
KaSe
mornepousse/SpLiT_KaSe
Custom ergonomic split fully-wireless keyboard - ESP32-S3, NRF24L01+, KiCad 9

Custom ergonomic split fully-wireless keyboard - ESP32-S3, NRF24L01+, KiCad 9
Dongle is an open-source printed circuit board by mornepousse, from the mornepousse/SpLiT_KaSe repository on GitHub. It is a 4-layer board of 30 × 37.5 mm with 31 parts on 71 nets, routed with 347 tracks and 58 vias.
It is built around the CH340C, ESP32-S3-WROOM-1-N8 and AMS1117-3.3, with the CH334R and UMH3N among its other parts. Its parts include 14 resistors, 7 capacitors, 6 ICs, 1 transistor and 1 connector. It belongs with the keyboards and input boards and the ESP32 boards of this library.
USB dongle that receives keystrokes from both keyboard halves via NRF24L01+ and presents as USB HID to the host PC.
PC <--USB--> CH334R hub <--port1--> ESP32-S3 (USB HID native)
<--port2--> CH340C (flash/debug UART)
ESP32-S3 <--SPI--> NRF24L01+ #1 <--2.4GHz--> Left half
NRF24L01+ #2 <--2.4GHz--> Right half| Component | Role | Package |
|---|---|---|
| ESP32-S3-WROOM-2 | MCU, USB HID | Module |
| NRF24L01+ (x2) | Wireless RX from each half | Breakout |
| CH334R | USB 2.0 hub, crystal-free | QSOP-16 |
| CH340C | USB-to-UART for programming | SOP-16 |
| AMS1117-3.3 | 5V USB to 3.3V LDO | SOT-223 |
| UMH3N (x2) | Auto-reset (DTR/RTS to EN/IO0) | SOT-363 |
Single USB cable to PC, split internally:
Crystal-free mode: XI pin tied to GND.
Target: 30 x 35 mm including antennas, to fit in an M.2 network card slot.
USB 5V --> AMS1117-3.3 --> 3.3V for ESP32-S3, NRF24L01+, and all logic.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100 | Resistor_SMD:R_0603_1608Metric | R3, R4, R5, R6, R7, R8, R15, R16, R17 |
| 4 | 10uF | Capacitor_SMD:C_0603_1608Metric | C3, C4, C6, C7 |
| 3 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C5 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R18, R19, R20 |
| 2 | 220 | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | NRF24L01_Breakout | MaeLid:NRF24L01 | U2, U3 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | CH334R | Package_SO:QSOP-16_3.9x4.9mm_P0.635mm | U6 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U4 |
| 1 | ESP32-S3-WROOM-1 | PCM_Espressif:ESP32-S3-WROOM-1 | U7 |
| 1 | G*** | kibuzzard-69DE4944 | kibuzzard-69DE4944 |
| 1 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1 |
| 1 | UMH3N | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q1 |
| 1 | USB | MaeLid:1x04_SMD-2.54mm | J1 |

mornepousse/SpLiT_KaSe
Custom ergonomic split fully-wireless keyboard - ESP32-S3, NRF24L01+, KiCad 9

mornepousse/KeSp_dongle
Recepteur USB 2.4 GHz du clavier Niphargus et de la souris Conchodytes — ESP32-S3 / ESP32-P4, nRF24L01+, format M.2 Key B

kawashimaken/general-purpose-ken-interface
A modular, multi-MCU prototyping platform with a unified pin-assignment standard and horizontally-stackable expansion boards.

mornepousse/Niphargus
Niphargus — a slim, indestructible wireless split keyboard. ESP32 + nRF24, wired fallback, and an emergency kit hidden behind the USB port. The successor to the Rouge-Gorge.


KushlaVR/models-heart
Можливості: Керування через WIFI з телефона або ПК 5 незалежних каналів (світлодіоди/сервомотори) 1 Н-міст для підключення мотора (піковий струм до 3А) Вмонтована BMS 1S та контроллер заряду Li-Ion акумулятора з…


rh1tech/frank-lab
FRANK Board Laboratory (work-in-progress board prototopyes)

It measures 30 × 37.5 mm and has 4 copper layers, 1.6 mm thick.
31 parts, built around the CH340C, ESP32-S3-WROOM-1-N8, AMS1117-3.3 and CH334R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mornepousse/SpLiT_KaSe repository on GitHub, at the commit this page was made from: the board is dongle/dongle/dongle.kicad_pcb and its schematic KaSe.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask mornepousse before reusing the design.