4 layers286.5 × 96.1 mm
Schematics
oats-center/avena-rs
Avena On The Road: Bringing pavement health data to your fingertips
74 parts3
2 layers75 × 40 mm
Remote
bismarx-v1/Sumec-Remote1IR remote for MiniSumo, schematic and partial code was forked from p1rse
- Size
- 75 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 52
- Pads
- 162
- Tracks, vias
- 239, 26
- Pours
- 27
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 30 Aug 2024
- Updated
- 17 Jul 2025
Overview
Remote is an open-source printed circuit board by bismarx-v1, from the bismarx-v1/Sumec-Remote repository on GitHub. It is a 2-layer board of 75 × 40 mm with 47 parts on 52 nets, routed with 239 tracks and 26 vias.
It is built around the ATMEGA168PA-AU, DS04-254-1-05BK-SMT and IR204-A-L, with the ABM8G-16.000MHZ-18-D2Y-T, DMG6968U-7(ES) and YC248-JR-0710KL among its other parts. Its parts include 18 resistors, 8 diodes, 6 capacitors, 3 switches and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
6
ATMEGA168PA-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 16KB 1KB 20MHz 23 512Byte 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)DS04-254-1-05BK-SMT
SMD,P=2.54mm-40℃~+85℃ 2,000 cycles 2.54mm 24V 25mA 5 Gull Wing SPST Slide, Rocked SMD,P=2.54mm DIP Switches ROHSCUIDIP Switches
IR204-A-L
插件5.6mW/sr@IF=20mA 插件,D=3mm Infrared LED Emitters ROHSEverlight ElectronicsInfrared LED Emitters
ABM8G-16.000MHZ-18-D2Y-T
SMD3225-4P-40℃~+85℃ 16MHz 18pF 80Ω ±20ppm ±30ppm SMD3225-4P Crystals ROHSAbraconCrystals
DMG6968U-7(ES)
SOT-23SOT-23 MOSFETs ROHSElecSuperMOSFETs
YC248-JR-0710KL
0402x810kΩ 16 62.5mW 8 ±200ppm/℃ ±5% 0402x8 Resistor Networks, Arrays ROHSYAGEOResistor Networks & Arrays
README
-PCB-/REMOTE/README.mdOriginal project repository: https://github.com/p1rse/robot-sumo-start-module
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R5, R6, R7, R15 |
| 4 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R11, R12, R13 |
| 4 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D5, D6, D7, D8 |
| 3 | 2.2R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R4, R8 |
| 3 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW3 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP3 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3 |
| 2 | 10uF | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder | C1, C4 |
| 2 | 18pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6 |
| 2 | 220R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R9 |
| 2 | IR204A | LED_THT:LED_D3.0mm_Horizontal_O3.81mm_Z10.0mm_no_silk | D1, D3 |
| 2 | Mounting Hole M3 | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H3, H4 |
| 1 | ABM8G-16.000MHZ-18-D2Y-T | sumec-remote_library:crystal_smd | Y1 |
| 1 | ATmega168PA-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | AVR-ISP-6 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | Battery | Battery:BatteryHolder_Keystone_2462_2xAA - no holes | BT1 |
| 1 | DMG6968U-7 | Package_TO_SOT_SMD:SOT-23-3 | Q1 |
| 1 | DS04-254-1-05BK-SMT | sumec-remote_library:dip_switch | IC1 |
| 1 | IR204A | LED_THT:LED_D3.0mm_Horizontal_O3.81mm_Z10.0mm_flipped_no_silk | D2 |
| 1 | IR204A | LED_THT:LED_D3.0mm_Horizontal_O3.81mm_Z10.0mm_flipped | D4 |
| 1 | R | sumec-remote_library:boi | R17 |
| 1 | R | sumec-smdV2_library:Logo | R18 |
| 1 | R | sumec-remote_library:purosidenegative | R14 |
| 1 | R | sumec-smdV2_library:SPS LOGO | R16 |
| 1 | YC248-JR-0710KL | sumec-remote_library:resistor_array | RN1 |
Questions
How big is the Remote PCB?
It measures 75 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Remote use?
47 parts, built around the ATMEGA168PA-AU, DS04-254-1-05BK-SMT, IR204-A-L and ABM8G-16.000MHZ-18-D2Y-T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Remote KiCad files?
From the bismarx-v1/Sumec-Remote repository on GitHub, at the commit this page was made from: the board is -PCB-/REMOTE/Remote.kicad_pcb and its schematic -PCB-/REMOTE/Remote.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Remote design in my own project?
Its repository states no licence, so its author keeps all rights: ask bismarx-v1 before reusing the design.
Similar boards
- 2 layers
- 2 layers40 × 70 mm
KinetiCoreDC
axpaul/KinetiCoreDC
Compact STM32G0-based DC motor controller board featuring TI DRV8874 H-bridge drivers, RS485 communication, optoisolated I/O, and hardware power protection.
183 parts1CERN-OHL-S-2.0 - 2 layers68.6 × 53.3 mm
Avyduino
avycado13/avyduino
My take on the classic Arduino UNO. Powered by the same chips, but using a USB-C socket.
42 parts - 4 layers100 × 100 mm
TouchDrum V2.0
JoelEB/Touch_Drum
A repo for all thing TouchDrum Related: hardware/software files, 3D files, etc.
143 parts - 4 layers80.9 × 66.5 mm
Schema
Krypthick/Prototype-Bras-Continuum
Ce repo contient les schemas, les cartes imprimées, les codes sources, etc du projet.
81 parts - 2 layers39.1 × 32 mm
- 2 layers58.4 × 41.7 mm
Stepper board
felixzero/escrocs
Repository for the ESCROCS team for the french robotics cup 2020!
81 parts7GPL-3.0