2 layers224.2 × 153.7 mm
2 layers72.4 × 30.5 mm
Buck Converter Huda
mthudaa/BMSxSTP_selectionThis repository used for BMS project at STP ITS selection purpose
- Size
- 72.4 × 30.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 7
- Pads
- 34
- Tracks, vias
- 56, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 13 Aug 2023
- Updated
- 13 Aug 2023
Overview
Buck Converter Huda is an open-source printed circuit board by mthudaa, from the mthudaa/BMSxSTP_selection repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 72.4 × 30.5 mm with 18 parts on 7 nets, routed with 56 tracks and 0 vias.
It is built around the BC327 and BC337. Its parts include 4 capacitors, 3 resistors, 2 diodes, 2 transistors and 2 connectors. It belongs with the power boards of this library.
Main components
2README
README.mdBMSxSTP_selection
This repository used for BMS project at STP ITS selection purpose
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_2.2mm_M2 | MountingHole:MountingHole_2.2mm_M2 | A, B, C, D |
| 1 | 100u | Capacitor_THT:CP_Radial_D10.0mm_P2.50mm | C1 |
| 1 | 2.2m | Inductor_THT:L_Axial_L7.0mm_D3.3mm_P2.54mm_Vertical_Fastron_MICC | L1 |
| 1 | 2.7k | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R3 |
| 1 | 2n | Capacitor_THT:C_Rect_L7.0mm_W4.5mm_P5.00mm | C3 |
| 1 | 4.7k | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R1 |
| 1 | 470 | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R2 |
| 1 | 47u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C4 |
| 1 | 6.8n | Capacitor_THT:C_Rect_L7.0mm_W4.5mm_P5.00mm | C2 |
| 1 | BC327 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | BC337 | Package_TO_SOT_THT:TO-92_Inline | Q2 |
| 1 | D_Schottky | Diode_THT:D_A-405_P7.62mm_Horizontal | D2 |
| 1 | D_Zener | Diode_THT:D_5W_P10.16mm_Horizontal | D1 |
| 1 | Input | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal | J1 |
| 1 | output | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal | J2 |
Questions
How big is the Buck Converter Huda PCB?
It measures 72.4 × 30.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Buck Converter Huda use?
18 parts, built around the BC327 and BC337. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Buck Converter Huda KiCad files?
From the mthudaa/BMSxSTP_selection repository on GitHub, at the commit this page was made from: the board is Buck_Converter/Buck_Converter_Huda/Buck_Converter_Huda.kicad_pcb and its schematic Buck_Converter/Buck_Converter_Huda/Buck_Converter_Huda.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Buck Converter Huda design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers213.6 × 127.5 mm
- 2 layers120.1 × 120 mm
Mono amplifier
dario0603/AB-class-amplifier
Design and simulation of a Class-AB audio power amplifier, focusing on output-stage linearity, crossover distortion reduction, and overcurrent protection.
97 parts1 - 2 layers50.5 × 42 mm
Audio amplifier
DesignGraveyard/V007_LTspice_26_in_5_steps
In this step-by-step tutorial, you will learn how to simulate electronic circuits in LTspice using a USB-powered audio amplifier as a practical example.
39 parts - 2 layers160 × 95 mm
Placa Control Fuentes y Carga
edgranzella/Placa-de-Corte-TX
Circuito Impreso de la plaquetita de Corte TX que va apilada sobre el Arduino Nano de la placa Controladora de Fuentes y Carga.
142 parts - 2 layers117.1 × 84.6 mm
- 2 layers
- 2 layers74.2 × 79 mm
Kitchen timer
krystofh/kitchen_timer
TimeUp kitchen timer based on 4-digit segment display, Raspberry Pi Pico and running on Zephyr RTOS
39 partsApache-2.0