2 layers40 × 111 mm
2 layers193 × 100 mm
Adaptadora
migueledvc/placaAdaptadoraPlaca adaptadora de señales
- Size
- 193 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 110
- Nets
- 78
- Pads
- 370
- Tracks, vias
- 682, 8
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 Sep 2019
- Updated
- 10 Dec 2019
Overview
Adaptadora is an open-source printed circuit board by migueledvc, from the migueledvc/placaAdaptadora repository on GitHub. It is a 2-layer board of 193 × 100 mm with 110 parts on 78 nets, routed with 682 tracks and 8 vias.
It is built around the SN74LVC2T45DCURE4 and 0.1UF 50V 5*11. Its parts include 30 capacitors, 20 connectors, 10 resistors, 10 ICs and 6 diodes.
Main components
2
SN74LVC2T45DCURE4
VSSOP-832mA 32mA Level translator Power-off protection、Output enable high-impedance VSSOP-8 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters0.1UF 50V 5*11
插件,5x11mm1000hrs@105℃ 100nF 11mm 1A@100kHz 2mm 50V 5mm 插件,5x11mm Aluminum Electrolytic Capacitors - Leaded ROHSCXAluminum Electrolytic Capacitors - Leaded
README
README.md#tp-dci--migueledvc
Placa adaptadora de señales de radar
-
El presente documento presenta la idea de un circuito adaptador de señales típicas de un radar.
-
No se especifica un modelo de radar en particular.
-
El circuíto es parte del desarrollo de un procesador de radar con tecnología FPGA-SoC. (ADC-SoC de Terasic)
-
Se utiliza para esta placa licencia "BSD 3-clause"
Parts
110| Qty | Value | Footprint | References |
|---|---|---|---|
| 23 | 0_1uF-50V | Capacitor_SMD:C_0805_2012Metric | C1, C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C22, C23, C24, C25 +7 |
| 16 | Conn_Coaxial | Connector_Coaxial:SMA_Amphenol_901-144_Vertical | J1, J2, J3, J4, J10, J11, J12, J13, J14, J15, J16, J17, J18, J19, J20, J22 |
| 10 | Jumper_3_Open | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8, JP9, JP10 |
| 10 | R_POT | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1, RV2, RV3, RV4, RV5, RV6, RV7, RV8, RV9, RV10 |
| 6 | 50 - 1/2W - 5% | Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R1, R2, R3, R4, R7, R8 |
| 6 | D_TVS | Diode_THT:D_DO-15_P10.16mm_Horizontal | D1, D2, D3, D4, D5, D6 |
| 5 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4, H5 |
| 5 | TestPoint | adaptadora:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP5, TP6, TP7, TP8, TP9 |
| 4 | 100 - 1/8W - 5% | Resistor_SMD:R_0805_2012Metric | R5, R6, R9, R10 |
| 4 | 1uF-16V | Resistor_SMD:R_1206_3216Metric | C8, C9, C20, C21 |
| 4 | LM361MX_NOPB | Package_DIP:DIP-14_W7.62mm_Socket | U11, U12, U13, U14 |
| 4 | TLV2772IDR | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U21, U22, U23, U25 |
| 4 | TestPoint | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP1, TP2, TP3, TP4 |
| 3 | 2_2uF-35V | Capacitor_Tantalum_SMD:CP_EIA-6032-28_Kemet-C | C3, C6, C7 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6, J9 |
| 2 | SN74LVC2T45DCUR | Package_SO:VSSOP-8_2.4x2.1mm_P0.5mm | U31, U32 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | Conn_02x06_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Horizontal | J5 |
Similar boards
- 6 layers190 × 140 mm
- 2 layers45 × 65 mm
AquaMQTT
tspopp/AquaMQTT
Monitor and control your Groupe Atlantic (Explorer, Calypso, Aquawin,...) heat pump using MQTT
16 parts71Apache-2.0 - 4 layers48.5 × 33.5 mm
- 2 layers220 × 300 mm
Transit
thebenedict/seattletransit-hardware
Schematic and PCB for a circuit board map of Seattle area public transit.
448 parts14CERN-OHL-W-2.0 - 4 layers82.7 × 77.8 mm
GlowCorePanel
LEDs-by-glowingkitty/GlowCore
The easiest way to control your DIY LED project.
472 parts6GPL-3.0 - 4 layers30 × 40 mm
GlowCoreMini PCB
LEDs-by-glowingkitty/GlowCore-Mini
A small PCB for controlling an LED strip via USB-C or DC power. WLED compatible and with an integrated microphone for sound reactive animations!
89 parts6GPL-3.0 - 2 layers27.9 × 34.3 mm
GlowBand PCB
LEDs-by-glowingkitty/GlowBand
GlowBand is an exciting LED wristband. For dancing at parties and festivals, for long-time exposure photography, and for everyday situations that need some light.
76 parts4MIT
Questions
How big is the Adaptadora PCB?
It measures 193 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Adaptadora use?
110 parts, built around the SN74LVC2T45DCURE4 and 0.1UF 50V 5*11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Adaptadora KiCad files?
From the migueledvc/placaAdaptadora repository on GitHub, at the commit this page was made from: the board is adaptadora/adaptadora.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Adaptadora design in my own project?
Its repository states no licence, so its author keeps all rights: ask migueledvc before reusing the design.