

Keyboard
60% keyboard
- Size
- 295.8 × 105.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 144
- Nets
- 105
- Pads
- 682
- Tracks, vias
- 738, 20
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 3 Nov 2021
- Updated
- 3 Nov 2021
Overview
Keyboard is an open-source printed circuit board by monahanc, from the monahanc/Minr60 repository on GitHub. It is a 2-layer board of 295.8 × 105.3 mm with 144 parts on 105 nets, routed with 738 tracks and 20 vias.
It is built around the ATMEGA32U4-AU and USBLC6-4SC6. Its parts include 6 capacitors, 5 resistors, 2 ICs, 2 connectors and 1 switch. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATMEGA32U4-AU
QFP-44(10x10)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH QFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)USBLC6-4SC6
SOT-23-6-55℃~+125℃ 0.3pF 15V 300W@8/20us 4.7A@8/20us 5V 6V 80nA ESD Four channels IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Unidirectional SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
Parts
144| Qty | Value | Footprint | References |
|---|---|---|---|
| 63 | D | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D_0, D_1, D_2, D_3, D_4, D_5, D_6, D_7, D_8, D_9, D_A1, D_B1, D_BSLSH1, D_C1, D_CBRAC1, D_CMD1 +47 |
| 54 | KEYSW | MX_Alps_Hybrid:MX-1U-NoLED | K_0, K_1, K_2, K_3, K_4, K_5, K_6, K_7, K_8, K_9, K_A1, K_B1, K_C1, K_CBRAC1, K_COMMA1, K_CTRL1 +38 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C5 |
| 2 | 22 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 2 | 22p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4 |
| 2 | KEYSW | MX_Alps_Hybrid:MX-2.25U-NoLED | K_ENTER1, K_SHIFT1 |
| 2 | KEYSW | MX_Alps_Hybrid:MX-1.25U-NoLED | K_CMD1, K_PLAY1 |
| 2 | KEYSW | MX_Alps_Hybrid:MX-1.5U-NoLED | K_BSLSH1, K_TAB1 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 16MHz | Crystal:Crystal_SMD_ECS_CSM3X-2Pin_7.6x4.1mm | Y1 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | ATmega32U4-AU | Package_QFP:TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | AVR-ISP-6 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J2 |
| 1 | Ferrite_Bead_Small | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | FB1 |
| 1 | KEYSW | MX_Alps_Hybrid:MX-1.75U-NoLED | K_ESC1 |
| 1 | KEYSW | MX_Alps_Hybrid:MX-6.25U-NoLED | K_SPACE1 |
| 1 | KEYSW | MX_Alps_Hybrid:MX-2U-NoLED | K_DELETE1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | USBLC6-4SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J1 |
Similar boards
- 2 layers128 × 70 mm

- 4 layers59.2 × 66 mm

- 4 layers94.4 × 72.8 mm

RP2040 base
Twisted-Fields/rp2040-motor-controller
A dual channel brushless motor controller based on the RP2040 microcontroller, designed in Kicad.
325 parts419 - 2 layers28 × 30 mm

- 2 layers51 × 18.5 mm

Entree
tuna-f1sh/entree
Entree is a USB-C CAN interface designed to fully support CANnectivity - gets the CAN party started!
78 parts89 - 2 layers99.8 × 99.8 mm

Stmbl 5.0
freakontrol/stmbl
THE AUTHORS OF THIS SOFTWARE ACCEPT ABSOLUTELY NO LIABILITY FOR ANY HARM OR LOSS RESULTING FROM ITS USE. IT IS EXTREMELY UNWISE TO RELY ON SOFTWARE ALONE FOR SAFETY.
432 parts53GPL-3.0 - 2 layers85 × 50 mm

APPMC
tdjastrzebski/All-Purpose-Power-Micro-Controller
General purpose power controller, capable of driving soldering irons using different voltages and probe types.
117 parts40 - 2 layers194 × 114.1 mm

Questions
How big is the Keyboard PCB?
It measures 295.8 × 105.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Keyboard use?
144 parts, built around the ATMEGA32U4-AU and USBLC6-4SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Keyboard KiCad files?
From the monahanc/Minr60 repository on GitHub, at the commit this page was made from: the board is keyboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Keyboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask monahanc before reusing the design.