6 layers64.8 × 69.9 mm
2 layers50 × 70 mm
Superenv
MTalon63/superenv-sensor- Size
- 50 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 34
- Pads
- 168
- Tracks, vias
- 283, 147
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 9 Mar 2025
- Updated
- 16 Apr 2025
Overview
Superenv is an open-source printed circuit board by MTalon63, from the MTalon63/superenv-sensor repository on GitHub. It is a 2-layer board of 50 × 70 mm with 37 parts on 34 nets, routed with 283 tracks and 147 vias.
It is built around the ESP32-C6-WROOM-1-N8, DS18B20 and AMS1117-3.3, with the TS-1187A-B-A-B and TYPE-C-31-M-04 among its other parts. Its parts include 14 connectors, 9 resistors, 7 capacitors and 4 ICs. It belongs with the ESP32 and RISC-V boards of this library.
Main components
5
ESP32-C6-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -99.2dBm 2.4GHz 20.5dBm 382mA 3V~3.6V 78mA ESP32-C6 On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
DS18B20
TO-92-55℃~+125℃ 12bit 3V~5.5V 750ms Single-bus ±0.4℃ TO-92 Temperature Sensors ROHSUMWTemperature Sensors
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
TS-1187A-B-A-B
SMD-4P,5.1x5.1mm-30℃~+85℃ 1.5mm 1.6N 100,000 cycles 12V 5.1mm 5.1mm 50mA Gold No Round Button SPST Surface Mount,Vertical Without Bracket SMD-4P,5.1x5.1mm Tactile Switches ROHSXKB ConnectionTactile Switches
TYPE-C-31-M-04
SMD-30℃~+85℃ 1 10,000 cycles 100V 24P 5A 9.87mm Black Female Surface Mount, Right Angle Type-C SMD USB Connectors ROHSHRO ElectronicsUSB Connectors
README
README.mdsuperenv-sensor
Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R4, R8, R9 |
| 3 | 4.7k | Resistor_SMD:R_0603_1608Metric | R5, R6, R7 |
| 3 | 47u | Capacitor_SMD:C_0805_2012Metric | C2, C5, C6 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | DS18B20 | Package_TO_SOT_THT:TO-92_Inline | U3, U4 |
| 2 | I2C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4, J5 |
| 2 | TS-1187A-B-A-B | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW_BOOT1, SW_RST1 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 3V3 rail | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J13 |
| 1 | 4.7n | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | AHT20+BMP280BB | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | DS18B20 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J11 |
| 1 | ESP32-C6-WROOM-1 | PCM_Espressif:ESP32-C6-WROOM-1 | U1 |
| 1 | GND rail | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J14 |
| 1 | GPIO | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J12 |
| 1 | LOGO | LOGO | G*** |
| 1 | PMSBB | Connector_JST:JST_GH_BM08B-GHS-TBT_1x08-1MP_P1.25mm_Vertical | J10 |
| 1 | Power-Header | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | SCD41BB | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | SGP41BB | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | TYPE-C-31-M-04 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | UART0 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | UART1 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J9 |
Questions
How big is the Superenv PCB?
It measures 50 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Superenv use?
37 parts, built around the ESP32-C6-WROOM-1-N8, DS18B20, AMS1117-3.3 and TS-1187A-B-A-B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Superenv KiCad files?
From the MTalon63/superenv-sensor repository on GitHub, at the commit this page was made from: the board is pcb/superenv/superenv.kicad_pcb and its schematic pcb/superenv/superenv.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Superenv design in my own project?
Its repository states no licence, so its author keeps all rights: ask MTalon63 before reusing the design.
Similar boards
- 8 layers114.6 × 94.2 mm
- 2 layers191 × 125.5 mm
Xcku5p board
sjbar03/XCKU5P-Development-Notes
Notes while learning how to develop with the Xilinx Ultrascale+ XCKU5P FPGA. Also notes on PCB design.
96 parts3 - 4 layers50.9 × 46.7 mm
HybridPanda
kriptomad/openpilot-honda-city-brasil
openpilot/flowpilot for the Honda City G7 2023 (Brazil): black panda firmware, openpilot v0.9.9 port, flowpilot APK, Hybrid Panda STM32H725 PCB. Release index repo.
125 parts1 - 6 layers92.6 × 69.4 mm
Usb hub 2
yedidia-sisay/usb3-multiport-hub
An open-source USB 3.2 Gen 2 (10 Gbps) multiport hub & docking station.
230 parts - 2 layers83.8 × 61 mm
- 2 layers69.4 × 113 mm
- 2 layers99.9 × 40 mm
