2 layers101.6 × 114.3 mm
2 layers70 × 82.5 mm
Nuco v kibot test
MicroType-Engineering/nuco-v-kibot-test2+ Designed for the STM32F7 and STM32H7 series + Pin-compatible with NUCLEO-64 boards + Integrated Blackmagic probe
- Size
- 70 × 82.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 141
- Nets
- 183
- Pads
- 605
- Tracks, vias
- 1,827, 208
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 2 Oct 2021
- Updated
- 2 Oct 2021
Overview
Nuco v kibot test is an open-source printed circuit board by MicroType-Engineering, from the MicroType-Engineering/nuco-v-kibot-test repository on GitHub. It is a 2-layer board of 70 × 82.5 mm with 141 parts on 183 nets, routed with 1,827 tracks and 208 vias.
It is built around the STM32F103CBT6, SN74LVC2T45DCU and ESDA5V3SC6, with the LD39050PUR, LM1117-3.3 and NTS4173P among its other parts. Its parts include 35 capacitors, 29 resistors, 18 crystals, 10 ICs and 7 diodes. It belongs with the STM32 boards of this library.
Main components
7
STM32F103CBT6
LQFP-48(7x7)-40℃~+85℃ 128KB 12bit 20KB 2V~3.6V 32 Bit 37 72MHz ARM Cortex-M3 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
SN74LVC2T45DCU
VSSOP-8-0.5mm-40℃~+85℃ 1.65V~5.5V 10uA 2 2 32mA 32mA 74LVC Bidirectional Tri-State VSSOP-8 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffer/Driver/Transceiver
ESDA5V3SC6
SOT-23-6-55℃~+125℃ 100nA 15V 200pF 20A@8/20us 3.3V 350W@8/20us 5.6V ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
LD39050PUR
DFN-6(3x3)-40℃~+125℃@(Tj) 1 20uA 30uVrms 400mV@(500mA) 5.5V 500mA 65dB@(1kHz) 800mV~5.5V Adjustable PG Pin、Short Circuit Protection、Thermal Shutdown Positive DFN-6(3x3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
LM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorised
NTS4173P
SC-70-3-55℃~+150℃ 1 P-Channel 1.2A 1.5V 280mΩ@2.5V 290mW 30V 4.8nC@10V 40pF 430pF SC-70-3 MOSFETs ROHSonsemiMOSFETs
SS24FL
SOD-123F-55℃~+125℃ 1 Independent 100uA@40V 2A 40V 50A 550mV@2A SOD-123F Schottky Diodes ROHSonsemiSchottky Diodes
README
README.mdNUCO-V
- Designed for the STM32F7 and STM32H7 series
- Pin-compatible with NUCLEO-64 boards
- Integrated Blackmagic probe
Parts
141| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | JUMPER | SMD-CMN:SMD-0603J | SB1, SB2, SB10, SB11, SB12, SB13, SB14, SB15, SB16, SB23, SB24, SB25, SB26, SB27, SB28, SB29 +4 |
| 10 | 100n | SMD-CMN:SMD-0603C | C22, C23, C24, C25, C27, C28, C29, C31, C32, C35 |
| 10 | JUMPER | SMD-CMN:SMD-0603R | SB5, SB6, SB8, SB9, SB17, SB18, SB19, SB20, SB21, SB22 |
| 7 | 0.1uF | SMD-CMN:SMD-0603C | C6, C7, C8, C9, C10, C19, C20 |
| 6 | 100 | SMD-CMN:SMD-0603R | R10, R11, R12, R13, R14, R15 |
| 5 | 10k | SMD-CMN:SMD-0603R | R8, R9, R20, R25, R26 |
| 4 | 470 | SMD-CMN:SMD-0603R | R22, R23, R24, R27 |
| 4 | SN74LVC2T45 | SMD-QFN:SO65P030X030-8 | U4, U5, U6, U7 |
| 3 | 10K | SMD-CMN:SMD-0603R | R1, R2, R29 |
| 3 | BUTTON1 | SWITCHES:TL-3301A-FXXX-QG | SW1, SW2, SW3 |
| 2 | 0603G | OPTOEL:LED-0603 | D2, D7 |
| 2 | 0603R | OPTOEL:LED-0603 | D3, D6 |
| 2 | 10n | SMD-CMN:SMD-0603C | C1, C33 |
| 2 | 10nF | SMD-CMN:SMD-0603C | C11, C12 |
| 2 | 1N7002 | SMD-SOT:SC-70-3 | Q1, Q2 |
| 2 | 1u | SMD-CMN:SMD-0603C | C30, C34 |
| 2 | 1uF | SMD-CMN:SMD-0603C | C18, C21 |
| 2 | 2.2uF | SMD-CMN:SMD-0603C | C13, C14 |
| 2 | 20pF | SMD-CMN:SMD-0603C | C4, C5 |
| 2 | 22 | SMD-CMN:SMD-0603R | R16, R18 |
| 2 | 330 | SMD-CMN:SMD-0603R | R21, R28 |
| 2 | 4k7 | SMD-CMN:SMD-0603R | R7, R19 |
| 2 | CAPACITOR | SMD-CMN:SMD-0603C | C2, C3 |
| 2 | CONN-02P1LA | CONNFLY:DS1021-1X02S61 | X12, X13 |
| 2 | CONN-08P1L | CONNFLY:DS1023-1X08A | X2, X6 |
| 2 | NTS4173 | SMD-SOT:SC-70-3 | Q3, Q4 |
| 1 | 0603O | OPTOEL:LED-0603 | D4 |
| 1 | 0603Y | OPTOEL:LED-0603 | D5 |
| 1 | 10.2K | SMD-CMN:SMD-0603R | R6 |
| 1 | 10uF | SMD-CMN:SMD-0603C | C17 |
| 1 | 10uF | SMD-CMN:SMD-1206C | C15 |
| 1 | 120 | SMD-CMN:SMD-0603R | R3 |
| 1 | 1k5 | SMD-CMN:SMD-0603R | R17 |
| 1 | 1n | SMD-CMN:SMD-0603C | C26 |
| 1 | 32.0K | SMD-CMN:SMD-0603R | R5 |
| 1 | 32.768K | QUARTZ:KX-327S | Y1 |
| 1 | 360 | SMD-CMN:SMD-0603R | R4 |
| 1 | 4.7uF | SMD-CMN:SMD-1206C | C16 |
| 1 | 8MHz | QUARTZ:MUR-CSTCE | Y3 |
| 1 | 8MHz | QUARTZ:KX-3H | Y2 |
| 1 | BEAD | SMD-CMN:SMD-0603L | L1 |
| 1 | CONN-02P1L | CONNFLY:DS1021-1X02S61 | X15 |
| 1 | CONN-03P1L | CONNFLY:DS1021-1X03S61 | X4 |
| 1 | CONN-04P1L | CONNFLY:DS1021-1X04S61 | X9 |
| 1 | CONN-06P1L | CONNFLY:DS1023-1X06A | X3 |
| 1 | CONN-06P1L | JST:B6B-PH-K-S | X14 |
| 1 | CONN-10P1L | CONNFLY:DS1023-1X10A | X5 |
| 1 | CONN-10P2L | CONNFLY:DS1031-08-2X05P8BSX | X11 |
| 1 | CONN-12P2L | CONNFLY:DS1021-2X06S61 | X10 |
| 1 | ESDA5V3SC6 | SMD-SOT:SOT-23-6 | U8 |
| 1 | G*** | logo:FALLOUT_1 | svg2mod |
| 1 | KiCad Logo | logo:KiCad-Logo_Copper_11mmx5mm | G*** |
| 1 | LD39050PU | SMD-QFN:DFNX95P030X030-6 | U3 |
| 1 | LM1117 | SMD-SOT:SOT-223-3 | U2 |
| 1 | LOGO | logo:esd1 | G*** |
| 1 | LP2985N | SMD-SOT:SOT-23-5 | U10 |
| 1 | SS24FL | SMD-SOT:SOD-123F | D1 |
| 1 | ST-MORPHO-CN10 | CONNFLY:DS1021-2X19S61 | X7 |
| 1 | ST-MORPHO-CN7 | CONNFLY:DS1021-2X19S61 | X1 |
| 1 | STM32F103CBT6 | SMD-QFN:QFP50P070X070-48 | U9 |
| 1 | STM32H742Vx | SMD-QFN:QFPX50P140X140-100 | U1 |
| 1 | USB-OTG | CONNECTORS:AMP10118194-0001LF | X8 |
| 1 | VAL** | logo:OSHW_FS_10MM | OSHW_FS_10MM |
Questions
How big is the Nuco v kibot test PCB?
It measures 70 × 82.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Nuco v kibot test use?
141 parts, built around the STM32F103CBT6, SN74LVC2T45DCU, ESDA5V3SC6 and LD39050PUR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nuco v kibot test KiCad files?
From the MicroType-Engineering/nuco-v-kibot-test repository on GitHub, at the commit this page was made from: the board is nuco-v-kibot-test.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nuco v kibot test design in my own project?
Its repository states no licence, so its author keeps all rights: ask MicroType-Engineering before reusing the design.
Similar boards
- 4 layers100 × 100 mm
GP22 board
charlesbaynham/GP22_RF_Photon_Correllation
Schematic, PCB and source code for a low-cost TDC interface designed for performing RF--Photon correllation for atomic physics experiments
147 parts11 - 10 layers80 × 100 mm
- 4 layers317.5 × 134.6 mm
Keeb
bandakkalokka/kottoruwa-hardware
An awesome wireless mechanical keyboard with Li-Ion Battery Managemet, 2.4GHz radio and an OLED Display!
233 parts12GPL-3.0 - 2 layers115 × 80 mm
- 4 layers60 × 37 mm
- 2 layers60 × 90 mm
- 2 layers38.7 × 106.7 mm
