

Smart puck
A Zigbee sensor puck
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 53
- Pads
- 186
- Tracks, vias
- 53, 0
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 11 Aug 2026
- Updated
- 2 Sep 2026
Overview
Smart puck is an open-source printed circuit board by MichaelK-F, from the MichaelK-F/smart-puck repository on GitHub. It is a 2-layer board with 31 parts on 53 nets, routed with 53 tracks and 0 vias.
It is built around the BQ25185DLHR, ESP32-C6-MINI-1 and MAX17048G+T10, with the GT-TZ084B-H015-L1 and RS-C1415MBAR among its other parts. Its parts include 13 resistors, 7 capacitors, 5 ICs, 3 connectors and 1 diode. It belongs with the ESP32 and RISC-V boards of this library.
Main components
5BQ25185DLHR
WSON-10-EP(2.2x2)-40℃~+125℃ 1 1A 2.2V 3V~18V 4.4V 4uA Charging IC Lithium Battery、LiFePO4 Battery Support WSON-10-EP(2.2x2) Battery Management ROHSTexas InstrumentsBattery ManagementESP32-C6-MINI-1
SMD,13.2x16.6mmSMD,13.2x16.6mm New Arrivals ROHSEspressif SystemsUncategorisedMAX17048G+T10
DFN-8-EP(2x2)-40℃~+85℃ 1 2.5V~4.5V 3uA I2C Lithium Battery Not supported Not supported DFN-8-EP(2x2) Battery Management ROHSMaxim Integrated (Analog Devices)Battery ManagementGT-TZ084B-H015-L1
SMD-4P,5.2x5.2mm-40℃~+85℃ 1.5mm 100,000 cycles 12V 2.5N 5.2mm 5.2mm 50mA No Round Button SMD(SMT) Tab SPST Surface Mount,Vertical Without Bracket Yellow SMD-4P,5.2x5.2mm Tactile Switches ROHSG-SwitchTactile SwitchesRS-C1415MBAR
SMD-4P,1.6x1.6mm-30℃~+85℃ 1.4mm 1.6mm 1.6mm 110° Common Cathode R:15mA、G:8mA、B:5mA R:2.1V、B:2.7V、G:2.6V R:360mcd、G:400mcd、B:50mcd R:60mW、G:85mW、B:68mW R:622nm、G:528nm、B:470nm Top-mount SMD-4P,1.6x1.6mm RGB LEDs ROHSFoshan NationStar OptoelectronicsRGB LEDs
README
README.mdSmart Puck
A Zigbee sensor puck
Current Plan:
- microcontroller: ESP32-C6-MINI-1-N4 https://jlcpcb.com/partdetail/EspressifSystems-ESP32_C6_MINI_1N4/C5736265
- USB-C port: USB-TYPE-C-018 https://jlcpcb.com/partdetail/DEALON-USB_TYPE_C018/C2927038
- battery/power management:
- battery connector: S2B-PH-K-S(LF)(SN) https://jlcpcb.com/partdetail/JST-S2B_PH_K_S_LF_SN/C173752
- battery (2000mAh) https://core-electronics.com.au/polymer-lithium-ion-battery-2000mah-38459.html
- BQ25185 (charger/power path) https://jlcpcb.com/partdetail/TexasInstruments-BQ25185DLHR/C19725033
- TPS63900 (buck/boost) https://jlcpcb.com/partdetail/TexasInstruments-TPS63900DSKR/C1518762
- MAX17048G (fuel gauge) https://jlcpcb.com/partdetail/2777647-MAX17048GT10/C2682616
- led: RS-C1415MBAR https://jlcpcb.com/partdetail/3079315-RSC1415MBAR/C2874181
- boot mode button: GT-TZ084B-H015-L1 https://jlcpcb.com/partdetail/GSwitch-GT_TZ084B_H015L1/C29780122
- temperature/humidity: SHT45-AD1F-R2 https://jlcpcb.com/partdetail/Sensirion-SHT45_AD1FR2/C5360602
- mmwave: HLK-LD2420 https://core-electronics.com.au/human-micro-motion-detection-mmwave-sensor.html
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10kOhm | Resistor_SMD:R_0805_2012Metric | R4, R12, R13 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric | C3, C5, C7 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C2, C4 |
| 2 | 4.7kOhm | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 2 | 5.1kOhm | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | 68Ohm | Resistor_SMD:R_0402_1005Metric | R9, R10 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 100Ohm | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 18kOhm | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 1kOhm | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 2.2uH 30mOhm | Inductor_SMD:L_TechFuse_SL0624 | L1 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 36.5kOhm | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | BQ25185DLHR | BQ25185:WSON10_DLH_TEX | U4 |
| 1 | Battery | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J3 |
| 1 | ESP32-C6-MINI-1 | RF_Module:ESP32-C6-MINI-1 | U1 |
| 1 | GT-TZ084B-H015-L1 | GT-TZ084B-H015-L1:SW-SMD_4P-L5.2-W5.2-P3.70-LS6.4 | SW1 |
| 1 | HLK-LD2420 | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J2 |
| 1 | MAX17048G+T10 | MAX17048G:21-0168E_T822-3_MXM | U5 |
| 1 | RS-C1415MBAR | RS-C1415MBAR:LED-ARRAY-SMD_4P-L1.6-W1.6-BR-RD-CW | D1 |
| 1 | SHT4x | Sensor_Humidity:Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad | U3 |
| 1 | TPS63900 | Package_SON:WSON-10-1EP_2.5x2.5mm_P0.5mm_EP1.2x2mm_ThermalVias | U2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
Similar boards
- 2 layers285 × 94.6 mm

- 4 layers51 × 77 mm

- 2 layers

Insta360-joystick
jfwoods/insta360link-controller
A lightweight daemon, CLI tool, and (optional) firmware + hardware for controlling an Insta360 Link webcam without the first-party software.
58 parts9 - 2 layers55.6 × 57.2 mm

- 4 layers24 × 42 mm

Aura a03
Avinash1286/pendent
AURA: open wearable note-taking device development — PCB, printable case, firmware, Next.js/Convex notes, interactive 3D site and launch film.
61 parts - 2 layers38.9 × 48.9 mm

- 2 layers60 × 42 mm

Smart safety tag
balu-16/SeedGrant_Safety
Personal-safety project: Expo / React Native client + FastAPI + PostgreSQL (Supabase) backend + React admin portal.
83 parts - 4 layers56 × 52 mm

EdgeLink S3 Cellular
CDonohoe-Designs/EdgeLink_S3_Cellular
EdgeLink S3 Cellular is a four-layer embedded hardware platform combining an ESP32-S3 controller, SIM7080G cellular/GNSS modem, USB-C, battery power management and environmental/motion sensing.
114 parts
Questions
What parts does the Smart puck use?
31 parts, built around the BQ25185DLHR, ESP32-C6-MINI-1, MAX17048G+T10 and GT-TZ084B-H015-L1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Smart puck KiCad files?
From the MichaelK-F/smart-puck repository on GitHub, at the commit this page was made from: the board is hardware/kicad/smart-puck.kicad_pcb and its schematic hardware/kicad/smart-puck.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Smart puck design in my own project?
Its repository states no licence, so its author keeps all rights: ask MichaelK-F before reusing the design.