

Podal 1590b
Design for a guitar effects pedal using the Daisy and Pd
- Size
- 54 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 56
- Nets
- 65
- Pads
- 169
- Tracks, vias
- 469, 19
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Feb 2024
- Updated
- 4 Sep 2026
Overview
Podal 1590b is an open-source printed circuit board by motekulo, from the motekulo/prog1 repository on GitHub. It is a 2-layer board of 54 × 60 mm with 56 parts on 65 nets, routed with 469 tracks and 19 vias.
Its parts include 22 resistors, 12 capacitors, 9 connectors, 4 diodes and 3 switches. It belongs with the audio and music boards of this library.
README
README.mdProg1
A guitar pedal that runs patches prototyped on a Daisy Pod.
ProgPedals is the site dedicated to this pedal, patches, and community.
Thanks
- For hardware thanks to work on the Dasiy Petal, the Terrarium, Hothouse and the work of Keith Shepherd
- Timothy Schoen and other developers (Alex Mitchell, for example) for Plugdata
- Wasted Audio for the Heavy hvcc compiler
- Graham Wakefield and Gregory Taylor for Generating Sound and Organizing Time
Videos
Roadmap
- Prog2 - using the Daisy Seed2 DFM
- ~~ Footswitch PCBs connected via IDC cable ~~
- ~~ Better audio sockets ~~
- ~~ SMD version as well as through hole. ~~
About me
I'm a musician/ lecturer - https://researchers.mq.edu.au/en/persons/denis-crowdy, https://codemusic.studio
Parts
56| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 1M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3, R4, R5, R6, R7, R8, R19, R20 |
| 7 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R9, R10, R11, R12, R13, R14 |
| 5 | 1u | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C2, C7, C8, C9, C10 |
| 4 | 100n | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C3, C4, C5, C6 |
| 2 | 100K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R17, R18 |
| 2 | 100R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R15, R16 |
| 2 | 2.2nF | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C11, C12 |
| 2 | 3.3K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R21, R22 |
| 2 | LED_RAGB | LED_THT:LED_D5.0mm-4_RGB | D3, D4 |
| 1 | 100u | Capacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mm | C1 |
| 1 | 1N5819 | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D2 |
| 1 | Battery_Cell | Connector_Wire:SolderWire-0.25sqmm_1x02_P4.2mm_D0.65mm_OD1.7mm | BT1 |
| 1 | Electrosmith_Daisy_Seed_Rev4 | Module:Electrosmith_Daisy_Seed | A1 |
| 1 | Guitar in | Connector_Wire:SolderWire-0.25sqmm_1x01_D0.65mm_OD2mm | J1 |
| 1 | Knob 1 | Potentiometer_THT:Potentiometer_Alps_RK09K_Single_Vertical | RV1 |
| 1 | Knob 2 | Potentiometer_THT:Potentiometer_Alps_RK09K_Single_Vertical | RV2 |
| 1 | L78L05_TO92 | Library:TO-92_Inline_Wide_78L05_dc | U2 |
| 1 | LED | LED_THT:LED_D1.8mm_W3.3mm_H2.4mm | D1 |
| 1 | Left out | Connector_Wire:SolderWire-0.25sqmm_1x01_D0.65mm_OD2mm | J7 |
| 1 | Right out | Connector_Wire:SolderWire-0.25sqmm_1x01_D0.65mm_OD2mm | J8 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC12E-Switch_Vertical_H20mm | SW3 |
| 1 | Switch 1 | Connector_Wire:SolderWire-0.15sqmm_1x02_P4mm_D0.5mm_OD1.5mm | SW1 |
| 1 | Switch 2 | Connector_Wire:SolderWire-0.15sqmm_1x02_P4mm_D0.5mm_OD1.5mm | SW2 |
| 1 | TL074 | Package_DIP:DIP-14_W7.62mm_Socket | U1 |
| 1 | fsw pin 1 | Connector_Wire:SolderWire-0.25sqmm_1x01_D0.65mm_OD2mm | J2 |
| 1 | fsw pin 2 | Connector_Wire:SolderWire-0.25sqmm_1x01_D0.65mm_OD2mm | J3 |
| 1 | fsw pin 3 | Connector_Wire:SolderWire-0.25sqmm_1x01_D0.65mm_OD2mm | J9 |
| 1 | fsw pin 4 | Connector_Wire:SolderWire-0.25sqmm_1x01_D0.65mm_OD2mm | J4 |
| 1 | fsw pin 5 | Connector_Wire:SolderWire-0.25sqmm_1x01_D0.65mm_OD2mm | J5 |
| 1 | fsw pin 6 | Connector_Wire:SolderWire-0.25sqmm_1x01_D0.65mm_OD2mm | J6 |
More from motekulo/prog1
3- 2 layers76 × 82 mm

- 2 layers59 × 75 mm

- 2 layers34 × 58 mm

Similar boards
- 2 layers90 × 38 mm

LCD OLinuXino-5TS Rev.B
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
56 parts1.5k - 2 layers50.4 × 48.4 mm

Distortion
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
56 parts915 - 2 layers27 × 24.7 mm

- 2 layers123.9 × 94.4 mm

- 2 layers120.6 × 85.5 mm

KLOTZ
GEIGEIGEIST/KLOTZ
KLOTZ is 34 keys column-staggered split keyboard. It uses an encoder and three status LEDs on each side.
56 parts287GPL-3.0 - 2 layers136 × 91.7 mm

One
ergonautkb/one
Ergonaut One is an open-source ergonomic wireless split mechanical keyboard designed by Ergonaut Keyboards.
56 parts210CERN-OHL-P-2.0 - 2 layers78.5 × 69 mm

Kicad cpu board
matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer
56 parts171 - 2 layers45 × 45 mm

Aeroq Hardware v3
EnriqueNeyra/Aeroq
An Indoor Air Quality Monitor Powered by ESP32, SCD40, and SEN54
56 parts130
Questions
How big is the Podal 1590b PCB?
It measures 54 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Podal 1590b use?
56 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Podal 1590b KiCad files?
From the motekulo/prog1 repository on GitHub, at the commit this page was made from: the board is hardware/1590b/podal_1590b.kicad_pcb and its schematic hardware/125b/125b.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Podal 1590b design in my own project?
Its repository states no licence, so its author keeps all rights: ask motekulo before reusing the design.