

Stm8s triac contoller panel
- Size
- 94.5 × 89.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 264
- Nets
- 32
- Pads
- 708
- Tracks, vias
- 1,956, 60
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 8 Jun 2016
- Updated
- 12 May 2017
Overview
Stm8s triac contoller panel is an open-source printed circuit board by hwwong, from the hwwong/stm8s-triac-controller repository on GitHub, published under the MIT licence. It is a 2-layer board of 94.5 × 89.4 mm with 264 parts on 32 nets, routed with 1,956 tracks and 60 vias.
It is built around the STM8S003F3P6, EL357N-G and BC847, with the LL4148 and PT100 among its other parts. Its parts include 96 resistors, 48 capacitors, 48 connectors, 24 ICs and 18 diodes. It belongs with the STM8 boards of this library.
Main components
5STM8S003F3P6
TSSOP-20-40℃~+85℃ 10bit 128Byte 16 16MHz 1KB 2.95V~5.5V 8 Bit 8KB Built-in FLASH STM8 TSSOP-20 Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)EL357N-G
SOP-4_L4.4-W4.1-P2.54-LS7.0SOP-4-2.54mm New Arrivals ROHSEverlight ElectronicsUncategorisedBC847
SOT-231 NPN 100MHz 100mA 100nA 110 200mW 45V 500mV 6V NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)LL4148
LL-341 Independent 1V@10mA 200mA 4A 4ns 500mW 5uA@75V 75V LL-34 Switching Diodes ROHSMDDSwitching DiodesPT100
--Production Auxiliary MaterialsThermostat
Parts
264| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 100 | Resistors_SMD:R_0805 | R1, R1, R1, R1, R1, R1, R2, R2, R2, R2, R2, R2, R3, R3, R3, R3 +8 |
| 24 | 100nF | Capacitors_SMD:C_0805 | C2, C2, C2, C2, C2, C2, C3, C3, C3, C3, C3, C3, C5, C5, C5, C5 +8 |
| 18 | 1K | Resistors_SMD:R_0805 | R4, R4, R4, R4, R4, R4, R7, R7, R7, R7, R7, R7, R8, R8, R8, R8 +2 |
| 12 | 4.7K | Resistors_SMD:R_0805 | R13, R13, R13, R13, R13, R13, R16, R16, R16, R16, R16, R16 |
| 12 | 560 | Resistors_SMD:R_0805 | R6, R6, R6, R6, R6, R6, R9, R9, R9, R9, R9, R9 |
| 12 | EL357N | Opto-Devices:Optocoupler_SMD_HandSoldering_KPC357_LTV35x_PC357_SingleChannel | U1, U1, U1, U1, U1, U1, U2, U2, U2, U2, U2, U2 |
| 12 | NEUTRAL | Wire_Pads:SolderWirePad_single_1-2mmDrill | P4, P4, P4, P4, P4, P4, P5, P5, P5, P5, P5, P5 |
| 6 | +5V Power | Pin_Headers:Pin_Header_Straight_1x02 | P6, P6, P6, P6, P6, P6 |
| 6 | 100K | Resistors_SMD:R_0805 | R11, R11, R11, R11, R11, R11 |
| 6 | 100pF | Capacitors_SMD:C_0805 | C6, C6, C6, C6, C6, C6 |
| 6 | 2.7K | Resistors_SMD:R_0805 | R10, R10, R10, R10, R10, R10 |
| 6 | 330K/0.5W | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R15, R15, R15, R15, R15, R15 |
| 6 | 47 | Resistors_SMD:R_0805 | R14, R14, R14, R14, R14, R14 |
| 6 | 470/1W | Resistors_ThroughHole:Resistor_Vertical_RM5mm | R12, R12, R12, R12, R12, R12 |
| 6 | 470nF | Capacitors_SMD:C_0805 | C1, C1, C1, C1, C1, C1 |
| 6 | 470nF/400V | Capacitors_ThroughHole:C_Rect_L18_W11_H19_P15 | C4, C4, C4, C4, C4, C4 |
| 6 | 470uF/16V | Capacitors_ThroughHole:C_Radial_D8_L11.5_P3.5 | C7, C7, C7, C7, C7, C7 |
| 6 | 5.6V/0.5W | MyOwn:SOD-80 | D2, D2, D2, D2, D2, D2 |
| 6 | BC847 | TO_SOT_Packages_SMD:SOT-23 | Q2, Q2, Q2, Q2, Q2, Q2 |
| 6 | IR-Receiver | adafruit:PNA460XM | Q1, Q1, Q1, Q1, Q1, Q1 |
| 6 | Key1 | SparkFun-Electromechanical:TACTILE-PTH | SW1, SW1, SW1, SW1, SW1, SW1 |
| 6 | Key2 | SparkFun-Electromechanical:TACTILE-PTH | SW2, SW2, SW2, SW2, SW2, SW2 |
| 6 | LIVE | Wire_Pads:SolderWirePad_single_1-2mmDrill | P3, P3, P3, P3, P3, P3 |
| 6 | LL4148 | MyOwn:SOD-80 | D3, D3, D3, D3, D3, D3 |
| 6 | LOAD | Wire_Pads:SolderWirePad_single_1-2mmDrill | P2, P2, P2, P2, P2, P2 |
| 6 | Led_Small | LEDs:LED-3MM | D1, D1, D1, D1, D1, D1 |
| 6 | PT100 | Terminal_Blocks:TerminalBlock_Pheonix_MKDS1.5-3pol | TH1, TH1, TH1, TH1, TH1, TH1 |
| 6 | ST-Link-V2 | Pin_Headers:Pin_Header_Straight_1x04 | J1, J1, J1, J1, J1, J1 |
| 6 | STM8S003F3P | Housings_SSOP:TSSOP-20_4.4x6.5mm_Pitch0.65mm | IC1, IC1, IC1, IC1, IC1, IC1 |
| 6 | Solder-Jumper-2 | SparkFun-Passives:PAD-JUMPER-2-NO_YES_SILK | J2, J2, J2, J2, J2, J2 |
| 6 | TRIAC T435-600T1 | TO_SOT_Packages_THT:TO-220_Neutral123_Vertical_LargePads | U3, U3, U3, U3, U3, U3 |
| 6 | UART | Pin_Headers:Pin_Header_Straight_1x04 | P1, P1, P1, P1, P1, P1 |
More from hwwong/stm8s-triac-controller
1- 2 layers31.5 × 44.7 mm

Similar boards
- 2 layers212.5 × 79.1 mm

- 2 layers148.3 × 69 mm

- 2 layers30 × 13.7 mm

PTT USB Cable
UT8IFG/PTT-USB-Cable
A simple galvanically isolated USB-PTT interface for amateur radio equipment
25 parts2MIT - 2 layers90 × 54 mm

Test 09. With ESP module
henkjannl/RoomThermostat
Opentherm room thermostat that can be controlled through Telegram, but also locally
66 parts1MIT - 2 layers100 × 100 mm

Smart air
meeTeam05/smart-air
Devices provision over BLE, publish telemetry/shadow over MQTT, and serve the app through a Cloudflare-fronted Fastify API. See Features below for the full breakdown.
70 parts1MIT - 2 layers99.4 × 99.3 mm

IoT2526 HK2
Chethien1912/IoT-Environmental-Monitoring-System
ESP32-based IoT environmental monitoring project semester 2 2025-2026 HCMUTE
78 partsMIT - 2 layers108.8 × 157 mm

1. Mainboard
DangKhoa2210/Digital-Microfluidics
This repository contains the design files, firmware, and documentation for a Digital Microfluidic (DMF) platform, developed for research in droplet manipulation and potential applications such as on-chip PCR…
237 partsAGPL-3.0 - 4 layers61.8 × 85.7 mm

Questions
How big is the Stm8s triac contoller panel PCB?
It measures 94.5 × 89.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Stm8s triac contoller panel use?
264 parts, built around the STM8S003F3P6, EL357N-G, BC847 and LL4148. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Stm8s triac contoller panel KiCad files?
From the hwwong/stm8s-triac-controller repository on GitHub, at the commit this page was made from: the board is stm8s-triac-contoller-panel.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Stm8s triac contoller panel design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).