2 layers21.1 × 26.9 mm
2 layers37.7 × 68.4 mm
Remote start main pcb
mostlytoast/remote-pc-start- Size
- 37.7 × 68.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 45
- Pads
- 107
- Tracks, vias
- 120, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 25 May 2025
- Updated
- 25 May 2025
Overview
Remote start main pcb is an open-source printed circuit board by mostlytoast, from the mostlytoast/remote-pc-start repository on GitHub. It is a 2-layer board of 37.7 × 68.4 mm with 30 parts on 45 nets, routed with 120 tracks and 0 vias.
It is built around the BS170. Its parts include 6 resistors, 5 connectors, 3 ICs, 1 capacitor and 1 diode. It belongs with the ESP32 boards of this library.
Main components
1Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | MountingHole_Pad | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | H12, H13, H14, H15, H16, H17, H18, H19 |
| 4 | ~ | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | H41, H42, H43, H44 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9, R10 |
| 2 | 2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R6 |
| 1 | 10µf | Capacitor_THT:C_Radial_D4.0mm_H7.0mm_P1.50mm | C2 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
| 1 | 4.7k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | BS170 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Vertical | J3 |
| 1 | Conn_01x04_Pin | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-4P_1x04_P2.54mm_Horizontal | J4 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.00mm:PinHeader_1x06_P2.00mm_Vertical | J5 |
| 1 | ESP32-DEVKIT-V1 | ESP32-DEVKIT-V1:MODULE_ESP32_DEVKIT_V1 | U2 |
| 1 | LED | LED_THT:LED_D3.0mm_Horizontal_O6.35mm_Z6.0mm | D1 |
| 1 | SW_Push | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx83-2LFS | SW1 |
| 1 | internal-power-harness-in | Connector_PinHeader_2.00mm:PinHeader_2x04_P2.00mm_Vertical | J2 |
| 1 | internal-power-harness-out | Connector_PinHeader_2.00mm:PinHeader_2x04_P2.00mm_Vertical | J1 |
| 1 | power | Package_DIP:DIP-4_W7.62mm | U4 |
| 1 | sense | Package_DIP:DIP-4_W7.62mm | U3 |
Questions
How big is the Remote start main pcb PCB?
It measures 37.7 × 68.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Remote start main pcb use?
30 parts, built around the BS170. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Remote start main pcb KiCad files?
From the mostlytoast/remote-pc-start repository on GitHub, at the commit this page was made from: the board is remote-start-main-pcb/remote-start-main-pcb.kicad_pcb and its schematic flash drive/flash drive/flash drive.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Remote start main pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask mostlytoast before reusing the design.
Similar boards
- 2 layers94.6 × 46.1 mm
- 2 layers97.1 × 97 mm
- 2 layers121 × 68 mm
Freeds sanchez
pablozg/freeds
Derivador de energía solar excedente creado por Pablo Zerón, Diseño PCB por Amcalo, Tester original por Aeizoon, Wiki por Zoilo Mora
42 parts108 - 2 layers167.6 × 97.5 mm
AS3397 proto DIP
PhysicsDptAngers/polyUAnalog
Open source, analog and polyphonic synthesizer
142 parts88MIT - 2 layers70 × 55 mm
- 2 layers
T41-Main+RF board V012
DRWJSCHMIDT/T41
This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.
255 parts66 - 2 layers71.1 × 24.1 mm
Dactyl manuform gimbal
sffubs/dactyl_manuform_gimbal
Instrutions and designs for building the dactyl-manuform-gimbal keyboard
20 parts57