

Integrated ACG separate v2
- Size
- 64 × 24.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 63
- Pads
- 176
- Tracks, vias
- 292, 46
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 5 Feb 2026
- Updated
- 11 May 2026
Overview
Integrated ACG separate v2 is an open-source printed circuit board by IvancO00, from the IvancO00/20260205_LightModule_ACG repository on GitHub. It is a 4-layer board of 64 × 24.5 mm with 33 parts on 63 nets, routed with 292 tracks and 46 vias.
It is built around the ATMEGA328PB-MUR, TJA1028TK/5V0/20/J and TLC5947RHBT. Its parts include 4 capacitors, 4 resistors, 4 inductors, 3 ICs and 3 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATMEGA328PB-MUR
VFQFN-32-EP(5x5)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 27 2KB 32KB 8 Bit AVR Built-in FLASH VFQFN-32-EP(5x5) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)TJA1028TK/5V0/20/J
HVSON-8-EP(3x3)1 1 4.5mA 45uA 5.5V~28V Transceiver ±8kV HVSON-8-EP(3x3) LIN Transceivers ROHSNXP SemiconductorsLIN TransceiversTLC5947RHBT
VQFN-32-EP(5x5)-40℃~+85℃ 2% 24 30mA 3V~5.5V 4MHz Over-Temperature Protection (OTP) PWM VQFN-32-EP(5x5) LED Drivers ROHSTexas InstrumentsLED Drivers
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | TestPoint | TestPoint:TestPoint_Pad_D2.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12 |
| 4 | RGB_LRTB | 00_RA_Library:LRTB GVSG_OSR | L1, L2, L3, L4 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R5 |
| 2 | 22 pF | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 2 | TestPoint_Keystone_5015_Micro_Mini | TestPoint:TestPoint_Keystone_5015_Micro_Mini | BTN, GND |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 1.6k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 10 uF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 84952-5 | 00_RA_Library:849525 | J3 |
| 1 | ATMEGA328PB-MUR | 00_RA_Library:QFN50P500X500X90-33N-D | IC1 |
| 1 | Conn_01x04_Pin | 00_RA_Library:MCON1.2-4 | J1 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | Y1 |
| 1 | FLASH | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical_SMD | J2 |
| 1 | TJA1028TK/5V0/20/J | 00_RA_Library:HVSON8_3X3_NXP | U2 |
| 1 | TLC5947RHB | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm_ThermalVias | U1 |
Similar boards
- 6 layers433.1 × 135.9 mm

- 2 layers200 × 110 mm

- 2 layers156.8 × 110.7 mm

- 2 layers

- 4 layers100 × 75 mm

- 4 layers113.3 × 23.5 mm

Tinyriser
a-little-wifi/Tinyriser
Cooler/cuter riser for Lenovo 8th/9th gen Tiny5 PCs
33 parts170CERN-OHL-S-2.0 - 4 layers180 × 235 mm

JLCPCB
Cimos/kicad-druid
KiCad custom design rules (.kicad_dru) matching JLCPCB and PCBWay manufacturing capabilities
33 parts49MIT - 4 layers99.4 × 34.5 mm

Questions
How big is the Integrated ACG separate v2 PCB?
It measures 64 × 24.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Integrated ACG separate v2 use?
33 parts, built around the ATMEGA328PB-MUR, TJA1028TK/5V0/20/J and TLC5947RHBT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Integrated ACG separate v2 KiCad files?
From the IvancO00/20260205_LightModule_ACG repository on GitHub, at the commit this page was made from: the board is Scheatic_Integrated_ACG_separate_v2_by_L.Battisti/Integrated_ACG_separate_v2.kicad_pcb and its schematic Scheatic_Integrated_ACG_separate_v2_by_L.Battisti/Integrated_ACG_separate_v2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Integrated ACG separate v2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask IvancO00 before reusing the design.