

ADR1399
Kicad workspace /sandbox
- Size
- 107.5 × 55.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 96
- Nets
- 49
- Pads
- 235
- Tracks, vias
- 529, 39
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 11 Jan 2025
- Updated
- 18 Apr 2026
Overview
ADR1399 is an open-source printed circuit board by mirtcho, from the mirtcho/Kicad repository on GitHub. It is a 4-layer board of 107.5 × 55.5 mm with 96 parts on 49 nets, routed with 529 tracks and 39 vias.
It is built around the BC817, NOMCT16031002AT1 and PT100, with the SZSMF4L12AT3G among its other parts. Its parts include 31 capacitors, 28 resistors, 11 connectors, 8 ICs and 4 diodes.
Main components
4BC817
SOT-231 NPN 100nA 150MHz 300mW 40 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)NOMCT16031002AT1
SOIC-16100mW 10kΩ 16 8 ±0.1% ±25ppm/℃ SOIC-16 Resistor Networks, Arrays ROHSVishay IntertechnologyResistor Networks & ArraysPT100
--Production Auxiliary MaterialsThermostatSZSMF4L12AT3G
SOD-123FLSOD-123FL ESD and Surge Protection (TVS/ESD) ROHSLittelfuseUncategorised
Parts
96| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C6, C8, C9, C13, C16, C17, C25 |
| 7 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C20, C21, C22, C23, C24, C30, C31 |
| 4 | 1N4001 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4 |
| 4 | 220k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R19, R22, R25 |
| 4 | 3mm | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 4 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J6, J7, J8, J9 |
| 3 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R15, R21 |
| 3 | 1n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C11, C12 |
| 3 | 220.0 | Capacitor_THT:CP_Radial_D10.0mm_P7.50mm | C18, C26, C27 |
| 3 | 4k7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R18, R23 |
| 3 | OPA2182xD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U3, U8 |
| 2 | 1.0 | Capacitor_THT:C_Rect_L7.2mm_W5.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C3, C10 |
| 2 | 100.0 | Capacitor_Tantalum_SMD:CP_EIA-3528-12_Kemet-T_HandSolder | C19, C28 |
| 2 | 22k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R17 |
| 2 | 33 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R13 |
| 2 | 3k3 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R12 |
| 2 | 51 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R26, R28 |
| 2 | NetTie_2 | NetTie:NetTie-2_SMD_Pad2.0mm | NT1, NT2 |
| 1 | 100 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | C29 |
| 1 | 100K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 100p | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C15 |
| 1 | 10V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14 |
| 1 | 1n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5 |
| 1 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 2k7/910 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | 3 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R9 |
| 1 | 330n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C7 |
| 1 | 3k3/5k | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm | JP1 |
| 1 | 47k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R24 |
| 1 | 51k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R27 |
| 1 | 7V | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | 8k33/10k | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm | JP2 |
| 1 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Conn_01x01 | Connector_Wire:SolderWire-1sqmm_1x01_D1.4mm_OD3.9mm | J11 |
| 1 | Conn_01x01_Male | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | J10 |
| 1 | DNP | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20 |
| 1 | DNP | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C14 |
| 1 | GNDF_SPARE | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Guards | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J4 |
| 1 | LM399 | Package_TO_SOT_THT:Analog_TO-46-4_ThermalShield | U4 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U7 |
| 1 | LM7815_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U6 |
| 1 | LM7905_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U5 |
| 1 | NOMCT16031002AT1 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | R11 |
| 1 | NetTie_3 | Jumper:SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm_NumberLabels | NT3 |
| 1 | OPA2209xD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | PT100 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | PT1000 | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | TH1 |
| 1 | SZSMF4L12AT3G | TVS:ZDO_TPSMF4L5.0A_LTF-L | CR2 |
| 1 | SZSMF4L6.5AT3G | TVS:ZDO_TPSMF4L5.0A_LTF-L | CR1 |
| 1 | SZSMF4L8.5AT3G | TVS:ZDO_TPSMF4L5.0A_LTF-L | CR3 |
More from mirtcho/Kicad
2- 4 layers107.5 × 55.5 mm

- 2 layers

Similar boards
- 4 layers58 × 135 mm

Oculink to pcie adapter
antmicro/oculink-pcie-adapter
PCB design which converts an OCuLink connector into x16 PCIe slot
165 parts22Apache-2.0 - 2 layers60 × 35 mm

RibbonCable MB BreakdownBoard
darknode/cr-10s-pro-mods
Hardware modifications for CR-10S Pro 3D printer
18 parts16 - 4 layers53 × 40 mm

- 2 layers57.2 × 57.2 mm

- 2 layers94.5 × 89.4 mm

- 2 layers76.2 × 54 mm

EUPLA CONE CORE V1.1.0
PineConeMechatronics/EUPLA_CONE_CORE
Academic hardware development for the EUPLA_CONE_CORE project, including manufacturing files and sensor testing scripts.
99 parts1CERN-OHL-P-2.0 - 2 layers86 × 65 mm

- 2 layers

Questions
How big is the ADR1399 PCB?
It measures 107.5 × 55.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the ADR1399 use?
96 parts, built around the BC817, NOMCT16031002AT1, PT100 and SZSMF4L12AT3G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ADR1399 KiCad files?
From the mirtcho/Kicad repository on GitHub, at the commit this page was made from: the board is ADR1399New/ADR1399.kicad_pcb and its schematic ADR1399/ADR1399.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ADR1399 design in my own project?
Its repository states no licence, so its author keeps all rights: ask mirtcho before reusing the design.