

MoirePCB
Kicad files and production gerbers for Moiré sensors
- Size
- 38 × 215.8 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 57
- Nets
- 91
- Pads
- 278
- Tracks, vias
- 794, 91
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 13 Sep 2023
- Updated
- 3 Nov 2025
Overview
MoirePCB is an open-source printed circuit board by moire-cs, from the moire-cs/fcat-sensor-kicad repository on GitHub. It is a 4-layer board of 38 × 215.8 mm with 57 parts on 91 nets, routed with 794 tracks and 91 vias.
It is built around the CH340E, ESP32-PICO-D4 and TLV73333PDBV, with the BQ25504RGT and RFM95W-915S2 among its other parts. Its parts include 10 ICs, 8 capacitors, 6 resistors, 1 connector and 1 crystal. It belongs with the ESP32 and RISC-V boards of this library.
Main components
5CH340E
MSOP-10150uA 20mA 2Mbps 3.3V、5V Transceiver USB 2.0 MSOP-10 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersESP32-PICO-D4
QFN-48-EP(7x7)-40℃~+85℃ -97dBm 150Mbps 2.412GHz~2.484GHz 2.4GHz 2.7V~3.6V 20dBm Bluetooth、WiFi SPI、I2C transceiver QFN-48-EP(7x7) RF Transceiver ICs ROHSEspressif SystemsRF Transceiver ICsTLV73333PDBV
SOT-23-5-40℃~+125℃@(Tj) 1 125mV@(300mA) 28uVrms 3.3V 300mA 34uA 5.5V 50dB@(1kHz) Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Enable SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsBQ25504RGT
VQFN-16-EP(3x3)-40℃~+105℃ 130mV~3V、2.5V~5.25V 300mA 330nA Supercapacitor、Lithium Battery 可编程充电电流、过放保护 VQFN-16-EP(3x3) Battery Management ROHSTexas InstrumentsBattery ManagementRFM95W-915S2
LCC-16_16X16mmLCC-16_16X16mm New Arrivals ROHSHopeRF Micro-electronicsUncategorised
Parts
57| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | ACC_RAIL_JP1, BATTMEASURE_JP1, FREQOUT_JP1, LDO_JP1, TEMP_SCL_JP1, TEMP_SDA_JP1, VBAT_OK1 |
| 2 | 12pF/50V | Capacitor_SMD:C_0805_2012Metric | C2, C6 |
| 2 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C_HVR1, C_STOR1 |
| 2 | 6.19M | Resistor_SMD:R_0805_2012Metric | R_OK_2, R_UV_2 |
| 2 | AP2281-1WG-7 | Package_TO_SOT_SMD:SOT-23-6 | U8, U9 |
| 2 | SW_DPDT_x2 | Button_Switch_SMD:SW_SPDT_PCM12 | USB//OFF1, USB//SOLAR1 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | BOOT1, EN1 |
| 2 | TLV73333PDBV | Package_TO_SOT_SMD:SOT-23-5 | U3, U10 |
| 1 | .01uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | .143M | Resistor_SMD:R_0805_2012Metric | R_OK_3 |
| 1 | .1u | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | .1uF | Capacitor_SMD:C_0805_2012Metric | C_FLTR1 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | 10M | Resistor_SMD:R_0805_2012Metric | R_OC+10 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 10n | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 22uH | Inductor_SMD:L_0805_2012Metric | L_BST1 |
| 1 | 270k | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 3.57M | Resistor_SMD:R_0805_2012Metric | R_OK_1 |
| 1 | 3.74M | Resistor_SMD:R_0805_2012Metric | R_UV_1 |
| 1 | 32.768kHz | Crystal:Crystal_SMD_MicroCrystal_CM9V-T1A-2Pin_1.6x1.0mm | Y2 |
| 1 | 360k | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | 4.12M | Resistor_SMD:R_0805_2012Metric | R_OC_2 |
| 1 | 4.42M | Resistor_SMD:R_0805_2012Metric | R_OV_1 |
| 1 | 5.1k | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 5.36M | Resistor_SMD:R_0805_2012Metric | R_OV_2 |
| 1 | 5.76M | Resistor_SMD:R_0805_2012Metric | R_OC_1 |
| 1 | 820k | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | BQ25504 | Package_DFN_QFN:VQFN-16-1EP_3x3mm_P0.5mm_EP1.68x1.68mm | U2 |
| 1 | Battery_Cell | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | BT1 |
| 1 | CH340E | Package_SO:MSOP-10_3x3mm_P0.5mm | U5 |
| 1 | ESP32-PICO-D4 | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.3x5.3mm | U1 |
| 1 | HDC1080 | Package_SON:Texas_PWSON-N6 | U7 |
| 1 | RFM95W-915S2 | RF_Module:HOPERF_RFM9XW_SMD | U4 |
| 1 | R_Photo 50k-100k | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | LDR1 |
| 1 | Solar_Cell | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | SC1 |
| 1 | T1-915M Antenna | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | AE1 |
| 1 | TLC555xD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | USB_C_Receptacle | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
The 55 most common of 57 parts.
More from moire-cs/fcat-sensor-kicad
1- 2 layers

Similar boards
- 4 layers80 × 50 mm

- 2 layers77.9 × 100 mm

Power distribution
Haxintosh/tiled-pcb-heater
Scalable and modular 3D printer heated bed
216 parts2CERN-OHL-P-2.0 - 2 layers94 × 99.7 mm

Battlebot
momin3121/battlebot-MNH-V01
const int enA1Pin = 13; const int in11Pin = 12; const int in21Pin = 16; const int enB1Pin = 10; const int in31Pin = 17; const int in41Pin = 9;
35 parts - 2 layers

- 2 layers9 × 9 mm

- 4 layers23.4 × 25.4 mm

Low Power LoRa
SorenGilkeyJohnson/LowLoRa
A solar powered, batteryless LoRa (expandable) sensor node powered from a supercapacitor charged by a small solar cell using an energy harvester.
70 parts3CERN-OHL-S-2.0 - 2 layers50 × 45.3 mm

Tempic HW
jernej13/Tempic
Small solarpowered ESP32 based indoor/outdoor wifi weather station.
61 parts2MIT - 2 layers37.7 × 36.4 mm

SolarPanel
ashwing123/SolarPCB
Created a Printed Circuit Board (PCB) that harvests energy from a PV, with the main component being a bq25504 microcontroller that controls the overvoltage and undervoltage for effective charge storage in a 1F…
28 parts
Questions
How big is the MoirePCB PCB?
It measures 38 × 215.8 mm and has 4 copper layers, 1.6 mm thick.
What parts does the MoirePCB use?
57 parts, built around the CH340E, ESP32-PICO-D4, TLV73333PDBV and BQ25504RGT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MoirePCB KiCad files?
From the moire-cs/fcat-sensor-kicad repository on GitHub, at the commit this page was made from: the board is moirePCB/moirePCB.kicad_pcb and its schematic CapSensor/CapSensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MoirePCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask moire-cs before reusing the design.