Skip to the content
2 layers42.1 × 50.3 mm7-segment LED, the printed circuit board in 3D

なお、点灯させるためには、この他にArduino UNOが必要である。 ## プリント基板の作成 設計した基板データは本リポジトリで公開している。 例えば、JLCPCBであればこのZIPファイル 7-segmentLED02kicad\production\7-segmentLED02kicad.zipをgerber fileとしてアップロードすることで基板の発注ができる。

Size
42.1 × 50.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
26
Pads
84
Tracks, vias
196, 27
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
5 Sep 2025
Updated
10 Oct 2025

Overview

7-segment LED is an open-source printed circuit board by mrmtmtk03, from the mrmtmtk03/7-segment_LED repository on GitHub. It is a 2-layer board of 42.1 × 50.3 mm with 14 parts on 26 nets, routed with 196 tracks and 27 vias.

It is built around the SC39-11EWA. Its parts include 8 resistors and 5 ICs.

Main components

1

README

readme.md

7セグメントLED回路

回路構成

KiCadにて回路図を作成した。 7セグメントデコーダー(TC4511BP)を使用して、4つの7セグメントLEDをArduino UNOによりダイナミック点灯する回路である。 KiCadにて作成した回路図

使用部品

使用する7セグメントLEDはカソードコモンで、データシートより順方向電圧$V_F=3.5\,[\mathrm{V}]$、順方向電流の絶対最大定格は$I_F=35\,[\mathrm{mA}]$である。 今回は$I_F=4.5\,[\mathrm{mA}]$となるように抵抗1を選定し以下のようにRを330 Ωと定める。

math
R_1=\frac{V-V_F}{I_F}=\frac{5-3.5}{0.0045}≒330\,[\mathrm{Ω}]

具体的な使用部品は以下の表に示す。

部品型番秋月電子販売コード
7セグメントドライバーTC4511BP114057
7セグメントLEDOSL10391-LRA130319
抵抗器330 Ω107812
丸ピンICソケット(16P)2227MC-16-03100029
細ピンヘッダー(オスL型) 1×12PHA-1x12RG111573

なお、点灯させるためには、この他にArduino UNOが必要である。

プリント基板の作成

設計した基板データは本リポジトリで公開している。 例えば、JLCPCBであればこのZIPファイル 7-segment_LED_02_kicad\production\7-segment_LED_02_kicad.zipをgerber fileとしてアップロードすることで基板の発注ができる。

ただし、基板の発注内容に誤りがあった場合、その結果生じた発注者の不利益について、当方は責任を負いかねますので、十分ご注意ください。

Parts

14
QtyValueFootprintReferences
8RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R2, R3, R4, R5, R6, R7, R8
4SC39-11EWADisplay_7Segment:Sx39-1xxxxxU1, U2, U3, U4
1Conn_01x12_PinConnector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_VerticalGND
1TC4511BPTC4511BP:DIP762W60P254L1975H445Q16NIC1

More from mrmtmtk03/7-segment_LED

1
  • 2 layers41.9 × 47.7 mm7-segment LED 02 kicad, the printed circuit board in 3D

    7-segment LED 02 kicad

    mrmtmtk03/7-segment_LED

    なお、点灯させるためには、この他にArduino UNOが必要である。 ## プリント基板の作成 設計した基板データは本リポジトリで公開している。 例えば、JLCPCBであればこのZIPファイル 7-segmentLED02kicad\production\7-segmentLED02kicad.zipをgerber fileとしてアップロードすることで基板の発注ができる。

    15 parts

Similar boards

  • 2 layers87.6 × 79.4 mmTempcontrolfan, the printed circuit board in 3D

    Tempcontrolfan

    hemilth2257/Temperature-Controlled-DC-Fan

    Temperature Controlled DC fan built with an Arduino Nano, LM358 op-amp, and a custom KiCad PCB

    20 parts1
  • 2 layers160 × 100 mmMonitor, the printed circuit board in 3D

    Monitor

    Noah1989/loopmicro

    An 8-bit microcomputer for the 21st century

    113 parts2MIT
  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0
  • 2 layers45.3 × 42.7 mmMainPcb, the printed circuit board in 3D

    MainPcb

    adamb314/ServoProject

    Getting the most out of your hobby servo

    14 parts545

Questions

How big is the 7-segment LED PCB?

It measures 42.1 × 50.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the 7-segment LED use?

14 parts, built around the SC39-11EWA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the 7-segment LED KiCad files?

From the mrmtmtk03/7-segment_LED repository on GitHub, at the commit this page was made from: the board is 7-segment_LED_kicad/7-segment_LED.kicad_pcb and its schematic 7-segment_LED_02_kicad/7-segment_LED_02_kicad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the 7-segment LED design in my own project?

Its repository states no licence, so its author keeps all rights: ask mrmtmtk03 before reusing the design.