6 layers100.3 × 68.6 mm
MYRIAD RD 5.1.2.unrouted
aspdac-submission-pcb-layout/PCB-Layout-Framework
This repository has been prepared from the original. Some care has been taken to remove the names of the authors.
984 parts7BSD-3-Clause
2 layers101.1 × 101.1 mm
MPPB01
mlab-modules/MPPB01Mechanical parallella peripheral board
- Size
- 101.1 × 101.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 197
- Pads
- 419
- Tracks, vias
- 5,910, 249
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 15 Jun 2020
- Updated
- 17 Sep 2023
Overview
MPPB01 is an open-source printed circuit board by mlab-modules, from the mlab-modules/MPPB01 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 101.1 × 101.1 mm with 27 parts on 197 nets, routed with 5,910 tracks and 249 vias.
It is built around the BTH-030-01-F-D-A. Its parts include 10 connectors, 4 capacitors, 3 resistors, 1 diode and 1 switch.
Main components
1README
README.mdMPPB01A - Mechanical Parallella peripheral board
Elecromechanical interface to Parallella board. The module is especially useful for connection of multi-channel or high-speed ADCs.
Parameters
| Parameter | Value | Description |
|---|---|---|
| LVDS connector | 2x miniSAS | |
| Service interface | Pin-header | |
| Operating and storage temperature | -20 - +40°C | |
| Operational input voltage | 4.9 - 5.2V | |
| I²C interface levels | 5V | |
| UART interface levels | 3.3V |
Usage examples
Lightning mapping devices
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | BTH-030-01-F-D-A | Mlab_CON:SAMTEC-BTH-030-01-X-D-A | P1, P2, P3, P4 |
| 4 | HOLE | Mlab_Mechanical:MountingHole_3mm | MH5, MH6, MH7, MH8 |
| 4 | MTG\PTH\125\SQ | adapteva-kicad:MTG_PTH_125_SQ | MH1, MH2, MH3, MH4 |
| 3 | 100nF/16V | Capacitor_SMD:C_0805_2012Metric | C1, C3, C4 |
| 2 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | SAS_mini_1888174-6 | Mlab_CON:SAS-mini_TEConnectivity_1888174_Vertical | P5, P6 |
| 1 | 100uF/6V3 | Capacitor_SMD:C_1210_3225Metric | C2 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | HEADER_2x03_PARALLEL | Mlab_Pin_Headers:Straight_2x03 | P9 |
| 1 | HEADER_2x05_PARALLEL | Mlab_Pin_Headers:Straight_2x05 | P11 |
| 1 | HEADER_2x13 | Mlab_Pin_Headers:Straight_2x13 | P7 |
| 1 | M4 | Diode_SMD:D_SMA | D1 |
| 1 | Prepinac | Mlab_SW:SW_PUSH_SMALL | SW1 |
| 1 | SATA7-67491-1030 | Mlab_CON:SATA-7_THT_VERT_2 | P10 |
Questions
How big is the MPPB01 PCB?
It measures 101.1 × 101.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MPPB01 use?
27 parts, built around the BTH-030-01-F-D-A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MPPB01 KiCad files?
From the mlab-modules/MPPB01 repository on GitHub, at the commit this page was made from: the board is hw/sch_pcb/MPPB01.kicad_pcb and its schematic hw/sch_pcb/MPPB01.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MPPB01 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers47.6 × 27.3 mm
- 2 layers77.4 × 77.4 mm
CORAZON LEDS CON FADE
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
27 parts915 - 2 layers44.2 × 29.3 mm
- 2 layers40 × 40 mm
- 2 layers22 × 42 mm
Nvme bm to e
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
27 parts253GPL-3.0 - 2 layers80 × 61 mm
PicoProducer
pjgpetecodes/pico-streamdeck
This project is an OBS Controller using a Raspberry Pi Pico and CircuitPython.
27 parts230MIT - 2 layers186 × 45 mm
AddOnD
freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth
27 parts226CC-BY-SA-4.0