misaaaaaa/al-vientopcb para máquina generadora de campos intensivos
Al viento is an open-source printed circuit board by misaaaaaa, from the misaaaaaa/al-viento repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 65 mm with 51 parts on 43 nets, routed with 332 tracks and 28 vias.
It is built around the L298N, L7805 and PN2222A. Its parts include 11 diodes, 10 resistors, 7 capacitors, 7 connectors and 3 ICs.
pcb para máquina generadora de campos intensivos
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4, R5, R6, R7, R8, R9, R10 |
| 5 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D4, D5, D6, D7 |
| 4 | 10u | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C1, C3, C5, C6 |
| 4 | LED | LIBRERIAS:LED_PCBasDiffuser | D8, D9, D10, D11 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 100k | Potentiometer_THT:Potentiometer_Bourns_PTV09A-1_Single_Vertical | RV1, RV2, RV3 |
| 3 | SW_SPDT | SWITCHES:SPST_ALIEXPRESS | SW1, SW2, SW3 |
| 2 | 100n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C4, C7 |
| 2 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D2, D3 |
| 2 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Horizontal | J1, J3 |
| 2 | JUMP3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7, J8 |
| 2 | LDR | OptoDevice:R_LDR_5.0x4.1mm_P3mm_Vertical | R1, R2 |
| 1 | 100u | Capacitor_THT:CP_Radial_D8.0mm_P3.80mm | C2 |
| 1 | 40106 | Package_DIP:DIP-14_W7.62mm_LongPads | U1 |
| 1 | JUMP2 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | JUMP6 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | L298N | Package_TO_SOT_THT:TO-220-15_P2.54x5.08mm_StaggerOdd_Lead4.58mm_Vertical | U4 |
| 1 | L7805 | Package_TO_SOT_SMD:TO-252-2 | U2 |
| 1 | PN2222A | Package_TO_SOT_THT:TO-92_Inline_Wide | Q1 |
| 1 | T_BLOCK | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J2 |
The 49 most common of 51 parts.
It measures 100 × 65 mm and has 2 copper layers, 1.6 mm thick.
51 parts, built around the L298N, L7805 and PN2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the misaaaaaa/al-viento repository on GitHub, at the commit this page was made from: the board is al-viento.kicad_pcb and its schematic al-viento.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
akhil053/L298-Motor-Driver
This project focuses on the design of a DC motor driver PCB using the L298N motor driver IC. The schematic and PCB layout were developed in KiCad with proper component placement, routing, and net labeling.
hurryharii/kicad-pcb-learning-project
A work-in-progress PCB designed using KiCad, featuring a 7805 voltage regulator, 1N4007 diodes, capacitors, motor connectors, and test points.
Mahfuz-Sarker136/L298N-Motor-driver-PCB-layout-with-Kicad
A custom, dual-layer L298N Motor Driver PCB module optimized for Robotics,Arduino or ESP-32 project
Omar-Hany00/ESP32-Robotic-Arm-Car
Custom ESP32-based RC robotic arm car with integrated PCB, motor control, and servo actuation.