2 layers155.9 × 27 mm
GlowBand
LEDs-by-glowingkitty/GlowBand
GlowBand is an exciting LED wristband. For dancing at parties and festivals, for long-time exposure photography, and for everyday situations that need some light.
68 parts4MIT
2 layers27.9 × 34.3 mm
GlowBand PCB
LEDs-by-glowingkitty/GlowBand4GlowBand is an exciting LED wristband. For dancing at parties and festivals, for long-time exposure photography, and for everyday situations that need some light.
- Size
- 27.9 × 34.3 mm
- Copper layers
- 2
- Thickness
- 1.09 mm
- Parts
- 76
- Nets
- 78
- Pads
- 290
- Tracks, vias
- 0, 0
- Pours
- 1
- Routed
- Not yet
- KiCad
- KiCad 6 (file 20211014)
- Created
- 18 May 2020
- Updated
- 5 Feb 2023
Overview
GlowBand PCB is an open-source printed circuit board by LEDs-by-glowingkitty, from the LEDs-by-glowingkitty/GlowBand repository on GitHub, published under the MIT licence. It is a 2-layer board of 27.9 × 34.3 mm with 76 parts on 78 nets.
It is built around the ESP32-S3-MINI-1-N8, AP40P05 and AO3400A, with the LSM6DS3TR-C, MSM261D4030H1CPM and PTVSHC3N12VU among its other parts. Its parts include 20 connectors, 19 capacitors, 18 resistors, 13 ICs and 3 switches. It belongs with the ESP32 boards of this library.
Main components
12
ESP32-S3-MINI-1-N8
SMD-104.5dBm -40℃~+85℃ 2.4GHz 20.5dBm 330mA 3V~3.6V 97mA Bluetooth5.0 ESP32-S3FN8 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD WiFi Modules ROHSEspressif SystemsWiFi Modules
AP40P05
SOT-23-55℃~+150℃ 1 P-Channel 120mΩ@4.5V 14nC@10V 2.5V 2W 40V 596pF 5A 70pF 90pF SOT-23 MOSFETs ROHSALLPOWERMOSFETsAO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
LSM6DS3TR-C
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 16bit 3uA 4KB IMU (accelerometer + gyroscope) SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps 运动事件检测、同步与时间戳 LGA-14(2.5x3) Accelerometers ROHSSTMicroelectronicsAccelerometers
MSM261D4030H1CPM
OCLGA-8(3x4)-26dB、-25dB 1.8V 290uA、670uA 62dB、64dB Omnidirectional OCLGA-8(3x4) MEMS Microphones ROHSMEMSMEMS Microphones
PTVSHC3N12VU
DFN2x2-3L1 12V 14.5V 1nF 1uA 200A@8/20us 30V 5kW@8/20us IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 TVS DFN2x2-3L ESD and Surge Protection (TVS/ESD) ROHSShanghai Prisemi ElecESD And Surge Protection (TVS/ESD)SK9822-EC20
SMD,2x2mm-40℃~+80℃ 0.65mm 100mcd~300mcd 1mA 200V 2mm 2mm 300mcd~500mcd 4.5V~5.5V 400mcd~700mcd 460nm~470nm 4kHz 520nm~530nm 620nm~625nm Top-mount SMD,2x2mm RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
SN74LVC2T45DCURE4
VSSOP-832mA 32mA Level translator Power-off protection、Output enable high-impedance VSSOP-8 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
TS24CA
SMD,4.6x1.8mm-20℃~+70℃ 1.6N 1.9mm 12V 20 thousand cycles 3.5mm 4.7mm 50mA Black No Rectangular Button SMD(SMT) Tab SPST Surface Mount, Right Angle Without Bracket SMD,4.6x1.8mm Tactile Switches ROHSSHOU HANTactile Switches
RT9471DGQW
WQFN-24-EP(4x4)-40℃~+150℃ 1 15uA 2.6V 3.15A 3.9V~13.5V 4.2V Charging IC I2C Support WQFN-24-EP(4x4) Battery Management ROHSRichtek TechBattery Management
TS-1185EC-C-D-B
SMD,3.7x3mm-30℃~+85℃ 100,000 cycles 12V 2.6N 2mm 3.65mm 3mm 50mA Black No Round Button SPST Surface Mount,Vertical Without Bracket SMD,3.7x3mm Tactile Switches ROHSXKB ConnectionTactile Switches
WPN4020H1R0MT
SMD,4x4mm1uH 26mΩ 5.8A 8.7A ±20% SMD,4x4mm Power Inductors ROHSSunlordPower Inductors
README
archive/GlowBand v1.0/README.md
The first version of GlowBand based on a custom PCB design. In development.
Parts
76| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | Solder_Pad | footprint:Solder pad | P1, P2, P3, P4, P5, P10, P11, P12, P13, P14, P15, P16, P17, P18, P19, P20 +3 |
| 9 | 10uF | Capacitor_SMD:C_0603_1608Metric | C2, C4, C7, C8, C9, C11, C15, C16, C19 |
| 8 | 100K | Resistor_SMD:R_0402_1005Metric | R5, R6, R9, R10, R12, R14, R15, R17 |
| 6 | 10K | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R7, R8 |
| 5 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C10, C12, C13, C14, C17 |
| 3 | AP40P05 | footprint:SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR | U3, U5, U7 |
| 2 | TS24CA | footprint:SW-SMD_TS24CA | SW1, SW2 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C18 |
| 1 | 160K | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 220uF | Capacitor_SMD:C_1206_3216Metric | C3 |
| 1 | 33K | Resistor_SMD:R_0402_1005Metric | R16 |
| 1 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 47nF | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 5.1K | Resistor_SMD:R_0402_1005Metric | R18 |
| 1 | 62 | Resistor_SMD:R_0402_1005Metric | R13 |
| 1 | 74LVC2G04DW-7 | footprint:SOT-363_L2.0-W1.3-P0.65-LS2.1-BR | U13 |
| 1 | AO3400A | footprint:SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BR | U6 |
| 1 | ESP32-S3-MINI-1-N8 | footprint:ESP32-S3-MINI-1-N8 | U4 |
| 1 | LP803030 | footprint:LP803030 | B1 |
| 1 | LSM6DS3TR-C | footprint:LGA-14_L3.0-W2.5-P0.50-TL | U9 |
| 1 | MSM261D4030H1CPM | footprint:MIC-SMD_8P-L3.0-W4.0-P0.85-BL | U10 |
| 1 | Magnetic_Pogopin_4pin_female | footprint:Magnetic Pogopin 4pin female | P9 |
| 1 | PTVSHC3N12VU | footprint:DFN-3_L2.0-W2.0-P1.30-BR | U2 |
| 1 | RT9471DGQW | footprint:RT9471_vias_in_pad | REF1 |
| 1 | SK9822-EC20 | footprint:LED-SMD_6P-L2.0-W2.0-P0.80-TL | U12 |
| 1 | SN74LVC1G373DBVR | footprint:SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BR | U1 |
| 1 | SN74LVC2T45DCUR | footprint:VSSOP-8_L2.4-W2.1-P0.50-LS3.2-BR | U8 |
| 1 | SPX3819M5-L-3-3_TR | footprint:SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BR | U11 |
| 1 | TS-1185EC-C-D-B | footprint:SW-SMD_4P-L3.7-W3.0-P1.50-LS4.7 | SW3 |
| 1 | WPN4020H1R0MT | footprint:IND-SMD_L4.0-W4.0_SLW40XX | L1 |
More from LEDs-by-glowingkitty/GlowBand
3- 2 layers30.6 × 37.4 mm
GlowBandSmall
LEDs-by-glowingkitty/GlowBand
GlowBand is an exciting LED wristband. For dancing at parties and festivals, for long-time exposure photography, and for everyday situations that need some light.
52 parts4MIT - 2 layers26.8 × 15.4 mm
GlowBand Dock PCB
LEDs-by-glowingkitty/GlowBand
GlowBand is an exciting LED wristband. For dancing at parties and festivals, for long-time exposure photography, and for everyday situations that need some light.
14 parts4MIT
Similar boards
- 4 layers30 × 40 mm
GlowCoreMini PCB
LEDs-by-glowingkitty/GlowCore-Mini
A small PCB for controlling an LED strip via USB-C or DC power. WLED compatible and with an integrated microphone for sound reactive animations!
89 parts6GPL-3.0 - 2 layers169.5 × 83.5 mm
GlowSignMainPCB
LEDs-by-glowingkitty/GlowSign
A battery powered LED sign for your laptop, or where ever else you want to use it!
130 parts1GPL-3.0 - 4 layers58.5 × 120.9 mm
MainPCB
LEDs-by-glowingkitty/GlowTower
A beautiful looking LED lamp for lighting up your home or setting the right mood at house parties - with animations that can react to music.
155 parts9GPL-3.0 - 4 layers82.7 × 77.8 mm
GlowCorePanel
LEDs-by-glowingkitty/GlowCore
The easiest way to control your DIY LED project.
472 parts6GPL-3.0 - 8 layers76 × 65.1 mm
Ti135 card
johonkanen/efinix_soc_board
Efinix Ti135N484I3 Linux control card for the AC lab PSU baseboard (KiCad 10, scripted schematic)
410 parts - 4 layers78 × 78 mm
TiltBox Voice A
Tom-Michiels/TiltBox
A handheld retro game console with tilt controls, featuring 9 games on an 8x8 LED matrix. Designed at maakleerplek
165 parts - 2 layers35.4 × 25.6 mm
- 4 layers60 × 570 mm
Questions
How big is the GlowBand PCB PCB?
It measures 27.9 × 34.3 mm and has 2 copper layers, 1.09 mm thick.
What parts does the GlowBand PCB use?
76 parts, built around the ESP32-S3-MINI-1-N8, AP40P05, AO3400A and LSM6DS3TR-C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the GlowBand PCB KiCad files?
From the LEDs-by-glowingkitty/GlowBand repository on GitHub, at the commit this page was made from: the board is GlowBand PCB/GlowBand PCB.kicad_pcb and its schematic GlowBand Dock PCB/GlowBand Dock PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the GlowBand PCB design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).