
BQ25504RGT
Texas InstrumentsExtended
-40℃~+105℃ 130mV~3V、2.5V~5.25V 300mA 330nA Supercapacitor、Lithium Battery 可编程充电电流、过放保护 VQFN-16-EP(3x3) Battery Management ROHS
- Part id
- ti/BQ25504RGT
- Category
- Battery Management
- Package
- VQFN-16-EP(3x3)
- Pins
- 17
- In stock
- 969 at JLCPCB (C2876746)
- Used on
- 16 open-source boards
Overview
The BQ25504RGT is a battery Management made by Texas Instruments in a VQFN-16-EP(3x3) package with 17 pins. -40℃~+105℃ 130mV~3V、2.5V~5.25V 300mA 330nA Supercapacitor、Lithium Battery 可编程充电电流、过放保护 VQFN-16-EP(3x3) Battery Management ROHS.
PCBKit's library has its KiCad symbol (Battery_Management:BQ25504, from KiCad's library) and its footprint (Package_DFN_QFN:VQFN-16-1EP_3x3mm_P0.5mm_EP1.68x1.68mm, from KiCad's library), ready for a KiCad board. 969 are in stock at JLCPCB (part C2876746). 16 open-source boards in 15 repositories on GitHub use it.
Symbol
Footprint
Pinout
17| Pin | Name | Type |
|---|---|---|
| 1 | VSS | Power in |
| 2 | VIN_DC | Power in |
| 3 | VOC_SAMP | Input |
| 4 | VREF_SAMP | Input/output |
| 5 | OT_PROG | Input |
| 6 | VBAT_OV | Input |
| 7 | VRDIV | Output |
| 8 | VBAT_UV | Input |
| 9 | OK_HYST | Input |
| 10 | OK_PROG | Input |
| 11 | VBAT_OK | Output |
| 12 | AVSS | Power in |
| 13 | VSS | Passive |
| 14 | VBAT | Power out |
| 15 | VSTOR | Input/output |
| 16 | LBST | Input/output |
| 17 | PAD | Passive |
- 2 layers

- 2 layers9 × 9 mm

- 4 layers23.4 × 25.4 mm

Low Power LoRa
SorenGilkeyJohnson/LowLoRa
A solar powered, batteryless LoRa (expandable) sensor node powered from a supercapacitor charged by a small solar cell using an energy harvester.
70 parts3CERN-OHL-S-2.0 - 2 layers50 × 45.3 mm

Tempic HW
jernej13/Tempic
Small solarpowered ESP32 based indoor/outdoor wifi weather station.
61 parts2MIT - 4 layers38 × 215.8 mm

- 2 layers37.7 × 36.4 mm

SolarPanel
ashwing123/SolarPCB
Created a Printed Circuit Board (PCB) that harvests energy from a PV, with the main component being a bq25504 microcontroller that controls the overvoltage and undervoltage for effective charge storage in a 1F…
28 parts - 2 layers50 × 35 mm

- 2 layers179.8 × 116.7 mm

Parts like it
3BQ24230RGTR
VQFN-16-EP(3x3)-40℃~+125℃ 4.2V 4.35V~6.4V 500mA 6.5uA Charging IC Lithium Battery Not supported Support VQFN-16-EP(3x3) Battery Management ROHSTexas InstrumentsBattery ManagementBQ24230RGTT
VQFN-16-EP(3x3)-40℃~+125℃ 1 4.2V 4.35V~6.4V 500mA 6.5uA Charging IC Lithium Battery Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定、Short-Circuit Protection、过压保护 VQFN-16-EP(3x3) Battery Management ROHSTexas InstrumentsBattery ManagementBQ24230RGTRG4
VQFN-16(3x3)-40℃~+85℃ 1 4.23V 4.35V~6.6V 500mA Charging IC Lithium Battery Support VQFN-16(3x3) Battery Management ROHSTexas InstrumentsBattery Management
Questions
Is there a KiCad symbol and footprint for the BQ25504RGT?
Yes. The symbol is Battery_Management:BQ25504 and the footprint Package_DFN_QFN:VQFN-16-1EP_3x3mm_P0.5mm_EP1.68x1.68mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the BQ25504RGT?
VQFN-16-EP(3x3), with 17 pins. Its footprint is drawn on this page.
Where is the BQ25504RGT datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the BQ25504RGT?
JLCPCB lists it as part C2876746, with 969 in stock; the sellers' links on this page open their listings.
What can replace the BQ25504RGT?
Parts like it in the library: the BQ24230RGTR by Texas Instruments, the BQ24230RGTT by Texas Instruments and the BQ24230RGTRG4 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the BQ25504RGT?
16 boards in 15 repositories on GitHub; the most starred are listed on this page, with their KiCad files.