4 layers30 × 40 mm
2 layers75 × 140 mm
Proposal for FPGA workshop badge for Hackaday Belgrade 2018
- Size
- 75 × 140 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 45
- Nets
- 43
- Pads
- 199
- Tracks, vias
- 671, 80
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 10 Feb 2018
- Updated
- 17 May 2018
Overview
Badge is an open-source printed circuit board by mmicko, from the mmicko/workshop_badge repository on GitHub. It is a 2-layer board of 75 × 140 mm with 45 parts on 43 nets, routed with 671 tracks and 80 vias.
It is built around the TPS61165DBV and MBR0540. Its parts include 18 resistors, 9 connectors, 7 switches, 4 capacitors and 1 IC. It belongs with the fPGA and programmable logic and lEDs and displays boards and the FPGA and CPLD boards of this library.
Main components
2
TPS61165DBV
SOT-23-6-40℃~+85℃ 1 1.2A 1.2MHz 2% 3V~18V 3V~38V Boost Built-in DC-DC Over Voltage Protection、Over-Temperature Protection (OTP) PWM SOT-23-6 LED Drivers ROHSTexas InstrumentsLED Drivers
MBR0540
SOD-123-55℃~+150℃ 1 Independent 20uA@40V 40V 5.5A 500mA 510mV@500mA SOD-123 Schottky Diodes ROHSonsemiSchottky Diodes
README
README.mdWorkshop Badge
Parts
45| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10k | Resistors_SMD:R_0603 | R1, R3, R4, R5, R6, R7, R8, R18 |
| 6 | 10K | Resistors_SMD:R_0603 | R10, R11, R12, R13, R14, R15 |
| 6 | SW_Push | Buttons_Switches_THT:SW_PUSH-12mm | SW1, SW2, SW3, SW4, SW5, SW6 |
| 3 | DNP | Resistors_SMD:R_0603 | R9, R16, R17 |
| 2 | 10µ | Capacitors_SMD:C_0805 | C1, C4 |
| 2 | HOLE | Mounting_Holes:MountingHole_3.2mm_M3 | J3, J4 |
| 1 | 10 | Resistors_SMD:R_0603 | R2 |
| 1 | 10µH/A915AY-100M | Custom Parts:muRata_L_2020 | L1 |
| 1 | 1µ/50V | Capacitors_SMD:C_0805 | C3 |
| 1 | 220n | Capacitors_SMD:C_0603 | C2 |
| 1 | Audio-Jack-3 | Custom Parts:AUDIO_JACK_3.5mm | J2 |
| 1 | Conn_01x02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | BATTERY1 |
| 1 | Conn_01x16 | Pin_Headers:Pin_Header_Straight_1x16_Pitch2.54mm | UPDUINO2_DOWN1 |
| 1 | Conn_01x18 | Pin_Headers:Pin_Header_Straight_1x18_Pitch2.54mm | UPDUINO2_UP1 |
| 1 | ICESTUDIO_LOGO | Custom Parts:ICESTUDIO | J11 |
| 1 | ICOTC_LOGO | Custom Parts:ICOTC | J6 |
| 1 | KICAD_LOGO | Symbols:KiCad-Logo_12mm_SilkScreen | J8 |
| 1 | LQ035NC111 | Custom Parts:MOLEX_51296-5494_54pin_0.5mm_BTM | LCD1 |
| 1 | MBR0540 | Diodes_SMD:D_SOD-123 | D1 |
| 1 | OSHPARK_LOGO | Custom Parts:OSHPARK | J7 |
| 1 | OSHW_LOGO | Symbols:OSHW-Logo2_24.3x20mm_SilkScreen | J5 |
| 1 | PMOD | Custom Parts:Pin_Header_Angled_2x06_Pitch2.54mm_PMOD | J1 |
| 1 | SW_SPDT | Buttons_Switches_THT:SW_CuK_OS102011MA1QN1_SPDT_Angled | SW7 |
| 1 | TPS61165 | TO_SOT_Packages_SMD:SOT-23-6 | U1 |
Questions
How big is the Badge PCB?
It measures 75 × 140 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Badge use?
45 parts, built around the TPS61165DBV and MBR0540. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Badge KiCad files?
From the mmicko/workshop_badge repository on GitHub, at the commit this page was made from: the board is badge.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Badge design in my own project?
Its repository states no licence, so its author keeps all rights: ask mmicko before reusing the design.
Similar boards
- 4 layers35.9 × 43.1 mm
- 4 layers68.6 × 53.3 mm
- 2 layers54.6 × 61 mm
- 2 layers65 × 75 mm
- 2 layers100 × 103.5 mm
- 2 layers65 × 56 mm
- 6 layers146.1 × 58.4 mm
Comp Board
badaboombox/SS-Handheld-Console
An open-source handheld game console built around a Lattice ECP5 FPGA that uses a custom hybrid 2D + 3D graphics engine capable of DS-era 2D-and-3D gameplay at a locked 60 fps.
248 parts6