
12VSupport
svpetry/12VSupport
System to support a vehicle 12V electrical system with a LiIon battery to prevent the lead battery from depletion.

A Raspberry PI HAT for controlling power to your 3D printer
Printer HAT is an open-source printed circuit board by mikenorgate, from the mikenorgate/3d-printer-power-hat repository on GitHub. It is a 2-layer board of 65 × 56 mm with 38 parts on 52 nets, routed with 179 tracks and 87 vias.
It is built around the LM2596S-5.0, M2.5 and S8050, with the DMG2305UX-7, SK34 and SLA-05VDC-SL-C among its other parts. Its parts include 11 resistors, 8 diodes, 4 transistors, 3 ICs and 3 connectors. It belongs with the robots and motor control boards of this library.
IMPORTANT NOTE: Ensure the PCB thickness is no more than 1mm due to height constraints within the enclosure
| Reference | Value | Part Number | LCSC | Quantity |
|---|---|---|---|---|
| C1 | 470uF | OGPE1601H471MF | C269963 | 1 |
| C2 | 220uF | TAJD227K010RNJ | C8024 | 1 |
| D1 | SS54 | C22452 | 1 | |
| D3 | SK34 | C18895 | 1 | |
| D4-D6 | Green | 19-217/GHC-YR1S2/3T | C72043 | 3 |
| D2,D7,D8 | 1N4148W | C81598 | 3 | |
| J1 | DB128V-5.0-3P-BK-S | C424695 | 2 | |
| J4 | B-2100S03P-A110 | C124376 | 1 | |
| K1 | SRD-05VDC-SL-C | C35449 | 1 | |
| K2 | SLA-05VDC-SL-C | C87367 | 1 | |
| L1 | 47uH | SLO1040H470MTT | C182153 | 1 |
| P1 | C50982 | C50982 | 1 | |
| Q1, Q2 | S8050 | C2146 | 2 | |
| Q4 | DMMT5401-7-F | C154733 | 1 | |
| Q5 | DMG2305UX-7 | C150470 | 1 | |
| R2 | 47K | 0603WAF4702T5E | C25819 | 1 |
| R3-R5, R8-R11 | 1K | 0603WAF1001T5E | C21190 | 7 |
| R1, R6, R7 | 10K | 0603WAF1002T5E | C25804 | 3 |
| U1 | LM2596S-5 | C347421 | 1 | |
| U2, U3 | EL3H7 | C32565 | 2 |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 1K | Resistor_SMD:R_0603_1608Metric | R3, R4, R5, R8, R9, R10, R11 |
| 4 | M2.5 | MountingHole:MountingHole_2.7mm_M2.5_Pad | MK1, MK2, MK3, MK4 |
| 3 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R6, R7 |
| 3 | 1N4148 | Diode_SMD:D_MiniMELF | D2, D7, D8 |
| 3 | LED | LED_SMD:LED_0603_1608Metric | D4, D5, D6 |
| 2 | EL3H7 | Package_SO:SOP-4_4.4x2.6mm_P1.27mm | U2, U3 |
| 2 | S8050 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | 220uF | Capacitor_Tantalum_SMD:CP_EIA-7343-30_AVX-N | C2 |
| 1 | 470uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | 47K | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 47uH | Inductor_SMD:L_10.4x10.4_H4.8 | L1 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Conn_02x20_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | P1 |
| 1 | DMG2305UX-7 | Package_TO_SOT_SMD:SOT-23 | Q5 |
| 1 | LM2596S-5 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U1 |
| 1 | Q_Dual_PNP_PNP_C1B1B2C2E2E1 | Package_TO_SOT_SMD:SOT-23-6 | Q4 |
| 1 | SK34 | Diode_SMD:D_SMA | D3 |
| 1 | SLA-05VDC-SL-C | Library:SLA05VDCSLC | K2 |
| 1 | SRD-05VDC-SL-C | Library:SRD-05VDC-SL-C | K1 |
| 1 | SS54 | Diode_SMD:D_MiniMELF | D1 |
| 1 | Screw_Terminal | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type011_RT05506HBWC_1x06_P5.00mm_Horizontal | J1 |

svpetry/12VSupport
System to support a vehicle 12V electrical system with a LiIon battery to prevent the lead battery from depletion.

sarinsanyal/pcb-shems
This Smart Edge Node is an industrial/home energy monitoring and switching board that bridges high-voltage AC mains power with low-voltage microcontroller logic.

svpetry/TeslaBMBCheck
Simple device that reads the voltage levels and temperatures from a Tesla Model S BMB board.

hghaken/ESP-iRadio
ESP32 internet radio with Bluetooth A2DP output (headphones/speaker), 1.69" display and web control

NilsEngelbach/air-quality-pcb
Seventh iteration: ESP8266 → ESP32-C3 (native USB, no UART bridge), fixes from the v6 design review, right-angle switches with longer actuators, a STEMMA QT port for optional sensors, and charge-status sensing.

ICRS/101
The all-new open source Robotics 101 course from ICRS. It's specifically designed to be run in hackspaces, after school clubs and university societies.


collins-emasi/KiCAD-PROJECTS-PCB
In this repository, I will be sharing some of the project I'm working on with KiCAD software.
It measures 65 × 56 mm and has 2 copper layers, 1 mm thick.
38 parts, built around the LM2596S-5.0, M2.5, S8050 and DMG2305UX-7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mikenorgate/3d-printer-power-hat repository on GitHub, at the commit this page was made from: the board is pcb/Printer-HAT.kicad_pcb and its schematic pcb/Printer-HAT.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask mikenorgate before reusing the design.