
MSP Debugger
jdbaptista/MSP-Debugger
Files for a device that displays instructions stored on an MSP430G2553IN20.

room-board-schematic ==================== # hardware - MSP430G2553IN20 - pir module - brightness measuring with led (kicad version uses phototransistor) - nrf24l01 radio module
Room board is an open-source printed circuit board by frankalicious, from the frankalicious/room-board repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 40.6 × 58.4 mm with 23 parts on 29 nets, routed with 141 tracks and 1 via.
It is built around the MSP430G2553IN20 and NRF24L01. Its parts include 5 resistors, 4 capacitors, 3 ICs, 3 diodes and 1 switch. It belongs with the MSP430 boards of this library.
https://github.com/frankalicious/nrf24l01-serial-gateway
gschem was used for first schematic version
designed in kicad
msp430-gcc firmware uses msprf24
$ git submodule init
$ git submodule updateFor more information about git submodules see here: http://git-scm.com/book/en/v2/Git-Tools-Submodules
Use firmware/msp430-gcc/. firmware/Enrf24_TXdemo_with_PIR/ does not seem to work
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100nF | Discret:C1 | C1, C2, C4 |
| 2 | 10k | Discret:R3 | R2, R3 |
| 2 | 4k7 | Discret:R3 | R1, R4 |
| 2 | LED | LEDs:LED-5MM | D1, D3 |
| 1 | 2u2F | Capacitors_Elko_ThroughHole:Elko_vert_11x5mm_RM2.5 | C3 |
| 1 | 47k | Discret:R3 | R5 |
| 1 | AB2_HDR03-1 | ab2_header:AB2_HDR_M03-1V | HDR1 |
| 1 | CONN_3 | ab2_power:AB2_PB_2MM_JACK_PTH | K1 |
| 1 | DHT | Pin_Headers:Pin_Header_Straight_1x04 | U3 |
| 1 | EN_POWER_LED | ab2_header:AB2_HDR_M02-1V | HDR6 |
| 1 | LM33CV | Discret:LM78XXV | U2 |
| 1 | MSP430G2553IN20 | Sockets_DIP:DIP-20__300 | U1 |
| 1 | NRF24L01 | ab2_header:AB2_HDR_M04-2V | HDR2 |
| 1 | POWER | ab2_header:AB2_HDR_M02-1V | HDR5 |
| 1 | POWER_3V3 | ab2_header:AB2_HDR_M02-1V | HDR7 |
| 1 | PROGRAM | ab2_header:AB2_HDR_M03-1V | HDR4 |
| 1 | SFH 300 | LEDs:LED-5MM | D2 |
| 1 | UART | ab2_header:AB2_HDR_M06-1V | HDR3 |

jdbaptista/MSP-Debugger
Files for a device that displays instructions stored on an MSP430G2553IN20.

MehmetBurakYilmaz55/Smart-Plant-Monitor-MSP430
MSP430 tabanlı, gerçek zamanlı sensör verisi işleme (NTC, Nem, LDR) ve otonom karar mekanizmasına sahip, donanımsal register seviyesinde (bare-metal) geliştirilmiş akıllı bitki yetiştirme otomasyon sistemi


UmutAldioglu67/Smart-Lighting-System-MSP430
"MSP430G2553 tabanlı, dış kütüphane kullanılmadan bare-metal (register seviyesi) geliştirilmiş, PIR ve LDR sensör geri bildirimli otonom akıllı aydınlatma sistemi."


h-buter/Flipklok
Welcome to the repository for my project as part of my Bachelor's degree in Electronics at Windesheim. This project involves creating a flip clock inspired by the design from the 1970s, which is synchronized using time…


jaddib/PACS-21-Hardware
Collection of our files for the U-Alberta 2025 EE Capstone: Plant Automated Care System
It measures 40.6 × 58.4 mm and has 2 copper layers, 1.6 mm thick.
23 parts, built around the MSP430G2553IN20 and NRF24L01. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the frankalicious/room-board repository on GitHub, at the commit this page was made from: the board is kicad/room_board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).