

CamperDisplay
- Size
- 56 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 119
- Nets
- 94
- Pads
- 478
- Tracks, vias
- 338, 4
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 13 Mar 2018
- Updated
- 6 Mar 2021
Overview
CamperDisplay is an open-source printed circuit board by mrwillem, from the mrwillem/PCBs repository on GitHub. It is a 2-layer board of 56 × 100 mm with 119 parts on 94 nets, routed with 338 tracks and 4 vias.
It is built around the STM32L433CCT6, TCAN330D and LPS25HB, with the MCP9808-E/MS, NTMFS5C646NL and 2450BM14G0011T among its other parts. Its parts include 51 capacitors, 32 resistors, 16 ICs, 7 connectors and 5 diodes. It belongs with the STM32 boards of this library.
Main components
9STM32L433CCT6
LQFP-48(7x7)-40℃~+85℃ 1.71V~3.6V 12bit 12bit 256KB 32 Bit 38 64KB 80MHz ARM Cortex-M4 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)TCAN330D
SOIC-8-40℃~+125℃ 1Mbps 20uA 3V~3.6V 60mA CAN Transceiver SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN TransceiversLPS25HB
HLGA-10(2.5x2.5)-30℃~+105℃ 0.1hpa 0.2hpa 1.7V~3.6V 26Kpa~1.26bar I2C、SPI No HLGA-10(2.5x2.5) Pressure Sensors ROHSSTMicroelectronicsPressure SensorsMCP9808-E/MS
MSOP-8-40℃~+125℃ 13bit 2.7V~5.5V 250ms I2C、SMBus ±0.5℃ MSOP-8 Temperature Sensors ROHSMicrochip TechnologyTemperature SensorsNTMFS5C646NL
DFN-5(5.9x4.9)-55℃~+175℃ 1 N-channel 2.164nF 2V 33.7nC@10V 6.3mΩ@4.5V 60V 900pF 93A N-Channel DFN-5(5.9x4.9) MOSFETs ROHSonsemiMOSFETs2450BM14G0011T
SMD-6P,1.6x0.8mm-40℃~+105℃ 0.6mm 0.8mm 1.5dB 1.6mm 180°@±10° 2.4GHz~2.5GHz 2dB 9.5dB SMD-6P,1.6x0.8mm Balun ROHSJohanson DielectricsBalunDS3231S#
RTC, I²C, ±3.5ppm, SOIC16Maxim Integrated (Analog Devices)UncategorisedBAS70-04-G3-08
SOT-23-31 Pair Series Connection 1V@15mA 200mA 20nA@50V 600mA 70V SOT-23-3 Schottky Diodes ROHSVishay IntertechnologySchottky DiodesBAS70-G
SOT-231 Independent 100mA 100nA@50V 1V@15mA 70V 70mA SOT-23 Schottky Diodes ROHSComchipSchottky Diodes
README
README.mdPCBs
Parts
119| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 100nF | Capacitors_SMD:C_0805 | C10, C12, C14, C15, C16, C20, C22, C23, C24, C25, C26, C27, C30, C31, C32, C36 +3 |
| 8 | 0R0 | Resistors_SMD_Addons:R_0805_HandSolder | R6, R9, R10, R11, R12, R30, R31, R32 |
| 7 | 100nF | Capacitors_SMD:C_0603 | C80, C81, C82, C83, C85, C87, C89 |
| 3 | 0R0 | Resistors_SMD:R_1206 | R1, R2, R7 |
| 3 | 10R | Resistors_SMD_Addons:R_0805_HandSolder | R16, R17, R19 |
| 3 | 4.7uF GRM31CR71H47 | Capacitors_SMD:C_1206 | C5, C6, C7 |
| 2 | 100K | Resistors_SMD_Addons:R_0805_HandSolder | R18, R25 |
| 2 | 10K | Resistors_SMD_Addons:R_0805_HandSolder | R8, R13 |
| 2 | 10nF | Capacitors_SMD:C_0805 | C21, C50 |
| 2 | 12pF | Capacitors_SMD:C_0603 | C98, C99 |
| 2 | 1K | Resistors_SMD_Addons:R_0805_HandSolder | R14, R15 |
| 2 | 22pF | Capacitors_SMD:C_0805 | C17, C18 |
| 2 | 2K | Resistors_SMD_Addons:R_0805_HandSolder | R3, R4 |
| 2 | 4,7uF | Capacitors_SMD:C_1206 | C4, C13 |
| 2 | 47K | Resistors_SMD_Addons:R_0603_HandSolder | R21, R24 |
| 2 | BAS70-04-G | TO_SOT_Packages_SMD:SOT-23 | D4, D5 |
| 2 | CONN_5X2 | pin_header_1:Pin_Header_Straight_2x05_Pitch1.27mm | P4, P6 |
| 2 | NTMFS5C646NL | Housings_SOIC_Addons:PowerPack1212-8S_Pitch0.65mm | U1, U9 |
| 2 | USB-CMC-Wuerth | SMD-CMC-Wuerth:CMC-SMD-Wuerth | U6, U13 |
| 1 | 100 mR ERJ-3RQFR10V | Resistors_SMD:R_0805 | R5 |
| 1 | 100nHNLCV32-PFR1 | Choke_SMD_Addons:Choke_SMD_3225_Standard | L10 |
| 1 | 100pF 60V | Capacitors_SMD:C_0805 | C1 |
| 1 | 10uF | Capacitors_SMD:C_1206 | C51 |
| 1 | 10uF 6,3v 7r | Capacitors_SMD:C_0603 | C86 |
| 1 | 10uF 6.3V X7r | Capacitors_SMD:C_0603 | C84 |
| 1 | 1K5 | Resistors_SMD_Addons:R_0603_HandSolder | R23 |
| 1 | 1uF | Capacitors_SMD:C_0805 | C34 |
| 1 | 1uF 0805ZC105KAT2A | Capacitors_SMD:C_0805 | C19 |
| 1 | 1uF 16V 0805 X7R | Capacitors_SMD:C_0603 | C88 |
| 1 | 1uF GRM219R71E105KA88D | Capacitors_SMD:C_0805 | C29 |
| 1 | 1uH MLP2016V1R0MT | Choke_SMD_Addons:Choke_SMD_2016_Standard | L2 |
| 1 | 2,2uF | Capacitors_SMD:C_1206 | C11 |
| 1 | 2,2uF | Capacitors_SMD:C_0805 | C3 |
| 1 | 20k | Resistors_SMD_Addons:R_0805_HandSolder | R22 |
| 1 | 22uF | Capacitors_SMD:C_1210 | C28 |
| 1 | 2450BM14G0011 | Balun_Networks_Addon:2450BM14G0011 | U14 |
| 1 | 29K | Resistors_SMD_Addons:R_0805_HandSolder | R20 |
| 1 | 2K2 | Resistors_SMD_Addons:R_0805_HandSolder | R27 |
| 1 | 2nF | Capacitors_SMD:C_0805 | C2 |
| 1 | 300k | Resistors_SMD_Addons:R_0805_HandSolder | R26 |
| 1 | 4.7 uH | Choke_SMD_Addons:Choke_SMD_4.3x4.3_H3 | WE744031004 |
| 1 | 470nF | Capacitors_SMD:C_0805 | C33 |
| 1 | 8MHz | Crystals_Addons:Crystal_SMD_EuroQuartz_MT-4pin_3.2x2.5mm_hand | U2 |
| 1 | Antenna_Shield | Balun_Networks_Addon:Molex_2.4GhZ_Chip_Antenna_146175 | AE1 |
| 1 | BAS70-G | TO_SOT_Packages_SMD:SOT-23 | D3 |
| 1 | Battery | Battery_Addons:BatterieHolderCR1025_SMD | BT1 |
| 1 | C | Capacitors_SMD:C_0402 | C90 |
| 1 | CC2640_32PIN | Housings_DFN_QFN_Addons:QFN-32-1EP_5x5mm_Pitch0.5mm_HandSolder | U12 |
| 1 | CONN_01X03 | TO_SOT_Packages_SMD:SOT-23 | P3 |
| 1 | CONN_01X14 | Display_Addons:2.4inchQVGASPIwithTouch | P2 |
| 1 | CONN_5X2 | Connect_Addons:weidmueller_8 | P8 |
| 1 | DS3231 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U8 |
| 1 | D_TVS | Diodes_SMD:D_SMB_Standard | D1 |
| 1 | INDUCTOR | Capacitors_SMD:C_0805_HandSoldering | L3 |
| 1 | Jumper_NC_Small | NetTie02_smd:NetTie-I_Connected_SMD | JP1 |
| 1 | LM53601-Q1 | Housings_VSON:VSON10_Thermal_Pad | U3 |
| 1 | LPS25HB | Housings_HLGA_Addons:HLGA-10_2x2mm_Pitch0.5mm | U10 |
| 1 | LTC4366-2 | Housings_SC:SOT23-8 | U4 |
| 1 | MCP9808 | Housings_SSOP:MSOP-8_3x3mm_Pitch0.65mm | U17 |
| 1 | R | Resistors_SMD_Addons:R_0805_HandSolder | R28 |
| 1 | R | Resistors_SMD_Addons:R_0402_HandSoldering | R29 |
| 1 | RJHSE-5380-02 | Connect_Addons:RJHSE538X-02-noled | J1 |
| 1 | S25FL127S | Housings_SOIC:SOIJ-8_5.3x5.3mm_Pitch1.27mm | U5 |
| 1 | STM32L433CC | Housings_QFP:LQFP-48_7x7mm_Pitch0.5mm | U15 |
| 1 | TCAN330 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U11 |
| 1 | TSX-3225 24.0000MF20G-AC3 | Crystals_Addons:Crystal_SMD_EuroQuartz_MT-4pin_3.2x2.5mm_hand | Y1 |
| 1 | TVS-ARRAY-SOT5 | TO_SOT_Packages_SMD:SOT-23-5 | U7 |
| 1 | USB_B | Connect:USB_Mini-B | P1 |
| 1 | ZENER | Diodes_SMD:D_SOD-323_HandSoldering | D6 |
More from mrwillem/PCBs
12- 4 layers

- 4 layers91 × 100 mm

- 2 layers

- 6 layers100 × 95 mm

- 4 layers92 × 98 mm

- 4 layers92 × 98 mm

- 2 layers173 × 114 mm

- 4 layers79 × 80.5 mm

- 4 layers126.2 × 94 mm

- 2 layers100 × 105 mm

- 4 layers

- 4 layers100 × 59 mm

Similar boards
- 4 layers65 × 35 mm

FlexiBMS
SimosMCmuffin/FlexiBMS_hardware
Open Source BMS developed by Simo Sihvonen (Simos MCmuffin) with the Esk8 community, for the Esk8 community
209 parts14 - 4 layers34.5 × 18 mm

OpenAXES
OpenAXES-IMU/OpenAXES
Hardware design files and source code for an open-access wireless IMU
99 parts9 - 4 layers49.8 × 41.8 mm

Cc1352-swim thermo
mik4el/cc1352-swim-thermo
Software and hardware for dual band radio high accuracy swim thermometer
55 parts2Apache-2.0 - 4 layers65 × 24 mm

- 2 layers118.7 × 184.1 mm

- 2 layers99.1 × 99.1 mm

- 2 layers130 × 30 mm

Wordclock2
mad73923/wordclock2PCB_mechanics
Wall-mount clock which shows the clock in words. incl. WIFI for weather information, Twitter, E-Mails etc
60 parts1 - 4 layers52.9 × 70.7 mm

Solution design
featherfly12/speaker-pcb
In this github, there is a pcb design that has a total of 1 song! Download the KiCAD/PCB files in JLCPCB for the design schematic and files! Download the .zip files in firmware/media for the code! Once you've soldered…
56 parts
Questions
How big is the CamperDisplay PCB?
It measures 56 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CamperDisplay use?
119 parts, built around the STM32L433CCT6, TCAN330D, LPS25HB and MCP9808-E/MS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CamperDisplay KiCad files?
From the mrwillem/PCBs repository on GitHub, at the commit this page was made from: the board is CamperDisplay/CamperDisplay.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the CamperDisplay design in my own project?
Its repository states no licence, so its author keeps all rights: ask mrwillem before reusing the design.