
PixelPetBoardV1
Pixel Pet is a handheld ESP32-based gaming system that allows you to interact and play with a virtual pet. Includes a custom PCB, 3D printed enclosure, and from-scratch C++ code.
- Size
- 51.5 × 44.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 63
- Nets
- 71
- Pads
- 247
- Tracks, vias
- 455, 63
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 15 Sep 2026
- Updated
- 24 Sep 2026
Overview
PixelPetBoardV1 is an open-source printed circuit board by a-bettilyon, from the a-bettilyon/pixel-pet repository on GitHub. It is a 4-layer board of 51.5 × 44.2 mm with 63 parts on 71 nets, routed with 455 tracks and 63 vias.
It is built around the ESP32-S3-WROOM-1-N8, BMI323 and BQ24079RGT, with the TLV75533PDBV, PTVSUC3D5VB and CL21A226MAQNNNE among its other parts. Its parts include 20 resistors, 18 capacitors, 6 switches, 5 diodes and 4 ICs. It belongs with the ESP32 boards of this library.
Main components
9ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesBMI323
LGA-14-40℃~+85℃ IMU (accelerometer + gyroscope) Motion event detection LGA-14 Accelerometers ROHSBosch SensortecAccelerometersBQ24079RGT
QFN-16-EP(3x3)-40℃~+125℃ 1.5A 4.1V 4.35V~6.6V 6.5uA Charging IC Lithium Battery Support QFN-16-EP(3x3) Battery Management ROHSTexas InstrumentsBattery ManagementTLV75533PDBV
SOT-23-5-40℃~+125℃@(Tj) 1 238mV@(500mA) 25uA 3.3V 46dB@(100kHz) 5.5V 500mA 71.5uVrms Fixed Over Current Protection、Thermal Shutdown、Input undervoltage protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsPTVSUC3D5VB
SOD-3231 1.2pF 1uA 23.6V 240W@8/20us 5V 6V Bidirectional IEC 61000-4-2、IEC 61000-4-4 TVS SOD-323 ESD and Surge Protection (TVS/ESD) ROHSShanghai Prisemi ElecESD And Surge Protection (TVS/ESD)CL21A226MAQNNNE
080522uF 25V X5R ±20% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTAO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsHC-1.25-2PWT
SMD,P=1.25mm,卧贴-40℃~+105℃ 1 1.25mm 125V 1A 1x2P 2 2P 3.57mm 5.25mm 7.55mm Auxiliary Solder Pin Brass LCP PicoBlade(MX 1.25) Surface Mount, Right Angle Tin UL94V-0 SMD,P=1.25mm,Surface Mount,Right Angle Wire To Board Connector ROHSHCTLWire To Board ConnectorSMT-0540-T-9-R
SMD,5x5mm-20℃~+70℃ 2.2mm 2V~5V 4kHz 5mm 5mm 80dB Electromagnetic Passive (Externally Driven) SMD,5x5mm Buzzers ROHSPUI Audio, Inc.Buzzers
README
hardware/README.mdHardware
⚠️ Status: Active development. PCB currently in bring-up and testing.
KiCad project for the Pixel Pet custom PCB, an ESP32-S3-based board with display, IMU, charging circuit, and user I/O.
Opening the project
Requires KiCad (developed in v8). Multiple custom part libraries are used, see /libraries.
Key design notes
- ESP32-S3-WROOM-1 module, 4-layer board
- BQ24079 LiPo charger with power path management
- BMI323 IMU (SPI), ST7789 TFT display
- Targeting JLCPCB fabrication + SMT assembly, with select hand-soldered THT parts
Gerbers / BOM freshness
Files in /gerbers and bom.csv are exported directly from the current .kicad_pcb/.kicad_sch. If you're building from this repo, pull these rather than any older exports that may exist elsewhere in project history.
Parts
63| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 10kΩ | PCM_JLCPCB:R_0402 | R3, R4, R8, R13, R15, R16, R17, R19, R20, R21 |
| 9 | 100nF | PCM_JLCPCB:C_0402 | C3, C4, C9, C10, C11, C12, C13, C14, C18 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | 4.7uF | PCM_JLCPCB:C_0402 | C5, C8, C15 |
| 2 | 10uF | PCM_JLCPCB:C_0603 | C16, C17 |
| 2 | 1uF | PCM_JLCPCB:C_0402 | C2, C7 |
| 2 | 220Ω | PCM_JLCPCB:R_0402 | R9, R10 |
| 2 | 5.1kΩ | PCM_JLCPCB:R_0402 | R11, R12 |
| 2 | PTVSUC3D5VB | easyeda2kicad:SOD-323_L1.8-W1.3-LS2.5-BI | D6, D7 |
| 1 | 1.5kΩ | PCM_JLCPCB:R_0402 | R5 |
| 1 | 100Ω | PCM_JLCPCB:R_0402 | R14 |
| 1 | 10kΩ | PCM_JLCPCB:R_1206 | R1 |
| 1 | 2.2uF | PCM_JLCPCB:C_0603 | C6 |
| 1 | 2171790001 | 2171790001_MOL:2171790001_MOL | J1 |
| 1 | 22uF | easyeda2kicad:C0805 | C1 |
| 1 | 3.9k | easyeda2kicad:R0603 | R6 |
| 1 | 47kΩ | PCM_JLCPCB:R_0402 | R7 |
| 1 | AO3400A | PCM_JLCPCB:Q_SOT-23 | Q2 |
| 1 | B5819W_C8598 | easyeda2kicad:SOD-123_L2.7-W1.6-LS3.7-RD-1 | D3 |
| 1 | BMI323 | BMI323:BMI323_BOS | U4 |
| 1 | BOOT | PCM_JLCPCB:SW_TS-1088-AR02016 | S2 |
| 1 | BQ24079RGT | Package_DFN_QFN:VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm | U2 |
| 1 | BTN_A | TS02_66_160_BK_160_LCR_D:SW_TS02-66-160-BK-160-LCR-D | S4 |
| 1 | BTN_B | TS02_66_160_BK_160_LCR_D:SW_TS02-66-160-BK-160-LCR-D | S5 |
| 1 | BTN_C | TS02_66_160_BK_160_LCR_D:SW_TS02-66-160-BK-160-LCR-D | S6 |
| 1 | CHG | LED_THT:LED_D3.0mm | D2 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | ESP32-S3-WROOM-1 | VirtualPetBoardV1:ESP32-S3-WROOM-1-Custom | U1 |
| 1 | HC-1.25-2PWT | easyeda2kicad:CONN-SMD_2P-P1.25-HC-1.25-2PWT | CN1 |
| 1 | LOGO | LOGO | G*** |
| 1 | PGOOD | PCM_JLCPCB:D_0805 | D1 |
| 1 | RESET | PCM_JLCPCB:SW_TS-1088-AR02016 | S1 |
| 1 | R_Photo | OptoDevice:R_LDR_5.1x4.3mm_P3.4mm_Vertical | R18 |
| 1 | SLW-864574-5A-RA-N-D | SLW-864574-5A-RA-N-D:SW_SLW-864574-5A-RA-N-D | S7 |
| 1 | SMT-0540-T-9-R | SMT-0540-T-9-R:XDCR_SMT-0540-T-9-R | LS1 |
| 1 | TLV75533PDBV | Package_TO_SOT_SMD:SOT-23-5 | U3 |
Similar boards
- 2 layers85 × 109 mm

- 2 layers85.5 × 70 mm

V0-Replay-26 PCB A
temporal-community/badge.temporal.io
Open-source firmware, hardware files, docs, and community app registry for the Temporal Replay 2026 Badge.
211 parts8MIT - 4 layers82 × 70 mm

Temporal Badge CHARLIE
Architeuthis-Flux/Temporal-Replay-26-Badge
Community firmware for the Temporal Replay 26 badge
208 parts5Unlicense - 2 layers76.5 × 76.5 mm

- 2 layers90.5 × 50 mm

Main control board
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
42 parts1.1k - 2 layers68 × 54 mm

Extruderevolved
bassamanator/everything-sovol-sv06
A repository containing specifications of the Sovol SV06 3D printer. ⭐ Star to support this work!
10 parts465GPL-3.0 - 2 layers40 × 40 mm

- 2 layers68 × 54 mm

Extruderevolved
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915
Questions
How big is the PixelPetBoardV1 PCB?
It measures 51.5 × 44.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the PixelPetBoardV1 use?
63 parts, built around the ESP32-S3-WROOM-1-N8, BMI323, BQ24079RGT and TLV75533PDBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PixelPetBoardV1 KiCad files?
From the a-bettilyon/pixel-pet repository on GitHub, at the commit this page was made from: the board is hardware/PixelPetBoardV1.kicad_pcb and its schematic hardware/PixelPetBoardV1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PixelPetBoardV1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask a-bettilyon before reusing the design.