2 layers50 × 34 mm
2 layers50 × 50 mm
Foobot controller interface
mooped/foobot4Foobot robot table football
- Size
- 50 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 23
- Pads
- 102
- Tracks, vias
- 224, 22
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 15 Mar 2015
- Updated
- 7 Jun 2022
Overview
Foobot controller interface is an open-source printed circuit board by mooped, from the mooped/foobot repository on GitHub, published under the MIT licence. It is a 2-layer board of 50 × 50 mm with 29 parts on 23 nets, routed with 224 tracks and 22 vias.
It is built around the ATTINY13A-SSU and 74LS165PC. Its parts include 12 connectors, 3 resistors, 2 ICs, 1 capacitor and 1 transistor. It belongs with the interfaces and adapters boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ATTINY13A-SSU
SOIC-8-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 6 64Byte 64Byte 8 Bit AVR Built-in FLASH SOIC-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
74LS165PC
DIP-160.4mA 0℃~+70℃ 105mW 35MHz 4.75V~5.25V 47ns@5V,50pF 8 8mA Asynchronous parallel load function Complementary Parallel-to-Serial DIP-16 Shift RegistersTexas InstrumentsShift Registers
README
README.mdfoobot
Robot table football using cheap 433mhz radio modules and classic Nintendo and Sega controllers
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | P*** | 1pin | , , , , , |
| 2 | 10k | SM1206 | R1, R3 |
| 2 | AUX | PIN_ARRAY_1 | P11, P12 |
| 1 | 6.7k | SM1206 | R4 |
| 1 | 74LS165 | DIP-16__300 | U2 |
| 1 | ATTINY13A-SS | SO8N | IC1 |
| 1 | AUX_IN | PIN_ARRAY_1 | P10 |
| 1 | C | SM1206 | C2 |
| 1 | CHANNEL_1 | PAD_ARRAY-6X1 | P6 |
| 1 | CHANNEL_2 | PAD_ARRAY-6X1 | P8 |
| 1 | CHANNEL_X | PIN_ARRAY-6X1 | P35 |
| 1 | CONN_1 | PIN_ARRAY_1 | P36 |
| 1 | ISP | pad_array_3x2 | P5 |
| 1 | MCU_PWR | PAD_ARRAY_2X1 | P9 |
| 1 | NES | D-CANNON_COMPACT | NES |
| 1 | NPN | SOT23_INV | Q2 |
| 1 | RESET | PAD_ARRAY_2X1 | P4 |
| 1 | R_PACK8_COMMON | SIL-9 | RP1 |
| 1 | SMS | pin_array_2x4 | SMS |
| 1 | TX | PAD_ARRAY_3X1 | K2 |
| 1 | ¬LATCH | PIN_ARRAY_1 | P39 |
| 1 | ¬Q7 | PIN_ARRAY_1 | P15 |
Questions
How big is the Foobot controller interface PCB?
It measures 50 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Foobot controller interface use?
29 parts, built around the ATTINY13A-SSU and 74LS165PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Foobot controller interface KiCad files?
From the mooped/foobot repository on GitHub, at the commit this page was made from: the board is boards/transmitter/foobot_controller_interface.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Foobot controller interface design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from mooped/foobot
1Similar boards
- 2 layers33 × 30 mm
Mora villogo
kissadamfkut/mora_blinker
Simple LED blinker with ATtiny13A for educational purposes
21 parts34MIT - 2 layers200 × 100 mm
Keyboard
dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere
225 parts14Apache-2.0 - 2 layers
TX5823
ep092/TX5823
FPV Sender mit Kanalwahl und konfiguration über SPI. Integriertes OSD mit MAX7456 und Spannungswandlern für 5V, 3,3V und 12V über einen Eingangsspannungsbereich von 8V bis 25.2V.
94 parts9 - 2 layers10.2 × 22.3 mm
- 2 layers27.9 × 66.2 mm
- 2 layers
- 2 layers90 × 100 mm
Meshcore NaIon
Alksndr55/mesh-repeater
Mesh Repeater v1 — одноплатный LoRa-репитер для MeshCore и Meshtastic, 90×100 мм. Упор на максимальное энергосбережение и работу в суровых сибирских зимах. Солнечный зарядник, Na-ion 1S / LTO 2S.
154 parts3 - 2 layers51 × 70 mm
Auto dimmer
ilyushkin/auto_dimmer
Automatic dimmer for IKEA NYMANE (103.569.62) lamp based on AVR ATtiny13A MCU.
56 parts2GPL-3.0