

Motor bldc esc V1
- Size
- 94.3 × 95.7 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 117
- Nets
- 146
- Pads
- 533
- Tracks, vias
- 832, 210
- Pours
- 31
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 12 Aug 2026
- Updated
- 8 Aug 2026
Overview
Motor bldc esc V1 is an open-source printed circuit board by middelhauvephilipp-stack, from the middelhauvephilipp-stack/motor_control_pcb_design repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 4-layer board of 94.3 × 95.7 mm with 117 parts on 146 nets, routed with 832 tracks and 210 vias.
It is built around the STM32H523VET6, SN65HVD230DR and DRV8353SRTAT, with the TLV75533PDBVR-MS, USBLC6-2SC6 and BSC060N10NS3G among its other parts. Its parts include 50 capacitors, 34 resistors, 7 ICs, 6 diodes and 6 transistors. It belongs with the robots and motor control boards and the STM32 boards of this library.
Main components
8STM32H523VET6
LQFP-100(14x14)-40℃~+85℃ 1.71V~3.6V 250MHz 272KB 32 Bit 512KB 80 ARM Cortex-M33 Built-in+External FLASH LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)SN65HVD230DR
SOP-8CAN TransceiversTokmasDRV8353SRTAT
WQFN-40-EP(6x6)-40℃~+125℃ 1.5V 1A 20uA 2A 3 30ns 30ns 800mV 9V~100V Half-Bridge MOSFET Under Voltage Protection、Over Current Protection、Overtemperature protection (OTP) WQFN-40-EP(6x6) Gate Drivers ROHSTexas InstrumentsGate DriversTLV75533PDBVR-MS
SOT-23-5SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMSKSEMIUncategorisedUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)BSC060N10NS3G
TDSON-8(5x6)-55℃~+150℃ 1 N-channel 100V 125W 25pF 4.9nF 68nC@10V 6mΩ@10V 90A TDSON-8(5x6) MOSFETs ROHSInfineon TechnologiesMOSFETsPESD1CAN,215-ES
SOT-23ESD And Surge Protection (TVS/ESD)ElecSuperSMAJ60A
DO-214AC(SMA)ESD And Surge Protection (TVS/ESD)hongjiacheng
Parts
117| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C4, C11, C12, C14, C16, C17, C18, C19, C20, C21, C22, C34, C50 |
| 6 | 2 | Resistor_SMD:R_0603_1608Metric | R22, R23, R24, R25, R26, R27 |
| 6 | BSC060N10NS3G | Package_TO_SOT_SMD:TDSON-8-1 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 5 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C26, C27, C29, C38 |
| 5 | 10u | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | C36, C39, C40, C41, C42 |
| 5 | 2u2 | Capacitor_SMD:C_0603_1608Metric | C23, C24, C25, C35, C49 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R32, R33, R35 |
| 4 | 1u | Capacitor_SMD:C_0603_1608Metric | C30, C44, C45, C46 |
| 4 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C8, C9, C10 |
| 4 | 4.7u | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C28, C33, C43, C47 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 120 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7, R8 |
| 3 | 15m | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R3, R4, R5 |
| 3 | 330 | Resistor_SMD:R_0603_1608Metric | R17, R30, R31 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R28, R29 |
| 2 | 2n2 | Capacitor_SMD:C_0603_1608Metric | C37, C48 |
| 2 | 330u | MyLib:100ZLJ330M12.5X35 | C31, C32 |
| 2 | 33p | Capacitor_SMD:C_0603_1608Metric | C13, C15 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R18, R19 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12 |
| 1 | 10u | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C2 |
| 1 | 120 | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | FB2 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | 150 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16 |
| 1 | 150k | Resistor_SMD:R_0603_1608Metric | R34 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | 200k | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | 220p | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 30k | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 39u | Inductor_SMD:L_Sunlord_SWPA8040S | L1 |
| 1 | 3k3 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | 47n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 4k7 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 60 | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | FB1 |
| 1 | 68k | Resistor_SMD:R_0603_1608Metric | R21 |
| 1 | AM26LV32xD | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U3 |
| 1 | Conn_01x02_Socket | Connector_Wire:SolderWire-4sqmm_1x02_P12mm_D3mm_OD6mm | J5 |
| 1 | Conn_01x03_Socket | Connector_Wire:SolderWire-4sqmm_1x03_P12mm_D3mm_OD6mm | J2 |
| 1 | Conn_01x03_Socket | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J1 |
| 1 | Conn_01x08_Socket | Connector_JST:JST_XH_B8B-XH-A_1x08_P2.50mm_Vertical | J4 |
| 1 | Conn_ARM_JTAG_SWD_10 | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical | J3 |
| 1 | Crystal | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm_HandSoldering | Y1 |
| 1 | DRV8353SRTAT | MyLib:DRV8353SRTAT | U1 |
| 1 | LED_3V3 | LED_SMD:LED_0805_2012Metric | D8 |
| 1 | LED_5V | LED_SMD:LED_0805_2012Metric | D7 |
| 1 | LED_Error | LED_SMD:LED_0805_2012Metric | D6 |
| 1 | LED_Status | LED_SMD:LED_0805_2012Metric | D5 |
| 1 | PESD1CAN,215 | Package_TO_SOT_SMD:SOT-23 | D4 |
| 1 | SMAJ60A | Diode_SMD:D_SMA-SMB_Universal_Handsoldering | D1 |
| 1 | SN65HVD230DR | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | STM32H523VET6 | Package_QFP:LQFP-100_14x14mm_P0.5mm | U8 |
| 1 | TI LM5164DDAR | MyLib:LM5164DDAR | U5 |
| 1 | TLV75533PDBVR | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U6 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J6 |
Similar boards
- 4 layers74.1 × 99.3 mm

- 2 layers100 × 60 mm

Device
jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
11 parts2 - 4 layers40 × 75 mm

CUR flight computer 25-26
CU-Rocketry/flight_computer
Competition Flight Computer Module 25-26
169 parts1 - 4 layers60 × 105 mm

Walkman - Blobject
ProccyBoi/kiku
kiku is an open-source portable audio player built around an STM32H523 microcontroller. The project combines Bluetooth audio, local microSD playback, FM radio, a colour display, headphone and speaker outputs, battery…
142 parts - 2 layers400 × 40 mm

PTL RAIL
mayoogh-flexli/Meesho-Put-To-Light
Modular, daisy-chained 5-node IR emitter/receiver rail for the Meesho put-to-light system. Each 400 mm board has five bin positions on an 84 mm pitch.
147 parts - 4 layers119 × 79 mm

Luxdmx
tombueng/LuxDMX
Open-source Art-Net / sACN (E1.31) → DMX512 gateway for ESP32 / ESP32-S3 / Ethernet. Live web UI shows all 512 channels in real time, flags console conflicts, and drives galvanically-isolated DMX.
97 parts97 - 4 layers150 × 107.5 mm

Base
bornier-dev/bornier
Open source EtherCAT slaves for machine tools running LinuxCNC: hardware, firmware and tooling.
517 parts - 4 layers60 × 60 mm

Questions
How big is the Motor bldc esc V1 PCB?
It measures 94.3 × 95.7 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Motor bldc esc V1 use?
117 parts, built around the STM32H523VET6, SN65HVD230DR, DRV8353SRTAT and TLV75533PDBVR-MS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Motor bldc esc V1 KiCad files?
From the middelhauvephilipp-stack/motor_control_pcb_design repository on GitHub, at the commit this page was made from: the board is motor_bldc_esc_V1.kicad_pcb and its schematic communication.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Motor bldc esc V1 design in my own project?
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).