-S-S-11/attiny-temperature-logger
Temperature logger using a RTC, EEPROM, and Temperature sensor controled over I2C by an ATTiny
20 parts1 - 2 layers167.3 × 103 mm
Iw-8-controller
mekatrol/electronics
This repository contains the electronics, embedded firmware, support software, and reference material for a collection of home-automation and workshop projects.
212 parts - 2 layers83.2 × 67.9 mm
- 2 layers140 × 98 mm
