Route

prompt2device

The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.

The Crow carrier + pod public design package provides native designs and fabrication exports for the 5-carrier/10-pod prototype batch. It is a subset of the local sealed release, not order authorization.

Prompt to device: give an agent a plain-language hardware brief, work through explicit design, review, and physical-test cycles, and finish with the artifacts needed to manufacture the device—not merely a plausible CAD image.

Quick start

1. Give the PCB skill a brief

/pcb-design 3S LiPo input → 4× USB-A outputs at 5 V / 1.5 A each + 1× USB-C output at 5 V / 5 A.

2. See fabricated examples

These two projects show the path from a plain-English request to electrical CAD, mechanical CAD, and fabricated hardware. The prompt cells preserve the compact original wording; the links retain the corresponding design-lineage records. Photographs are bench evidence, not production-qualification claims. Exact provenance and claim limits are in fabricated-examples.md.

	Pluto eight-way fast switch	3S LiPo USB power board
Prompt	“we want a high speed 8 antenna switching board that can be programmed by the rpi4 and run with a pluto+”	“Please from scratch start a new project, and lets design a board that takes 3S lipo XT60 power as input , and outputs 3 x USB A ports (2.5A max) and 1 x USB C port (6A max).”
PCB rendering
Enclosure rendering
Fabricated board
Board in enclosure
Bench setup

pluto-rx2-8way-v5 is the fabricated eight-way RF switch board. Its immutable PCB design archive is v0.2.1-2026-08-14, with a sealed 3D PCB render, and its independently versioned v0.8.0-2026-08-28 enclosure has a corresponding installed-assembly render. That enclosure remains an honest INCOMPLETE candidate pending sliced and printed fit, retention, connector-service, and thermal tests. The PCB archive itself predates fabrication and still records DO-NOT-ORDER; RF first-article measurements remain open. The current human-readable engineering study is RF isolation, leakage paths, and a v6 mitigation strategy.

usb-hub-3s-v3 is the closest existing hardware to the quick-start brief: three USB-A outputs and one USB-C output rather than four USB-A outputs. Its latest sealed and fabricated archive is v1.12-2026-07-28. The bring-up journal records physical v1.12 boards and the replacement assembly's successful no-load regulation checks; full load, transient, and thermal qualification is still open.

The exact v1.12 board also has an independently versioned v0.4.0-2026-08-28 enclosure with a corresponding installed-assembly render. Its authored source and replay instructions remain mutable, while the release is an immutable INCOMPLETE candidate: structural and collision screens pass, but printed fit, connector service, retention, and thermal evidence remain open.

3. Follow the prompt-to-device loop

plain-language brief
  → fact locks and architecture
  → schematic, placement, routing, and enclosure development
  ↺ independent review, correction, regeneration, and measurement
  → sealed fabrication and mechanical artifacts
  → first article, physical findings, and the next development cycle

Today the governed output can include:

• native KiCad schematics and a rendered schematic PDF;
• the routed KiCad PCB plus Gerbers, drill files, BOM, and CPL for fabrication;
• top, bottom, and 3D PCB renders plus a STEP assembly;
• when mechanical work is selected, enclosure source, printable STLs, assembly renders, and clearance evidence; and
• governed Markdown investigations under each project's 01_docs/reports/.

The pipeline already uses board-level CAD/assembly twins as verification instruments. Governed firmware releases and an integrated product-level digital twin are forward work, tracked by IMP-234 and IMP-236.

What this repository is

prompt2device is a code-first prompt-to-device engineering system. It turns a user brief into generated KiCad source, bounded routing candidates, independently graded fabrication evidence, immutable releases, printable enclosures, and measured first-article records.

The product is the workflow under skills/. Boards under projects/ are its active applications; sealed release folders are immutable evidence, not templates to copy.

Manual commissioning

Clone the repository, create a branch, and save the user's original request as a UTF-8 text file:

git clone https://github.com/misko/prompt2device.git
cd prompt2device
git switch -c codex/my-board

Create the governed project scaffold and choose its capability profile:

python3 skills/pcb-design/scripts/commission_project.py my-board \
  --brief-file /path/to/original-brief.txt \
  --signal-integrity ordinary \
  --assembly jlcpcb \
  --firmware forbidden \
  --target design

Use high_speed_digital for USB and similar controlled digital links. Use rf only when the board intentionally carries RF/microwave signals. Add --foreign-mating when the floorplan consumes geometry from third-party hardware. Run the command with --help for enclosure and target options. Here --assembly jlcpcb selects the populated JLCPCB PCBA evidence path, not merely bare-board fabrication.

The command reports PCB-SCAFFOLD OK and leaves PCB-COMMISSION explicitly INCOMPLETE. It preserves the prompt and creates an executable commission hold; it does not accept requirements, adopt the seeded schema examples, or run a board producer.

Inspect the selected lifecycle before spending engineering time:

python3 skills/pcb-design/scripts/skill_reference_router.py \
  --profile projects/my-board/01_docs/capability-profile.json \
  --at-stage PCB-COMMISSION \
  --json

Then give Codex this instruction:

Read and follow skills/pcb-design/SKILL.md for projects/my-board. Preserve the
original brief, close the commission fact locks, and stop at the first evidence
or operator checkpoint. Do not create firmware unless the brief explicitly
asks.

Do not run rebuild_all.sh yet. The scaffold contains visible schema examples and 01_docs/COMMISSIONING-HOLD.md; both rebuild conductors refuse to run until the commission boundary is reviewed and that marker is deliberately removed.

Start with skills/pcb-design/SKILL.md. Its canonical lifecycle and runnable command map is execution-graph.md.

How execution is structured

The repository deliberately separates three layers:

capability profile
  -> disclosure graph (what stages/references are selected)
  -> project conductor (what bounded commands actually run)
  -> owning gates (what exact subjects passed)
  -> review/seal/publication/physical claims

• The router is planning only. Its output is never execution evidence.
• projects/<name>/03_src/rebuild_all.sh is the full source/schematic conductor. It intentionally pauses at review and operator checkpoints.
• rebuild_reuse.sh is the deterministic route-authority replay when the schematic is unchanged; route.yaml selects the authenticated source.
• Fresh route exploration is a separate candidate workflow; canonical rebuild replays the authenticated route source selected by route.yaml.
• Layout seal, PCB release seal, publication, ordering, and first article are different claims with different owners.

The declarative lifecycle is:

commission -> architecture -> sourcing
  -> schematic -> placement -> routing -> layout seal
  -> fabrication -> assembly verification
  -> release review -> release seal
  -> publication | first article -> production

RF context/source/realized/fabrication stages and foreign-mating import are conditional branches. High-speed digital composes inside the ordinary stages. Enclosures have an implemented parallel INCOMPLETE-candidate release stream and may bind an unchanged PCB release without resealing it. Higher readiness still requires the enclosure skill's recomputable CAD and physical evidence. Firmware is currently an explicit handoff, not a governed release stream; IMP-234 tracks that missing boundary.

Skills and authority

Authority is singular. A skill links to another owner's procedure rather than copying it. Project contracts.md files own exact artifact membership. Script --help text owns exact flags. improvements.md tracks work and rationale but never overrides an executable gate or accepted ADR.

Repository map

See docs/README.md for the documentation authority map.

Design model

The board is generated from committed human-owned source:

• TSX/tscircuit is the standard schematic authoring front end.
• Shared scripts convert the circuit, generate KiCad geometry/rules, and grade exact identities. Per-board source is configuration, not a copied backend.
• KiCad's Python API owns geometry and saves; kicad-cli owns headless ERC/DRC/netlist/export checks.
• Routing operates on immutable candidates. Only a clean, independently graded candidate can become the promoted route chain.
• Generated 04_kicad/ is a mutable current snapshot and is never hand-source authority. Immutable history lives under release streams.

This makes design changes diffable and rebuildable. It also means a generator defect can become a physical defect, so freshness, parity, nonzero coverage, registered models, and independent review are first-class gates.

Claims and releases

A release is an immutable reviewed candidate archive. It is not automatically an order event. A design can be electrically sound and sealed while remaining DO-NOT-ORDER because stock, uploader selections, physical fit, or first- article evidence is owed.

PCB and enclosure versions are independent streams. Current enclosure release tooling publishes immutable INCOMPLETE candidates bound to one exact PCB release without forcing that PCB to be resealed; it does not yet publish a higher readiness claim from caller-supplied scope status. A future firmware stream, exact product lock, and integrated product-level digital twin remain tracked work, not current release authority.

Toolchain

Core documentation and planning use normal Python 3. KiCad operations require the KiCad-bundled Python where import pcbnew succeeds plus kicad-cli. TSX generation requires the pinned tscircuit/Bun environment. Fresh routing requires the configured KiCadRoutingTools installation; replaying a selected authenticated route authority does not.

Python entry points expose --help; shell-conductor forms are documented in the execution graph. Use the owning current command rather than copying an old invocation from a project journal.

Validate a workflow change

At minimum:

python3 skills/pcb-design/scripts/skill_authority_check.py
python3 tests/t1_skill_progressive_disclosure.py
python3 tests/t1_pcb_documentation.py
python3 scripts/contracts_audit.py --walk --root skills/pcb-design

Run the domain suites affected by the change, then commit at a green boundary.

License

Except where otherwise noted, all original content in this repository is licensed under the MIT License. This includes software, documentation, prompts, schematics, PCB layouts, mechanical CAD files, and generated design artifacts.

Third-party materials remain subject to their respective copyright and license terms and are not relicensed by this repository.

See third-party notices for material provenance and contribution guidelines for new submissions.