2 layers39.1 × 32 mm
2 layers82.6 × 23.5 mm
The PCB files for the modular vertical farming project
- Size
- 82.6 × 23.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 47
- Pads
- 100
- Tracks, vias
- 323, 13
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 9 Jun 2015
- Updated
- 9 Jun 2015
Overview
KiCad1 is an open-source printed circuit board by modular-vertical-farming, from the modular-vertical-farming/module-pcb repository on GitHub, published under the MIT licence. It is a 2-layer board of 82.6 × 23.5 mm with 15 parts on 47 nets, routed with 323 tracks and 13 vias.
It is built around the ATMEGA168PA-AU. Its parts include 8 connectors, 3 capacitors, 2 resistors, 1 IC and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdmodule-pcb
The module pcb files for the modular vertical farming project
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100nF | Capacitors_ThroughHole:C_Rect_L7_W2.5_P5 | C1, C2, C3 |
| 2 | CONN_01X03 | smd3:Pin_Header_SMD_1x03 | P9, P10 |
| 1 | 100Ω | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R2 |
| 1 | 10kΩ | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R1 |
| 1 | ATMEGA168-P | Housings_DIP:DIP-28__300 | IC1 |
| 1 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02 | P4 |
| 1 | CONN_01X02 | smd3:Pin_Header_SMD_1x02 | P11 |
| 1 | CONN_FTDI | Pin_Headers:Pin_Header_Straight_1x06 | P1 |
| 1 | I2C | Pin_Headers:Pin_Header_Straight_1x02 | P3 |
| 1 | ICSP | Pin_Headers:Pin_Header_Straight_2x03 | P2 |
| 1 | LED | LEDs:LED-3MM | D1 |
| 1 | PCI_LIKE_MODVFARM | smd3:PCI-EXPRESS_NOROUNDED | J1 |
Questions
How big is the KiCad1 PCB?
It measures 82.6 × 23.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the KiCad1 use?
15 parts, built around the ATMEGA168PA-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the KiCad1 KiCad files?
From the modular-vertical-farming/module-pcb repository on GitHub, at the commit this page was made from: the board is KiCad1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the KiCad1 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers58.4 × 41.7 mm
Stepper board
felixzero/escrocs
Repository for the ESCROCS team for the french robotics cup 2020!
81 parts7GPL-3.0 - 2 layers75 × 40 mm
Remote
bismarx-v1/Sumec-Remote
IR remote for MiniSumo, schematic and partial code was forked from p1rse
47 parts1 - 2 layers100 × 50 mm
Led strip dmx
lrvdijk/ledstrip-dmx-receiver
KiCad Project for a DMX receiver driving a LED strip with 5050 SMD RGB LEDs.
38 parts1 - 2 layers76.2 × 77.5 mm
Avr programmer
jdhp-pcb/pcb-atmega-xx8-isp-board
Copyright (c) 2014 Jeremie DECOCK (http://www.jdhp.org)
9 partsMIT - 2 layers57.8 × 31.1 mm
- 2 layers149 × 100 mm
- 2 layers30.5 × 30.5 mm
Lpkf test
AravinthPanch/various-hardware-projects
Collection of various PCB designs and Firmware for prototyping projects
7 parts16Apache-2.0