

125b
Design for a guitar effects pedal using the Daisy and Pd
- Size
- 59 × 75 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 50
- Nets
- 69
- Pads
- 183
- Tracks, vias
- 457, 31
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 7 Feb 2024
- Updated
- 4 Sep 2026
Overview
125b is an open-source printed circuit board by motekulo, from the motekulo/prog1 repository on GitHub. It is a 2-layer board of 59 × 75 mm with 50 parts on 69 nets, routed with 457 tracks and 31 vias.
Its parts include 22 resistors, 13 capacitors, 4 connectors, 3 diodes and 3 switches. It belongs with the audio and music boards of this library.
README
README.mdProg1
A guitar pedal that runs patches prototyped on a Daisy Pod.
ProgPedals is the site dedicated to this pedal, patches, and community.
Thanks
- For hardware thanks to work on the Dasiy Petal, the Terrarium, Hothouse and the work of Keith Shepherd
- Timothy Schoen and other developers (Alex Mitchell, for example) for Plugdata
- Wasted Audio for the Heavy hvcc compiler
- Graham Wakefield and Gregory Taylor for Generating Sound and Organizing Time
Videos
Roadmap
- Prog2 - using the Daisy Seed2 DFM
- ~~ Footswitch PCBs connected via IDC cable ~~
- ~~ Better audio sockets ~~
- ~~ SMD version as well as through hole. ~~
About me
I'm a musician/ lecturer - https://researchers.mq.edu.au/en/persons/denis-crowdy, https://codemusic.studio
Parts
50| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 1M | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R8, R9, R16, R17, R22 |
| 6 | 1k | Resistor_SMD:R_0805_2012Metric | R10, R11, R12, R13, R14, R15 |
| 6 | 1u | Capacitor_SMD:C_0805_2012Metric | C3, C8, C10, C11, C12, C13 |
| 4 | 100n | Capacitor_SMD:C_0805_2012Metric | C2, C4, C5, C6 |
| 2 | 100K | Resistor_SMD:R_0805_2012Metric | R20, R21 |
| 2 | 100R | Resistor_SMD:R_0805_2012Metric | R18, R19 |
| 2 | 2.2nF | Capacitor_SMD:C_0805_2012Metric | C7, C9 |
| 2 | 3.3K | Resistor_SMD:R_0805_2012Metric | R6, R7 |
| 2 | LED_RAGB | LED_THT:LED_D5.0mm-4_RGB_Wide_Pins | D2, D3 |
| 2 | SW_Push | Connector_Wire:SolderWire-0.5sqmm_1x02_P4.6mm_D0.9mm_OD2.1mm | SW3, SW4 |
| 1 | 100u | Capacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mm | C1 |
| 1 | 1N5819 | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D1 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_Horizontal | J2 |
| 1 | Conn_02x05_Odd_Even_MountingPin | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J3 |
| 1 | Electrosmith_Daisy_Seed_Rev4 | Project:Electrosmith_Daisy_Seed | A1 |
| 1 | Guitar in | Project:Jack_6.35mm_Neutrik_NMJ6HCD2_Horizontal | J1 |
| 1 | Guitar out | Project:Jack_6.35mm_Neutrik_NMJ6HCD2_Horizontal | J4 |
| 1 | Knob 1 | Project:Potentiometer_Alps_RK09K_Single_Vertical | RV1 |
| 1 | Knob 2 | Project:Potentiometer_Alps_RK09K_Single_Vertical | RV2 |
| 1 | L78L05_TO92 | Project:TO-92_Inline_Wide_78L05_dc | U1 |
| 1 | RotaryEncoder_Switch | Project:RotaryEncoder_Alps_EC12E-Switch_Vertical_H20mm | SW2 |
| 1 | TL074 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U2 |
More from motekulo/prog1
3- 2 layers54 × 60 mm

- 2 layers76 × 82 mm

- 2 layers34 × 58 mm

Similar boards
- 2 layers187.2 × 26.6 mm

- 2 layers45.7 × 25.9 mm

- 2 layers21 × 31.5 mm

- 2 layers42 × 32.5 mm

Lipoboard
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
50 parts915 - 2 layers80 × 109.5 mm

NucDeck Right Controller PCB - Rev 1.2
dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!
50 parts561CERN-OHL-S-2.0 - 2 layers101 × 31.5 mm

- 2 layers123.9 × 94.4 mm

- 2 layers50 × 25 mm

Mbus master
roarfred/AmsToMqttBridge
Minimalistic system to read AMS/HAN data from electrical meter
50 parts223
Questions
How big is the 125b PCB?
It measures 59 × 75 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 125b use?
50 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 125b KiCad files?
From the motekulo/prog1 repository on GitHub, at the commit this page was made from: the board is hardware/125b/125b.kicad_pcb and its schematic hardware/125b/125b.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 125b design in my own project?
Its repository states no licence, so its author keeps all rights: ask motekulo before reusing the design.