Skip to the content
33

TLC5947RHBT

Texas InstrumentsExtended

-40℃~+85℃ 2% 24 30mA 3V~5.5V 4MHz Over-Temperature Protection (OTP) PWM VQFN-32-EP(5x5) LED Drivers ROHS

Part id
ti/TLC5947RHBT
Category
LED Drivers
Package
VQFN-32-EP(5x5)
Pins
32
In stock
239 at JLCPCB (C181402)
Used on
5 open-source boards

Overview

The TLC5947RHBT is a LED Driver made by Texas Instruments in a VQFN-32-EP(5x5) package with 33 pins. -40℃~+85℃ 2% 24 30mA 3V~5.5V 4MHz Over-Temperature Protection (OTP) PWM VQFN-32-EP(5x5) LED Drivers ROHS.

PCBKit's library has its KiCad symbol (Driver_LED:TLC5947RHB, from KiCad's library) and its footprint (Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm, from KiCad's library), ready for a KiCad board. 239 are in stock at JLCPCB (part C181402). 5 open-source boards in 5 repositories on GitHub use it.

Symbol

1OUT02OUT13OUT24OUT35OUT46OUT57OUT68OUT79OUT810OUT911OUT1012OUT1113OUT1214OUT1315OUT1416OUT1517OUT1618OUT1719OUT1820OUT1921OUT2022OUT2123OUT2224OUT2325SOUT26XLAT27IREF28VCC29GND30BLANK31SCLK32SIN33PowerPAD
Driver_LED:TLC5947RHBFrom KiCad's library

Footprint

33
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mmFrom KiCad's library

From the datasheet

11
Supply, least
3 V · VCC, recommended operating min · p. 5
Supply, most
5.5 V · VCC, recommended operating max · p. 5
Supply, absolute maximum
6 V · VCC, absolute max · p. 4
Works from
-40 °C · Operating free-air temperature min · p. 5
Works up to
85 °C · Operating free-air temperature max · p. 5
Junction, hottest
150 °C · Operating junction temperature absolute max · p. 4
Takes working
15 mA · VCC typical, BLANK low, RIREF = 3.3 kΩ, GSn = FFFh · p. 6
Takes at most
90 mA · VCC max, BLANK low, RIREF = 1.6 kΩ, GSn = FFFh · p. 6
Takes asleep
500 µA · VCC typical, BLANK high, RIREF = 24 kΩ · p. 6
Takes asleep
1 mA · VCC typical, BLANK high, RIREF = 3.3 kΩ · p. 6
Gives
30 mA · Constant output sink current per channel max · p. 5

What it is and has

11
Output channels
24, constant-current sink · p. 1
Output current capability
30 mA per channel · p. 1
PWM grayscale
12-bit, 4096 steps · p. 1
LED power-supply voltage
Up to 30 V · p. 1
Logic I/O
CMOS logic level · p. 1
Constant-current accuracy
Channel-to-channel ±2% typical · p. 1
Constant-current accuracy
Device-to-device ±2% typical · p. 1
Auto display repeat
Supported · p. 1
Internal oscillator
4 MHz · p. 1
Protection
Thermal shutdown · p. 1
Noise reduction
4-channel grouped delay to prevent inrush current · p. 1

Around it

1
cap 0.1 µF
between VCC and GND; Ceramic; place close to the VCC pin and GND plane. · p. 20

Specifications

45
ParameterConditionsAs printedPage
Supply voltage: VCC VCCOver operating free-air temperature rangemin -0.3 · max 6 V4
Output current (dc) IOOUT0 to OUT23max 38 mA4
Input voltage VISIN, SCLK, XLAT, BLANK; maximum VCC + 0.3 Vmin -0.3 V4
Output voltage VOSOUT; maximum VCC + 0.3 Vmin -0.3 V4
Output voltage VOOUT0 to OUT23min -0.3 · max 33 V4
Operating junction temperature TJ(MAX)max 150 °C4
Storage temperature Tstgmin -55 · max 150 °C4
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins; ±2500 Vmax 2500 V4
Electrostatic discharge V(ESD)Charged device model (CDM), per JEDEC specification JESD22-C101, all pins; ±500 Vmax 500 V4
Supply voltage VCCTA = –40°C to 85°Cmin 3 · max 5.5 V5
Voltage applied to output OUT0 to OUT23 VOVCC = 3 V to 5.5 Vmax 30 V5
High-level output current SOUT IOHVCC = 3 V to 5.5 Vmax -3 mA5
Low-level output current SOUT IOLVCC = 3 V to 5.5 Vmax 3 mA5
Constant output sink current OUT0 to OUT23 IOLCVCC = 3 V to 5.5 Vmin 2 · max 30 mA5
Operating free-air temperature range TAmin -40 · max 85 °C5
Operating junction temperature TJmin -40 · max 125 °C5
Data shift clock frequency fSCLKSCLK, Standalone operation; VCC = 3 V to 5.5 Vmax 30 MHz5
Data shift clock frequency fSCLKSCLK, Duty 50%, cascade operation; VCC = 3 V to 5.5 Vmax 15 MHz5
Pulse duration TWH0SCLK = High-level pulse widthmin 12 ns5
Pulse duration TWL0SCLK = Low-level pulse widthmin 10 ns5
Pulse duration TWH1XLAT, BLANK High-level pulse widthmin 30 ns5
Setup time TSU0SIN–SCLK↑min 5 ns5
Setup time TSU1XLAT↑–SCLK↑min 100 ns5
Setup time TSU2XLAT↑–BLANK↓min 30 ns5
Hold time TH0SIN–SCLK↑min 3 ns5
Hold time TH1XLAT↑–SCLK↑min 10 ns5
OPERATING FACTOR ABOVE TA = 25°CQFN-32max 27.86 mW/°C5
POWER RATINGQFN-32; TA < 25°Cmax 3482 mW5
POWER RATINGQFN-32; TA = 70°Cmax 2228 mW5
POWER RATINGQFN-32; TA = 85°Cmax 1811 mW5
Low-level output voltage VOLIOL = 3 mA at SOUTmax 0.4 V6
Input current IINVIN = VCC or GND at SIN, XLAT, and BLANKmin -1 · max 1 uA6
Supply current (VCC) ICC1SIN/SCLK/XLAT = low, BLANK = high, VOUTn = 1 V, RIREF = 24 kΩtyp 0.5 · max 3 mA6
Supply current (VCC) ICC2SIN/SCLK/XLAT = low, BLANK = high, VOUTn = 1 V, RIREF = 3.3 kΩtyp 1 · max 6 mA6
Supply current (VCC) ICC3SIN/SCLK/XLAT = low, BLANK = low, VOUTn = 1 V, RIREF = 3.3 kΩ, GSn = FFFhtyp 15 · max 45 mA6
Supply current (VCC) ICC4SIN/SCLK/XLAT = low, BLANK = low, VOUTn = 1 V, RIREF = 1.6 kΩ, GSn = FFFhtyp 30 · max 90 mA6
Constant output current IOLCAll OUTn = ON, VOUTn = 1 V, VOUTfix = 1 V, RIREF = 1.6 kΩmin 27.7 · typ 30.75 · max 33.8 mA6
Output leakage current IOLKBLANK = high, VOUTn = 30 V, RIREF = 1.6 kΩ, At OUT0 to OUT23max 0.1 uA6
Constant-current error (channel-to-channel) ΔIOLCAll OUTn = ON, VOUTn = 1 V, VOUTfix = 1 V, RIREF = 1.6 kΩ, At OUT0 to OUT23; typical ±2%min -4 · typ 2 · max 4 %6
Constant-current error (device-to-device) ΔIOLC1All OUTn = ON, VOUTn = 1 V, VOUTfix = 1 V, RIREF = 1.6 kΩ; typical ±2%min -7 · typ 2 · max 7 %6
Line regulation ΔIOLC2All OUTn = ON, VOUTn = 1 V, VOUTfix = 1 V, RIREF = 1.6 kΩ, At OUT0 to OUT23; typical ±1, maximum ±3typ 1 · max 3 %/V6
Load regulation ΔIOLC3All OUTn = ON, VOUTn = 1 V to 3 V, VOUTfix = 1 V, RIREF = 1.6 kΩ, At OUT0 to OUT23; typical ±2, maximum ±6typ 2 · max 6 %/V6
Thermal shutdown threshold TDOWNJunction temperature; not tested, specified by designmin 150 · typ 162 · max 175 °C6
Thermal error hysteresis THYSJunction temperature; not tested, specified by designmin 5 · typ 10 · max 20 °C6
Reference voltage output VIREFRIREF = 1.6 kΩmin 1.16 · typ 1.2 · max 1.24 V6

Pins, by the datasheet

32
1 OUT0
Constant-current output; outputs may be tied together to increase current capability and may have different applied voltages. · p. 3
2 OUT1
Constant-current output. · p. 3
3 OUT2
Constant-current output. · p. 3
4 OUT3
Constant-current output. · p. 3
5 OUT4
Constant-current output. · p. 3
6 OUT5
Constant-current output. · p. 3
7 OUT6
Constant-current output. · p. 3
8 OUT7
Constant-current output. · p. 3
9 OUT8
Constant-current output. · p. 3
10 OUT9
Constant-current output. · p. 3
11 OUT10
Constant-current output. · p. 3
12 OUT11
Constant-current output. · p. 3
13 OUT12
Constant-current output. · p. 3
14 OUT13
Constant-current output. · p. 3
15 OUT14
Constant-current output. · p. 3
16 OUT15
Constant-current output. · p. 3
17 OUT16
Constant-current output. · p. 3
18 OUT17
Constant-current output. · p. 4
19 OUT18
Constant-current output. · p. 4
20 OUT19
Constant-current output. · p. 4
21 OUT20
Constant-current output. · p. 4
22 OUT21
Constant-current output. · p. 4
23 OUT22
Constant-current output. · p. 4
24 OUT23
Constant-current output. · p. 4
25 SOUT
Serial grayscale shift-register data output; MSB appears on the falling edge of SCLK. · p. 4
26 XLAT
Rising edge transfers grayscale shift-register data to the data latch and forces outputs off until the next display period without resetting the grayscale counter. · p. 4
27 IREF
Connect an external resistor to GND to set the constant sink current of OUT0 through OUT23. · p. 3
28 VCC
Power-supply voltage. · p. 4
29 GND
Power ground. · p. 3
30 BLANK
High forces all outputs off, initializes PWM timing, and resets the grayscale counter; low enables PWM control. · p. 3
31 SCLK
Schmitt-buffer serial clock input; rising edges shift SIN data and falling edges update SOUT; allow 100 ns after an XLAT rising edge. · p. 4
32 SIN
Serial input for grayscale data. · p. 4

Open-source boards using it

5
  • 6 layers433.1 × 135.9 mmMXKeyboard, the printed circuit board in 3D

    MXKeyboard

    bad-alloc-heavy-industries/MXKeyboard

    401 parts13BSD-3-Clause
  • 2 layers200 × 110 mmLTDM UI RevC, the printed circuit board in 3D

    LTDM UI RevC

    aschmidt99/LTDM_Kit_RevC

    New LTDM Code that has render.cpp

    83 parts2
  • 2 layers156.8 × 110.7 mmLed plate-96-well, the printed circuit board in 3D

    Led plate-96-well

    CallumFerguson/led-plate-96-well

    121 parts
  • 2 layersKeyboardOsu, the printed circuit board in 3D

    KeyboardOsu

    MrFriedOk/flickerflame

    osu optimization attempt

    68 parts

Questions

Is there a KiCad symbol and footprint for the TLC5947RHBT?

Yes. The symbol is Driver_LED:TLC5947RHB and the footprint Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TLC5947RHBT?

VQFN-32-EP(5x5), with 33 pins. Its footprint is drawn on this page.

Where is the TLC5947RHBT datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TLC5947RHBT?

JLCPCB lists it as part C181402, with 239 in stock; the sellers' links on this page open their listings.

Which open-source boards use the TLC5947RHBT?

5 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.