2 layers219.2 × 20.9 mm
Backplane
mschuldt/control_bricks
A collection of composable PCBs for building simple automation solutions.
27 parts2
2 layers33.5 × 53.6 mm
A collection of composable PCBs for building simple automation solutions.
- Size
- 33.5 × 53.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 26
- Pads
- 58
- Tracks, vias
- 73, 8
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 2 Nov 2018
- Updated
- 17 Dec 2018
Overview
Relay is an open-source printed circuit board by mschuldt, from the mschuldt/control_bricks repository on GitHub. It is a 2-layer board of 33.5 × 53.6 mm with 16 parts on 26 nets, routed with 73 tracks and 8 vias.
It is built around the PN2222A. Its parts include 3 resistors, 3 connectors, 2 diodes, 2 switches and 1 transistor. It belongs with the home automation and IoT boards of this library.
Main components
1Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 1N4004 | Diode_THT:D_A-405_P7.62mm_Horizontal | D1 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 2.2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | BUS | Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_Vertical | J4 |
| 1 | G5LE-1 | Relay_THT:Relay_SPDT_Omron-G5LE-1 | K1 |
| 1 | LED | LED_THT:LED_D5.0mm | D2 |
| 1 | MountingHole_Pad | MountingHole:MountingHole_3.5mm | H5 |
| 1 | PN2222A | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | SW_DIP_x08 | Package_DIP:DIP-16_W7.62mm_SMDSocket_SmallPads | SW1 |
| 1 | output terminal | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_Horizontal | J3 |
| 1 | power input | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
Questions
How big is the Relay PCB?
It measures 33.5 × 53.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Relay use?
16 parts, built around the PN2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Relay KiCad files?
From the mschuldt/control_bricks repository on GitHub, at the commit this page was made from: the board is hw/relay/relay.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Relay design in my own project?
Its repository states no licence, so its author keeps all rights: ask mschuldt before reusing the design.
More from mschuldt/control_bricks
4- 2 layers34.3 × 77.5 mm
While
mschuldt/control_bricks
A collection of composable PCBs for building simple automation solutions.
27 parts2 - 2 layers34.3 × 77.5 mm
Count
mschuldt/control_bricks
A collection of composable PCBs for building simple automation solutions.
25 parts2 - 2 layers33.5 × 53.6 mm
Perf sensor
mschuldt/control_bricks
A collection of composable PCBs for building simple automation solutions.
15 parts2
Similar boards
- 2 layers152.4 × 101.6 mm
8088-FE2010A SBC
skiselev/micro_8088
Micro 8088 - IBM XT Compatible Processor Board based on Faraday FE2010 chipset
72 parts412GPL-3.0 - 2 layers33.7 × 66 mm
Smartbell
Staacks/there.oughta.be
Projects featured on my blog at https://there.oughta.be
27 parts108GPL-3.0 - 4 layers100 × 100 mm
- 2 layers30.7 × 76.1 mm
Repeater v2
plusvic/simplebus2-intercom
General description of the Simplebus2 protocol used by some Comelit's intercoms. Hardware for retransmitting Simplebus2 messages over UART.
17 parts95CC0-1.0 - 2 layers28.8 × 43.8 mm
- 2 layers23.2 × 52.1 mm
- 4 layers184.2 × 169.5 mm
- 2 layers49.5 × 30 mm
