
TRS-80-Model I G E1
RetroStack/TRS-80-Model-I-G-E1
Hardware Replica of the TRS-80 Model I Revision G

MSX compatible I/O Port Based Floppy Disk Controller interface.
Microsol CDX2 is an open-source printed circuit board by msx-solis, from the msx-solis/msx-fdc-cdx2-clone repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 101.6 × 65.3 mm with 46 parts on 110 nets, routed with 1,367 tracks and 173 vias.
It is built around the 74LS00SC, 74LS174DC and 74LS74PC, with the BC547 among its other parts. Its parts include 13 capacitors, 8 resistors, 8 ICs, 6 connectors and 1 diode.
MSX compatible I/O Port Based Floppy Disk Controller interface.

Please, continue reading at the following link for building instructions:
https://github.com/msx-solis/msx-fdc-cdx2-clone/blob/main/cdx-2-iface2.4/doc/README.md
Special thanks to Paulo Maluf, XaviRompe, Andortizg and konkotgit.
Similar project and additional info at:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100nF | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C3, C4, C5, C6, C10, C11, C12, C13 |
| 3 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R5, RX1 |
| 2 | 470R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 2 | 74LS06N | MSXmakers:DIP-14c_W7.62mm_LongPads | U7, U8 |
| 1 | 10pF | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C8 |
| 1 | 12K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11 |
| 1 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | 1nF | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C2 |
| 1 | 220nF | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C7 |
| 1 | 27C256 o 27C128 | MSXmakers:DIP-28c_W15.24mm_Socket_LongPads | U1 |
| 1 | 33pF | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C9 |
| 1 | 39K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10 |
| 1 | 470R | Resistor_THT:R_Array_SIP6 | RN1 |
| 1 | 47pF | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | CX1 |
| 1 | 47uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | 4K7 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | 4MHz | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | 74LS00 | MSXmakers:DIP-14c_W7.62mm_LongPads | U2 |
| 1 | 74LS138 | MSXmakers:DIP-16c_W7.62mm_Socket_LongPads | U3 |
| 1 | 74LS174 | MSXmakers:DIP-16c_W7.62mm_Socket_LongPads | U5 |
| 1 | 74LS74 | MSXmakers:DIP-14c_W7.62mm_LongPads | U4 |
| 1 | BC547 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | DS0-sel | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | 1 |
| 1 | DS1-sel | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | 2 |
| 1 | DS2-sel | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | 3 |
| 1 | Floppy conn | Connector_PinHeader_2.54mm:PinHeader_2x17_P2.54mm_Horizontal | J1 |
| 1 | MOTOR-sel | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | 4 |
| 1 | MSX_SLOT_CON | MSXMakers:CARTRIDGE_#_MSX_XL | J2 |
| 1 | ROM_SW | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP5 |
| 1 | Test | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | TestPoint1 | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J4 |
| 1 | TestPoint2 | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J5 |
| 1 | TestPoint3 | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J6 |
| 1 | Val** | MSXmakers:Logo_MSXmakers_fsilk_29x14_neg | G*** |
| 1 | WD2793 | MSXmakers:DIP-40c_W15.24mm_LongPads | U6 |

RetroStack/TRS-80-Model-I-G-E1
Hardware Replica of the TRS-80 Model I Revision G

hkzlab/CGA_Redux
The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics






It measures 101.6 × 65.3 mm and has 2 copper layers, 1.6 mm thick.
46 parts, built around the 74LS00SC, 74LS174DC, 74LS74PC and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the msx-solis/msx-fdc-cdx2-clone repository on GitHub, at the commit this page was made from: the board is cdx-2-iface2.4/kicad/microsol-CDX2.kicad_pcb and its schematic cdx-2-iface2.4/kicad/microsol-CDX2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).