

KeyboardOsu
osu optimization attempt
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 68
- Nets
- 119
- Pads
- 297
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 22 Aug 2026
- Updated
- 8 Oct 2026
Overview
KeyboardOsu is an open-source printed circuit board by MrFriedOk, from the MrFriedOk/flickerflame repository on GitHub. It is a 2-layer board with 68 parts on 119 nets.
It is built around the RP2040, TLC5947RHBT and W25Q128JVSIQ, with the TPS54302, ESD9B5.0ST5G and ABM8-272-T3 among its other parts. Its parts include 27 capacitors, 17 resistors, 8 ICs, 6 diodes and 3 connectors. It belongs with the RP2040 boards of this library.
Main components
6RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)TLC5947RHBT
VQFN-32-EP(5x5)-40℃~+85℃ 2% 24 30mA 3V~5.5V 4MHz Over-Temperature Protection (OTP) PWM VQFN-32-EP(5x5) LED Drivers ROHSTexas InstrumentsLED DriversW25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHTPS54302
UncategorisedTexas InstrumentsESD9B5.0ST5G
SOD-923(0402)-55℃~+125℃ 1 10V 15pF 5V 8.4V 80W@8/20us 80nA 8A@8/20us Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 SOD-923(0402) ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)ABM8-272-T3
SMD3225-4P-40℃~+85℃ 10pF 12MHz 50Ω SMD crystal oscillator ±30ppm ±30ppm SMD3225-4P Crystals ROHSAbraconCrystals
README
README.mdParts
68| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C7, C8, C9, C23, C25 |
| 4 | 1uF | Capacitor_SMD:C_0402_1005Metric | C13, C14, C26, C27 |
| 4 | 5.1k | Resistor_SMD:R_0402_1005Metric | R2, R5, R16, R17 |
| 4 | ESD9B5.0ST5G | Diode_SMD:D_SOD-923 | D7, D8, D9, D10 |
| 4 | ~ | Package_TO_SOT_SMD:SOT-23-3 | U5, U6, U7, U8 |
| 3 | 1k | Resistor_SMD:R_0402_1005Metric | R11, R12, R13 |
| 3 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C10, C11, C12 |
| 3 | 27 | Resistor_SMD:R_0402_1005Metric | R3, R4, R14 |
| 2 | .1uF | Capacitor_SMD:C_0402_1005Metric | C16, C19 |
| 2 | 15pF | Capacitor_SMD:C_0402_1005Metric | C21, C22 |
| 2 | 1M | Resistor_SMD:R_0402_1005Metric | (NF)1, (NF)2 |
| 2 | 22uF | Capacitor_SMD:C_0402_1005Metric | C17, C18 |
| 2 | SW_Push | Button_Switch_SMD:Panasonic_EVQPUJ_EVQPUA | SW1, SW3 |
| 1 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C24 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 105k | Capacitor_SMD:C_0402_1005Metric | R7 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C15 |
| 1 | 10uH | Capacitor_SMD:C_0402_1005Metric | L2 |
| 1 | 200 | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 22k | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 49.9 | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 511k | Capacitor_SMD:C_0402_1005Metric | R6 |
| 1 | 75pF | Capacitor_SMD:C_0402_1005Metric | C20 |
| 1 | ABM8-272-T3 | footprints:ABM8-272-T3_ABR | X1 |
| 1 | Conn_01x03_Pin | Connector_JST:JST_EH_S3B-EH_1x03_P2.50mm_Horizontal | J2 |
| 1 | Conn_01x08_Socket | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J3 |
| 1 | LED | LED_SMD:LED_0201_0603Metric | D6 |
| 1 | LED_ARGB | LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mm | D5 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | RotaryEncoder | Rotary_Encoder:RotaryEncoder_Alps_EC12E-Switch_Vertical_H20mm_CircularMountingHoles | SW2 |
| 1 | TLC5947RHB | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U4 |
| 1 | TPS54302 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | USB_C_Receptacle | Connector_USB:USB_C_Receptacle_Molex_105450-0101 | J4 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U2 |
More from MrFriedOk/flickerflame
3- 2 layers60 × 50 mm

- 2 layers47.6 × 76.2 mm

- 2 layers55 × 95 mm

Similar boards
- 4 layers100 × 80 mm

- 6 layers433.1 × 135.9 mm

- 4 layers64 × 24.5 mm

- 2 layers200 × 110 mm

- 2 layers156.8 × 110.7 mm

- 2 layers60 × 60 mm

- 4 layers50 × 58.9 mm

Combo lock cracker
ShaanJ1/combo-lock-breaker
A device that goes through every single combination to find the correct code for your lock
60 parts - 4 layers277.2 × 107.5 mm

Katia
ikajdan/katia
A split keyboard with 6 by 3 column staggered keys and 3 thumb keys, based on the Crkbrd design
230 parts33CERN-OHL-P-2.0
Questions
What parts does the KeyboardOsu use?
68 parts, built around the RP2040, TLC5947RHBT, W25Q128JVSIQ and TPS54302. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the KeyboardOsu KiCad files?
From the MrFriedOk/flickerflame repository on GitHub, at the commit this page was made from: the board is experience/keebored/old/keyboardOsu/keyboardOsu.kicad_pcb and its schematic experience/keebored/keebored/mRev/mRev.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the KeyboardOsu design in my own project?
Its repository states no licence, so its author keeps all rights: ask MrFriedOk before reusing the design.