Skip to the content
1234567

LD39050PUR

STMicroelectronicsExtended

-40℃~+125℃@(Tj) 1 20uA 30uVrms 400mV@(500mA) 5.5V 500mA 65dB@(1kHz) 800mV~5.5V Adjustable PG Pin、Short Circuit Protection、Thermal Shutdown Positive DFN-6(3x3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
st/LD39050PUR
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
DFN-6(3x3)
Pins
7
In stock
460 at JLCPCB (C222094)
Used on
5 open-source boards

Overview

The LD39050PUR is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by STMicroelectronics in a DFN-6(3x3) package with 7 pins. -40℃~+125℃@(Tj) 1 20uA 30uVrms 400mV@(500mA) 5.5V 500mA 65dB@(1kHz) 800mV~5.5V Adjustable PG Pin、Short Circuit Protection、Thermal Shutdown Positive DFN-6(3x3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:LD39050PUR, from EasyEDA) and its footprint (EasyEDA_Cloud:DFN-6_L3.0-W3.0-P0.95-LS3.1-TL-EP, from EasyEDA), ready for a KiCad board. 460 are in stock at JLCPCB (part C222094). 5 open-source boards in 5 repositories on GitHub use it.

Symbol

1EN2GND3PG4VOUT5NC/ADJ6VIN7EPAD
EasyEDA_Cloud:LD39050PURFrom EasyEDA

Footprint

1234567
EasyEDA_Cloud:DFN-6_L3.0-W3.0-P0.95-LS3.1-TL-EPFrom EasyEDA

Pinout

7
The pins of the LD39050PUR
PinNameType
1ENUnspecified
2GNDUnspecified
3PGUnspecified
4VOUTUnspecified
5NC/ADJUnspecified
6VINUnspecified
7EPADUnspecified

Open-source boards using it

5
  • 4 layers317.5 × 134.6 mmKeeb, the printed circuit board in 3D

    Keeb

    bandakkalokka/kottoruwa-hardware

    An awesome wireless mechanical keyboard with Li-Ion Battery Managemet, 2.4GHz radio and an OLED Display!

    233 parts12GPL-3.0
  • 2 layers115 × 80 mmWheather board v1, the printed circuit board in 3D

    Wheather board v1

    nbreard/mellia

    https://www.mellia.fr/

    69 parts11
  • 4 layers60 × 37 mmTdr, the printed circuit board in 3D

    Tdr

    blazra/tdr

    TDR using Lattice ECP5 High Data Rate Transceiver

    144 parts2
  • 2 layers70 × 82.5 mmNuco v kibot test, the printed circuit board in 3D

    Nuco v kibot test

    MicroType-Engineering/nuco-v-kibot-test

    + Designed for the STM32F7 and STM32H7 series + Pin-compatible with NUCLEO-64 boards + Integrated Blackmagic probe

    141 parts2
  • 2 layers60 × 90 mmRSM HW, the printed circuit board in 3D

    RSM HW

    codedog-pl/RSM_HW

    Remote Sensor Module - Hardware

    197 parts

Parts like it

1

Questions

Is there a KiCad symbol and footprint for the LD39050PUR?

Yes. The symbol is EasyEDA_Cloud:LD39050PUR and the footprint EasyEDA_Cloud:DFN-6_L3.0-W3.0-P0.95-LS3.1-TL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LD39050PUR?

DFN-6(3x3), with 7 pins. Its footprint is drawn on this page.

Where is the LD39050PUR datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the LD39050PUR?

JLCPCB lists it as part C222094, with 460 in stock; the sellers' links on this page open their listings.

What can replace the LD39050PUR?

Parts like it in the library: the LD39050PU33R by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LD39050PUR?

5 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.