PixelPetBoardV1
a-bettilyon/pixel-pet
Pixel Pet is a handheld ESP32-based gaming system that allows you to interact and play with a virtual pet. Includes a custom PCB, 3D printed enclosure, and from-scratch C++ code.

BusinessCard25
BC25 PCB SRC 20250512 is an open-source printed circuit board by mgarcia50100, from the mgarcia50100/BC25 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 85 × 109 mm with 285 parts on 153 nets, routed with 3,136 tracks and 409 vias.
It is built around the ATMEGA32U4RC-MU, INA214AIDCKR-S and MAX30101EFD+T, with the TPQ051004-DFOR, FXLS8967AFR3 and MIC5264-SGYML-TR among its other parts. Its parts include 132 diodes, 43 capacitors, 9 ICs, 9 transistors and 7 resistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
BusinessCard25
| Qty | Value | Footprint | References |
|---|---|---|---|
| 113 | SML-522MD8WT86 | footprints:LED_SML-521_ROM-L | D11, D100, D101, D102, D103, D104, D105, D107, D108, D109, D110, D111, D112, D113, D114, D115 +97 |
| 13 | 100n | Capacitor_SMD:C_0402_1005Metric | C2, C12, C16, C17, C20, C21, C24, C25, C28, C32, C33, C34, C35 |
| 11 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8, JP9, JP10, JP11 |
| 9 | BC848CPDW1T1G | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q1, Q301, Q302, Q303, Q304, Q305, Q306, Q307, Q308 |
| 8 | 10u | Capacitor_SMD:C_0603_1608Metric | C5, C8, C14, C19, C22, C26, C36, C205 |
| 8 | LED | LED_SMD:LED_0603_1608Metric | D10, D99, D106, D120, D121, D122, D123, D124 |
| 8 | XL-1608UPC-06 | LED_SMD:LED_0603_1608Metric | D301, D302, D303, D304, D305, D306, D307, D308 |
| 5 | 10n | Capacitor_SMD:C_0603_1608Metric | C4, C6, C7, C11, C13 |
| 5 | 1uF | Capacitor_SMD:C_0603_1608Metric | C3, C9, C10, C18, C27 |
| 3 | 1M | Resistor_SMD:R_0805_2012Metric | R1, R4, R202 |
| 3 | C0805V472KDRACTU | Capacitor_SMD:C_0805_2012Metric | C1, C37, C200 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric | C203, C204 |
| 2 | 12p | Capacitor_SMD:C_0402_1005Metric | C30, C31 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C201, C202 |
| 2 | 5010 | footprints:TP_5011 | TP200, TP204 |
| 2 | 5011 | footprints:TP_5011 | TP201, TP205 |
| 2 | EXB-28V512JX | Resistor_SMD:R_Array_Convex_4x0402 | RN4, RN5 |
| 2 | EXB-2HV151JV | footprints:RES_YC248_4X1P6_YAG-L | RN2, RN3 |
| 2 | MF-FSMF010X-2 | Fuse:Fuse_0603_1608Metric | F1, F201 |
| 2 | SBR2M60S1F-7 | Diode_SMD:D_SOD-123F | D2, D3 |
| 1 | 100K | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C15 |
| 1 | 110990030 | footprints:SEEED_110990030 | J203 |
| 1 | 1206L050YR | Fuse:Fuse_1206_3216Metric | F202 |
| 1 | 200K | Resistor_SMD:R_0402_1005Metric | R201 |
| 1 | 3.3 uF | Capacitor_SMD:C_0805_2012Metric | C29 |
| 1 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C23 |
| 1 | 5121 / GN | footprints:KEYSTONE_5006 | TP202 |
| 1 | 5122 / BLUE | footprints:KEYSTONE_5006 | TP203 |
| 1 | 68o | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 7447629022 | Inductor_SMD:L_1008_2520Metric | L1 |
| 1 | ATmega32U4RC-MU | Package_DFN_QFN:QFN-44-1EP_7x7mm_P0.5mm_EP5.2x5.2mm | U2 |
| 1 | BZX384C3V6 | Diode_SMD:D_SOD-323 | D1 |
| 1 | Battery_Cell_HOLDER | footprints:BHSD-2032-SM | BT1 |
| 1 | CX70M-24P1 | footprints:PLUG-USBC-241SMTV-4BS60 | J200 |
| 1 | CX70M-24P1 | footprints:CX70M-24P1_HIR | J1 |
| 1 | Conn_01x01_Female | libs:FingerPrintPlastronConnector | FP1 |
| 1 | EXB-24V220JX | Resistor_SMD:R_Array_Convex_2x0603 | RN1 |
| 1 | FXLS8967AFR3 | Package_DFN_QFN:DFN-10_2x2mm_P0.4mm | U1 |
| 1 | INA214AIDCKR | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U201 |
| 1 | INJECT 3V LDO | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP201 |
| 1 | LOGO | libs:heartrate | G*** |
| 1 | LOGO | libs:power | G*** |
| 1 | LOGO | libs:accel3D | G*** |
| 1 | LOGO | libs:loveEarth | G*** |
| 1 | LOGO | libs:wiseFace | G*** |
| 1 | LOGO | libs:bc25BackSideSilk | G*** |
| 1 | LOGO | libs:devBaordBackSilk | G*** |
| 1 | LOGO | libs:FingerPrintLeftMixed | G*** |
| 1 | MAX30101EFD | libs:PSON80P560X330X165-14N | U4 |
| 1 | MCP4706A0T-E/MAY | Package_DFN_QFN:DFN-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U6 |
| 1 | MF-FSMF020X-2 | Fuse:Fuse_0603_1608Metric | F2 |
| 1 | MFHA1206R7000FC | Resistor_SMD:R_1206_3216Metric | R200 |
| 1 | MIC5264-SGYML-TR | footprints:MLF-10_ML_MCH | U5 |
| 1 | MLF1608A3R3KTA00 | Inductor_SMD:L_0603_1608Metric | L2 |
| 1 | PCA9306DP,118 | Package_SO:TSSOP-8_3x3mm_P0.65mm | U202 |
| 1 | PROVIDE VBUS | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP200 |
| 1 | SMT-0540-T-9-R | footprints:XDCR_SMT-0540-T-9-R | LS1 |
| 1 | SXT22412BA07-12.288M | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | Y1 |
| 1 | TLV74330PDBVR | Package_TO_SOT_SMD:SOT-23-5 | U200 |
| 1 | TPQ051004-DFOR | Package_DFN_QFN:DFN-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U3 |
| 1 | TSW-103-07-F-D | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J202 |
| 1 | USB4520 | footprints:USB4520 | J201 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | TV1 |
| 1 | YC248-JR-07220RL | footprints:RES_YC248_4X1P6_YAG-L | RN301 |
| 1 | YC248-JR-0747KL | footprints:RES_YC248_4X1P6_YAG-L | RN302 |
The 250 most common of 285 parts.
a-bettilyon/pixel-pet
Pixel Pet is a handheld ESP32-based gaming system that allows you to interact and play with a virtual pet. Includes a custom PCB, 3D printed enclosure, and from-scratch C++ code.

apcountryman/pcb-main-nautilus-atmega4809
A Microchip ATmega4809 based mainboard PCB.

plane-watch/hardware
Hardware-based ADS-B receiver and decoder for a HelloFPGA Smart ZYNQ SL board

SpinWearables/SpinWheelHardware
The hardware design files for the SpinWheel.




It measures 85 × 109 mm and has 2 copper layers, 0.89 mm thick.
285 parts, built around the ATMEGA32U4RC-MU, INA214AIDCKR-S, MAX30101EFD+T and TPQ051004-DFOR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mgarcia50100/BC25 repository on GitHub, at the commit this page was made from: the board is BC25_PCB_SRC_20250512.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).