2 layers86.6 × 51.4 mm
MSP Debugger
jdbaptista/MSP-Debugger
Files for a device that displays instructions stored on an MSP430G2553IN20.
37 parts1
2 layers98.3 × 96.5 mm
Labview 2
miautort/PCB-Shark1My first PCB design project - university project
- Size
- 98.3 × 96.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 30
- Pads
- 82
- Tracks, vias
- 184, 3
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 25 Dec 2025
- Updated
- 25 Dec 2025
Overview
Labview 2 is an open-source printed circuit board by miautort, from the miautort/PCB-Shark repository on GitHub, published under the MIT licence. It is a 2-layer board of 98.3 × 96.5 mm with 29 parts on 30 nets, routed with 184 tracks and 3 vias.
It is built around the MSP430G2553IN20 and TLV1117-33DCY. Its parts include 12 diodes, 7 resistors, 3 capacitors, 2 ICs and 2 connectors. It belongs with the MSP430 boards of this library.
Main components
2README
README.mdThis is a simple project given as an assignment. The conditions were for the board to be within 100x100mm, and to use the specified microprocessor.
The task itself was to draw something with LEDs. As just placing some LEDs was just boring, I decided to make it interesting through shape as well, and use the components themselves to make it look better. The rat with pink bow meme exploded just about in time to inspire me, so here we are, with a shark with a pink shiny bow.
Here's the component list:
| Component | Number and/or Type |
|---|---|
| Microcontroller | MSP430G2553IN20 (U1) |
| LED | 12* ; both 3mm and 5mm are compatible |
| Capacitors | 1x1nF (C1) ; 1x10uF (C3) ; 1x22uF (C2) |
| Connectors | Micro-USB for power (J2) ; 4-pin for programming (J1) |
| Resistors | 1x100kOhm (R1) ; 6x330** Ohm |
| Quartz Crystal | 32kHz (Y1) |
| Voltage Regulator | TLV1117-33 (U2) |
*I used 10 pink for the bow and 2 blue for the eye
**The resistor values depend on the chosen LED color
Below is a screenshot of the electric circuit itself; below that the PCB design, first without ground plan, then with.
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | LED | LED_THT:LED_D3.0mm | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D12 |
| 6 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3, R4, R5, R7, R8 |
| 2 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 10u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C3 |
| 1 | 1n | Capacitor_THT:C_Disc_D7.5mm_W5.0mm_P7.50mm | C1 |
| 1 | 22u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C2 |
| 1 | 32kHz | Crystal:Crystal_C38-LF_D3.0mm_L8.0mm_Vertical | Y1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | LED | LED_THT:LED_D5.0mm | D11 |
| 1 | MSP430G2553IN20 | Package_DIP:DIP-20_W7.62mm | U1 |
| 1 | TLV1117-33 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Wuerth_614105150721_Vertical_CircularHoles | J2 |
Similar boards
- 2 layers70 × 60 mm
MikroProje
MehmetBurakYilmaz55/Smart-Plant-Monitor-MSP430
MSP430 tabanlı, gerçek zamanlı sensör verisi işleme (NTC, Nem, LDR) ve otonom karar mekanizmasına sahip, donanımsal register seviyesinde (bare-metal) geliştirilmiş akıllı bitki yetiştirme otomasyon sistemi
28 parts1 - 2 layers140.6 × 124.5 mm
Mikro
UmutAldioglu67/Smart-Lighting-System-MSP430
"MSP430G2553 tabanlı, dış kütüphane kullanılmadan bare-metal (register seviyesi) geliştirilmiş, PIR ve LDR sensör geri bildirimli otonom akıllı aydınlatma sistemi."
84 parts1 - 2 layers56.2 × 69.4 mm
- 2 layers40.6 × 58.4 mm
Room board
frankalicious/room-board
room-board-schematic ==================== # hardware - MSP430G2553IN20 - pir module - brightness measuring with led (kicad version uses phototransistor) - nrf24l01 radio module
23 partsGPL-2.0 - 2 layers48 × 72 mm
Flipklok
h-buter/Flipklok
Welcome to the repository for my project as part of my Bachelor's degree in Electronics at Windesheim. This project involves creating a flip clock inspired by the design from the 1970s, which is synchronized using time…
70 parts - 2 layers74.7 × 53.6 mm
- 2 layers73.6 × 42.7 mm
PACS 1.0
jaddib/PACS-21-Hardware
Collection of our files for the U-Alberta 2025 EE Capstone: Plant Automated Care System
47 parts
Questions
How big is the Labview 2 PCB?
It measures 98.3 × 96.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Labview 2 use?
29 parts, built around the MSP430G2553IN20 and TLV1117-33DCY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Labview 2 KiCad files?
From the miautort/PCB-Shark repository on GitHub, at the commit this page was made from: the board is labview 2.kicad_pcb and its schematic labview 2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Labview 2 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).