4 layers61.8 × 100 mm
Vm013-analog section
mirdej/vmix
Multichannel modular analog PAL video mixer based on the SYNKIE project
205 parts21
4 layers130 × 105 mm
Vm101-inout
mirdej/vmix21Multichannel modular analog PAL video mixer based on the SYNKIE project
- Size
- 130 × 105 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 238
- Nets
- 157
- Pads
- 731
- Tracks, vias
- 2,401, 244
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 20 Aug 2020
- Updated
- 5 Dec 2024
Overview
Vm101-inout is an open-source printed circuit board by mirdej, from the mirdej/vmix repository on GitHub. It is a 4-layer board of 130 × 105 mm with 238 parts on 157 nets, routed with 2,401 tracks and 244 vias.
It is built around the ATTINY85-20SU, LMH6643MM and MAX4392ESA+, with the MAX5741EUB+, BAT54S and BAT54 among its other parts. Its parts include 105 resistors, 64 capacitors, 23 ICs, 16 connectors and 8 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
8
ATTINY85-20SU
SOIC-8-208mil-40℃~+85℃ 10bit 2.7V~5.5V 20MHz 512Byte 512Byte 6 8 Bit 8KB AVR Built-in FLASH SOIC-8-208mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
LMH6643MM
VSSOP-8-40℃~+85℃ 1.5uA 130MHz 130V/us 145mA 17nV/√Hz@100kHz 2 2.7V~12.8V 2.7mA 20nA 3.4mV 5uV/℃ 95dB Rail-to-rail output VSSOP-8 Operational Amplifier ROHSTexas InstrumentsOperational Amplifier
MAX4392ESA+
SOIC-82 500V/us 6mA 85MHz SOIC-8 Operational Amplifier ROHSMaxim Integrated (Analog Devices)Video Amplifiers
MAX5741EUB+
uMAX-10-40℃~+85℃ 0.5LSB 10 2.7V~5.5V 4 500ns Integrated buffer、Power-on reset、Power-down mode、Bipolar output SPI、QSPI、MICROWIRE Voltage Buffer uMAX-10 Digital to Analog Converters (DAC) ROHSMaxim Integrated (Analog Devices)Digital To Analog Converters (DAC)
BAT54S
SOT-231 Pair Series Connection 1V@100mA 200mA 2uA@25V 30V 600mA SOT-23 Schottky Diodes ROHSMDDSchottky DiodesBAT54
SOT-23200mA 2uA@25V 30V 800mV@100mA Independent SOT-23 Schottky Diodes ROHSFOSANSchottky Diodes
PEMX1
SOT-666-6100MHz 100mA 100nA 120 200mV 300mW 40V NPN SOT-666-6 Bipolar (BJT) ROHSNexperiaBipolar (BJT)
PMBT3906YS
TSSOP-6(SOT-363)-55℃~+150℃ 100 165mV 2 PNP 200mA 250MHz 350mW 40V 50nA 6V PNP TSSOP-6(SOT-363) Bipolar (BJT) ROHSNexperiaBipolar (BJT)
README
README.mdANYMIX 21
Multichannel modular analog PAL video mixer based on the SYNKIE project
The Anymix21 is a 12 channel analog video mixer based on the paradigm of classic audio mixing desks.
Each channel is a complete SYNKIE by itself, sort of. It can handle anything from DC to around 10Mhz, this means you can mix CV signals with audio with PAL composite video signals. Contrary to an audio mixer, inputs are DC coupled, with 0v being black and 0.7V white level. Negative levels are permitted but will be clipped at the final output stage.
Each channel has a built-in equaliser, switchable edges (bandpass), comparator and inverter effects, and a scale-bias module for adjusting brightness and contrast. The signal can then be routed to 3 main output mix busses and an auxiliary output.
Apart from the equalizer, the effects and mix levels are digitally controlled analog, so parameters can be recorded, automated, or controlled externally through MIDI. The desk can be synchronized to a MIDI clock (which is then quantized to the vertical blanking interval derived from the genlock input).
Still under construction, the first 6 channels have passed their endurance test running daily for weeks at the exhibiton “H.o.Me. – Heim für obsolete Medien” at Kunsthaus Langenthal.
Documentation
- Architecture Overview
- Mixer Channel: Flowchart and description
- Master Section: Flowchart and description
Links
Parts
238| Qty | Value | Footprint | References |
|---|---|---|---|
| 35 | 100n | synkie_footprints:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C101, C102, C107, C108, C303, C304, C305, C306, C307, C308, C404, C405, C1001, C1005, C1007, C1008 +19 |
| 13 | 75 | synkie_footprints:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R101, R104, R107, R110, R301, R302, R303, R304, R306, R310, R312, R506, R508 |
| 12 | 100 | synkie_footprints:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R706, R707, R715, R806, R807, R815, R906, R907, R915, R1006, R1007, R1015 |
| 12 | 3k | synkie_footprints:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R704, R710, R711, R804, R810, R811, R904, R910, R911, R1004, R1010, R1011 |
| 10 | 220 | synkie_footprints:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R102, R103, R105, R106, R108, R109, R408, R409, R410, R411 |
| 9 | 1u | synkie_footprints:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C301, C703, C706, C803, C806, C903, C906, C1003, C1006 |
| 9 | 3k3 | synkie_footprints:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R305, R307, R308, R309, R501, R503, R504, R505, R507 |
| 8 | 12K | synkie_footprints:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R713, R716, R813, R816, R913, R916, R1013, R1016 |
| 8 | 1k | synkie_footprints:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R701, R709, R801, R809, R901, R909, R1001, R1009 |
| 8 | 4u7 | synkie_footprints:CP_EIA-3528-21_Kemet-B_Pad1.50x2.35mm_HandSolder | C702, C704, C802, C804, C902, C904, C1002, C1004 |
| 8 | LMH6643 | synkie_footprints:SOIC-8_3.9x4.9mm_P1.27mm | U301, U303, U402, U403, U702, U802, U902, U1002 |
| 6 | 120 | synkie_footprints:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R401, R405, R703, R803, R903, R1003 |
| 5 | 47k | synkie_footprints:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R407, R717, R817, R917, R1017 |
| 4 | 10u | synkie_footprints:CP_EIA-3528-21_Kemet-B_Pad1.50x2.35mm_HandSolder | C104, C105, C601, C603 |
| 4 | 20k | synkie_footprints:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R714, R814, R914, R1014 |
| 4 | 22k | synkie_footprints:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R718, R818, R918, R1018 |
| 4 | 2k2 | synkie_footprints:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R712, R812, R912, R1012 |
| 4 | 500 | Potentiometer_THT:Potentiometer_Bourns_3006P_Horizontal | RV701, RV801, RV901, RV1001 |
| 4 | BAT54S | synkie_footprints:SOT-23 | D701, D801, D901, D1001 |
| 4 | LT1228 | synkie_footprints:SOIC-8_3.9x4.9mm_P1.27mm | U701, U801, U901, U1001 |
| 4 | PNP | synkie_footprints:SOT-23_BEC | Q701, Q801, Q901, Q1001 |
| 3 | 300 | synkie_footprints:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R402, R406, R502 |
| 3 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad | H601, H602, H603 |
| 2 | 10p | synkie_footprints:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C402, C403 |
| 2 | 220u | Capacitor_SMD:CP_Elec_10x10.5 | C103, C106 |
| 2 | 330u | synkie_footprints:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | FB101, FB102 |
| 2 | 4053 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U302, U401 |
| 2 | BAT54S | Package_TO_SOT_SMD:SOT-23 | D301, D302 |
| 2 | C_Small | synkie_footprints:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C502, C503 |
| 2 | MAX4392 | synkie_footprints:SOIC-8_3.9x4.9mm_P1.27mm | U101, U102 |
| 2 | Polyfuse | Fuse:Fuse_0805_2012Metric | F101, F102 |
| 2 | TE_UMCC_2337019-1 | synkie_footprints:TE_UMCC_2337019-1 | J114, J115 |
| 1 | 0-Ohm | synkie_footprints:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C302 |
| 1 | 10k | synkie_footprints:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R313 |
| 1 | 1k6 | synkie_footprints:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
| 1 | 4k7 | synkie_footprints:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R403 |
| 1 | 560 | synkie_footprints:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R601 |
| 1 | 5k6 | synkie_footprints:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R404 |
| 1 | 680 | synkie_footprints:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | ADR510 | synkie_footprints:SOT-23 | U601 |
| 1 | ATtiny85-20SU | Package_SO:SOIJ-8_5.3x5.3mm_P1.27mm | U502 |
| 1 | AnymaISP | anyma_footprints:Pinhead_SMD_6 | U503 |
| 1 | BAT54 | Diode_SMD:D_SOT-23_ANK | D402 |
| 1 | Card-Edge_02x20_Odd_Even | Connector_PCBEdge:Samtec_MECF-20-0_-L-DV_2x20_P1.27mm_Polarized_Edge | J111 |
| 1 | Conn_01x03 | synkie_footprints:PinHeader_1x03_P2.54mm_Vertical | J113 |
| 1 | Conn_01x03 | synkie_footprints:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J601 |
| 1 | Conn_01x24_Shielded | Connector_FFC-FPC:Hirose_FH12-24S-0.5SH_1x24-1MP_P0.50mm_Horizontal | J104 |
| 1 | Conn_Coaxial | Connector_Coaxial:BNC_Amphenol_B6252HB-NPP3G-50_Horizontal | J101 |
| 1 | Controller-Power | synkie_footprints:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J110 |
| 1 | D | Diode_SMD:D_MiniMELF | D401 |
| 1 | EQ-Power | synkie_footprints:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J109 |
| 1 | Ferrit(flash levelmeter first) | synkie_footprints:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | FB501 |
| 1 | GENLOCK-OUT | Connector_Coaxial:BNC_Amphenol_B6252HB-NPP3G-50_Horizontal | J106 |
| 1 | Jumper | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP102 |
| 1 | Jumper | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP103 |
| 1 | Jumper_2_Open | synkie_footprints:PinHeader_1x02_P2.54mm_Vertical | JP101 |
| 1 | LOGO | anyma_footprints:logo_anyma | U1003 |
| 1 | LOGO | Symbol:OSHW-Logo2_7.3x6mm_SilkScreen | U1004 |
| 1 | MAX5741 | Package_SO:MSOP-10_3x3mm_P0.5mm | U602 |
| 1 | MONITOR_OUT | synkie_footprints:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J102 |
| 1 | Monitor-Power | synkie_footprints:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J108 |
| 1 | Opamp_Dual_Generic | synkie_footprints:SOIC-8_3.9x4.9mm_P1.27mm | U501 |
| 1 | PEMX1 | synkie_footprints:SOT-666 | Q402 |
| 1 | PFL-OUT | Connector_Coaxial:BNC_Amphenol_B6252HB-NPP3G-50_Horizontal | J105 |
| 1 | PMBT3906YS | synkie_footprints:SOT-363_SC-70-6_Handsoldering | Q401 |
| 1 | Power | synkie_footprints:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J112 |
| 1 | R_POT_Dual | synkie_footprints:RK12L123 | RV401 |
| 1 | To EQ | Connector_FFC-FPC:Hirose_FH12-24S-0.5SH_1x24-1MP_P0.50mm_Horizontal | J103 |
| 1 | don't | synkie_footprints:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C401 |
| 1 | don't | synkie_footprints:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R311 |
| 1 | gnd | synkie_footprints:Solderpad_1mm | J107 |
More from mirdej/vmix
12- 4 layers99 × 41.4 mm
Vm005-mix
mirdej/vmix
Multichannel modular analog PAL video mixer based on the SYNKIE project
144 parts21 - 4 layers58 × 71 mm
Vm113-effects
mirdej/vmix
Multichannel modular analog PAL video mixer based on the SYNKIE project
132 parts21 - 4 layers60.3 × 48 mm
Vm003-eq
mirdej/vmix
Multichannel modular analog PAL video mixer based on the SYNKIE project
114 parts21 - 2 layers59 × 154 mm
Vm124-masterpanel
mirdej/vmix
Multichannel modular analog PAL video mixer based on the SYNKIE project
105 parts21 - 4 layers53.1 × 113.2 mm
Vm129-cpu
mirdej/vmix
Multichannel modular analog PAL video mixer based on the SYNKIE project
98 parts21 - 2 layers25 × 94 mm
Vm120-output
mirdej/vmix
Multichannel modular analog PAL video mixer based on the SYNKIE project
82 parts21 - 4 layers44 × 93 mm
Vm020-output
mirdej/vmix
Multichannel modular analog PAL video mixer based on the SYNKIE project
80 parts21 - 4 layers49 × 59 mm
Vm001-input
mirdej/vmix
Multichannel modular analog PAL video mixer based on the SYNKIE project
78 parts21 - 2 layers97.8 × 72.6 mm
Vm009-cpu
mirdej/vmix
Multichannel modular analog PAL video mixer based on the SYNKIE project
75 parts21 - 2 layers56 × 160 mm
Vm122-masterfader
mirdej/vmix
Multichannel modular analog PAL video mixer based on the SYNKIE project
74 parts21 - 2 layers25 × 99.5 mm
Vm128-preview mux
mirdej/vmix
Multichannel modular analog PAL video mixer based on the SYNKIE project
74 parts21
Similar boards
- 4 layers45.8 × 69.5 mm
Microsynkie
mirdej/synkie
The Synkie is a modular open source analog video processor, developed by Michael Egger, Max Egger and Flo Kaufmann
84 parts47 - 2 layers49.3 × 47.5 mm
Ethernet
oguzhanbaser/GalvoScanner
Gazebo-Sim/ mytestpkg/ CMakeLists.txt (ROS paketi derleme tanımı) package.xml (ROS paket meta verisi) launch/cameragazebo.launch (Kamera modelini Gazebo’da başlatma) urdf/cameramodel.xacro (Parametrik kamera URDF/Xacro…
72 parts - 4 layers33 × 15.2 mm
- 2 layers101.3 × 106.2 mm
- 2 layers17.5 × 15 mm
LM1117-LDO TILE
pris-digital/ManhattanBreakoutBoards-Panelized
A collection of breakout boards for manhattan style prototyping
9 partsGPL-3.0 - 2 layers70.7 × 53.3 mm
- 2 layers130 × 90 mm
- 2 layers100 × 62.1 mm
Questions
How big is the Vm101-inout PCB?
It measures 130 × 105 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Vm101-inout use?
238 parts, built around the ATTINY85-20SU, LMH6643MM, MAX4392ESA+ and MAX5741EUB+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Vm101-inout KiCad files?
From the mirdej/vmix repository on GitHub, at the commit this page was made from: the board is electronics/vm101-inout/vm101-inout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Vm101-inout design in my own project?
Its repository states no licence, so its author keeps all rights: ask mirdej before reusing the design.