2 layers34.3 × 77.5 mm
While
mschuldt/control_bricks
A collection of composable PCBs for building simple automation solutions.
27 parts2
2 layers219.2 × 20.9 mm
Backplane
mschuldt/control_bricks2A collection of composable PCBs for building simple automation solutions.
- Size
- 219.2 × 20.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 33
- Pads
- 184
- Tracks, vias
- 602, 4
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 2 Nov 2018
- Updated
- 17 Dec 2018
Overview
Backplane is an open-source printed circuit board by mschuldt, from the mschuldt/control_bricks repository on GitHub. It is a 2-layer board of 219.2 × 20.9 mm with 27 parts on 33 nets, routed with 602 tracks and 4 vias.
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4, H5, H6, H7, H8, H9, H10, H11, H12, H13, H14 |
| 1 | Screw_Terminal_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J13 |
| 1 | conn1 | Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_Vertical | J5 |
| 1 | conn2 | Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_Vertical | J3 |
| 1 | conn3 | Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_Vertical | J4 |
| 1 | conn4 | Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_Vertical | J7 |
| 1 | conn5 | Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_Vertical | J10 |
| 1 | conn6 | Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_Vertical | J11 |
| 1 | out1 | Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_Vertical | J1 |
| 1 | out2 | Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_Vertical | J2 |
| 1 | out3 | Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_Vertical | J6 |
| 1 | out4 | Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_Vertical | J8 |
| 1 | out5 | Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_Vertical | J9 |
| 1 | out6 | Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_Vertical | J12 |
Questions
How big is the Backplane PCB?
It measures 219.2 × 20.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Backplane use?
27 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Backplane KiCad files?
From the mschuldt/control_bricks repository on GitHub, at the commit this page was made from: the board is hw/backplane/backplane.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Backplane design in my own project?
Its repository states no licence, so its author keeps all rights: ask mschuldt before reusing the design.
More from mschuldt/control_bricks
4- 2 layers34.3 × 77.5 mm
Count
mschuldt/control_bricks
A collection of composable PCBs for building simple automation solutions.
25 parts2 - 2 layers33.5 × 53.6 mm
Relay
mschuldt/control_bricks
A collection of composable PCBs for building simple automation solutions.
16 parts2 - 2 layers33.5 × 53.6 mm
Perf sensor
mschuldt/control_bricks
A collection of composable PCBs for building simple automation solutions.
15 parts2
Similar boards
- 2 layers47.6 × 27.3 mm
- 2 layers77.4 × 77.4 mm
CORAZON LEDS CON FADE
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
27 parts915 - 2 layers44.2 × 29.3 mm
- 2 layers40 × 40 mm
- 2 layers22 × 42 mm
Nvme bm to e
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
27 parts253GPL-3.0 - 2 layers80 × 61 mm
PicoProducer
pjgpetecodes/pico-streamdeck
This project is an OBS Controller using a Raspberry Pi Pico and CircuitPython.
27 parts230MIT - 2 layers186 × 45 mm
AddOnD
freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth
27 parts226CC-BY-SA-4.0 - 2 layers29.6 × 40.6 mm
Dbwifi revB
ugcs/ddc
Drone Show Software is software designed for drone shows, allowing flight path planning as well as control of dozens of drones simultaneously in a synchronized manner.
27 parts223