Skip to the content
2 layers40 × 40 mmPN532, the printed circuit board in 3D

PN532 (HSU) drivers for ESP32 using ESP-IDF, and full PCB design for NFC reader.

Size
40 × 40 mm
Copper layers
2
Thickness
0.8 mm
Parts
55
Nets
43
Pads
334
Tracks, vias
288, 33
Pours
11
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
19 Jun 2022
Updated
18 Jun 2022

Overview

PN532 is an open-source printed circuit board by mgalea, from the mgalea/ESP32-PN532 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 40 × 40 mm with 55 parts on 43 nets, routed with 288 tracks and 33 vias.

It is built around the BAV99S. Its parts include 19 capacitors, 15 resistors, 6 diodes, 3 ICs and 2 connectors.

Main components

1

README

README.md

ESP32-PN532

PN532 (HSU) library

  • Platform: ESP-IDF (e.g. ESP32)
  • Can work with DESFireAES library for NXP MIFARE DESFire EV1 cards
  • See include file for details of functions

Includes KiCad PCB design for PN532 based NFC reader board and 3D case designs. Unlike some NFC boards this includes three traffic light LEDs, a tamper switch, and external contacts for a door bell push, all accessable as GPIO over the HSU connection.

222646

Copyright © 2019-21 Adrian Kennard, Andrews & Arnold Ltd. See LICENCE file for details. GPL 3.0

Parts

55
QtyValueFootprintReferences
60.1uFRevK:C_0603C7, C9, C11, C12, C14, C18
6100RRevK:R_0603R8, R9, R10, R12, R13, R14
30RRevK:HiddenR1, R2, R3
310KRevK:R_0603R6, R11, R15
34.7uFRevK:C_0603C10, C13, C15
3BAV99SRevK:SOT-363_SC-70-6D4, D5, D6
2160pF 1%RevK:Cx2_0603C1, C2
2220pFRevK:C_0603C5, C6
222pFRevK:C_0603C16, C17
222pF 1%RevK:C_0603C3, C4
2560nHRevK:L_1206_1008L1, L2
2MountingHoleRevK:ISO7380-M3-NoPadH1, H2
2QRRevK:QR-PN532U2, U3
11K 1%RevK:R_0603R5
11nF 2%RevK:C_0603C8
120KRevK:R_0603R7
127.12MHzRevK:Crystal-3.4x2.7Y1
12K7 1%RevK:R_0603R4
133pFRevK:C_0603C19
1ARevK:STP_156120xx7530D2
1AJKRevK:AJKAJK1
1BellRevK:PinHeader_1x02_P2.54mm_VerticalJ1
1GRevK:STP_156120xx7530D1
1I1RevK:SolderJumper3JP1
1PN532RevK:QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mmU1
1PN532-AntennaRevK:PN532-Antenna5A1
1RRevK:STP_156120xx7530D3
1SPOXRevK:Molex_MiniSPOX_H4VJ2
1TAMPERRevK:SW_PUSH_6mm_SMDSW1
1TestPoint_2PoleRevK:PN532-RF-TestTP1

Similar boards

  • 4 layers110.7 × 69.8 mmSgb mbc5 1-4, the printed circuit board in 3D

    Sgb mbc5 1-4

    MouseBiteLabs/Super-Game-Boy-Plus

    A replacement circuit board for improving the Super Game Boy, or for creating a standalone Game Boy game for the SNES.

    95 parts41CC-BY-SA-4.0
  • 4 layers126 × 66 mmPanel, the printed circuit board in 3D

    Panel

    calithameridi/corevus

    High-flexibility, low-cost mechatronics controller for 3D printers

    634 parts25
  • 2 layers55 × 25 mmHeadless tef lite, the printed circuit board in 3D

    Headless tef lite

    FMDX-org/headless-tef-lite

    Small low cost Headless TEF variant.

    97 parts10CERN-OHL-W-2.0
  • 2 layers20.8 × 31.4 mmOneMoreThermistor, the printed circuit board in 3D

    OneMoreThermistor

    cbc02009/OneMoreStupidThermistor

    For when you need just one (or two) more stupid thermistor ports on your printer. This board takes an MCU of the Xiao or adafruit QT PY formfactor

    13 parts7GPL-3.0
  • 4 layers130.5 × 171 mmUniMixBase, the printed circuit board in 3D

    UniMixBase

    jarekkt/UniController

    This is a off-spin from my commercial controller for industrial ink printers. It is designed for pick & place machines controlled by OpenPnp

    157 parts6
  • 2 layers14 × 28 mmShelly, the printed circuit board in 3D

    Shelly

    AndreTeixeira1998/Shelly-Tasmotizer-PCB

    PCB design for serial Tazmotizer programmer for Shelly power modules

    26 parts
  • 6 layers343.6 × 83.8 mmPFM Controller V4, the printed circuit board in 3D

    PFM Controller V4

    everettpenne/PFMV4_Prelim_Files

    PFM Controller V4 files for independent design review. For application controlling the Limiter, HVPS, and Transrex supplies.

    514 parts

Questions

How big is the PN532 PCB?

It measures 40 × 40 mm and has 2 copper layers, 0.8 mm thick.

What parts does the PN532 use?

55 parts, built around the BAV99S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PN532 KiCad files?

From the mgalea/ESP32-PN532 repository on GitHub, at the commit this page was made from: the board is KiCad/PN532.kicad_pcb and its schematic KiCad/PN532.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the PN532 design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).